I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-40%
1N5819 Schottky Diode
Original price was: ₹6.00.₹3.00Current price is: ₹3.00. inc. GST
55NF06 N-Channel Power Mosfet Transistor 60V 55A
Original price was: ₹25.00.₹20.00Current price is: ₹20.00. inc. GST
IN5408 Diode
Original price was: ₹5.00.₹3.00Current price is: ₹3.00. inc. GST
- Average forward current is 3A
- Forward Voltage drop is 1V @3A
- Non-repetitive Peak current is 200A
- Peak Reverse current is 10uA.
- Repetitive reverse voltage is 1000V
- Available in DO-201 Package
Description
IN5408 Diode designed as a high forward current and reverse voltage with a power dissipation of 6.25W. Hence also known as a power diode. 1N5408 Diode offers a maximum current carrying capacity is 3A and it can withstand peaks up to 200A. Hence these diode circuits designed specifically for less than 3A. Meanwhile, it provides a reverse current of 10uA which is quite negligible. These diodes have a slow recovery time so in modern electronics it is being replaced by other advanced diodes. These diodes manufactured in DO-201 Package and provides a repetitive reverse voltage of 1000V.
A diode designed as a semiconductor device specifically acts as a one-way switch for current. It permits flow of current easily in one direction, but severely restricts current from flowing in the opposite direction. The two terminals of the diode known as the anode and cathode. The most common applications of diode includes converting AC to DC, isolating signals from a supply, and mixing signals. The 2 sides of the diode doped differently. One side is the “p-side”, this features a positive charge. The opposite side reffered as the “n-side”, this has a negative charge. Both of these sides are layered together to form what is known as the “n-p junction” where they meet. The figure below indicates the diode symbol:
Applications of Diode
- Used to prevent reverse polarity problem
- HV supplies
- Half Wave and Full Wave rectifiers
- Used as a protection device
- Current flow regulators
Reviews (0)
Shipping & Delivery
Related products
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.