I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
LM1458 Dual Operational Amplifier IC
₹23.00 Original price was: ₹23.00.₹15.00Current price is: ₹15.00. inc. GST
- High Performance Dual Operational Amplifier
- Differential Input Voltage: ±30V
- Input Offset Voltage Max:Â 6mV
- Input Offset Current Max:Â 200nA
- Input Bias Current Max:Â 500nA
- Common-Mode Rejection Ratio:Â 90dB
- Max. Power Dissipation:Â 500mW
- Output Resistance: 75Ω
- Rise Time: 0.3µs
- No Frequency Compensation Required
- Low-Power Consumption
- Short-Circuit Protection
- Wide Common-Mode and Differential Voltage
- No Latch Up When Input Common Mode
Ranges Range is Exceeded - Package:Â DIP-8
The LM1458 is a dual operational amplifier IC. A common bias network and power supply lines are shared by the two amplifiers. Aside from that, their operation is fully self-contained. The IC is packaged in an 8-pin dual in line hermetically sealed IC package (DIP). The LM1458 can operate in a broad range of temperatures and voltages. The IC’s output is directly compatible with nearly all CMOS, PMOS, and NMOS devices. Many other benefits of the IC include strong noise immunity, short circuit protection, and low power dissipation.
An operational amplifier is a voltage amplifier that is designed to work with external feedback components such as resistors and capacitors connected to its I/O terminals. By virtue of the various feedback topologies, whether resistive, capacitive, or both, these feedback components define the resultant function or “operation” of the amplifier.
LM747 Dual Operational Amplifier IC offers a unity-gain bandwidth of 1MHz. The frequency range up to which a unity-gain amplifier may run without significantly distorting the signal is known as the unity-gain bandwidth. The slew rate refers to how quickly an operational amplifier may vary its output in response to changes in the input. A similar bias network and power supply lines are shared by the LM747 general purpose twin operational amplifiers. Aside from that, their operation is fully self-contained. Instead of 55°C to +125°C, the LM747 operates in the temperature range of 0°C to +70°C.
Application
- Comparator
- Multivibrator
- DC Amplifier
- Summing Amplifier
- Integrator or Differentiator
- Narrow Band or Band Pass Filter

Related products
10 Segment Led Bargraph Light Display Red, Yellow, Green, Blue
- LED type: LED array bar
- Segments: 10
- LED Colour: Green
- Housing color: white
- Reverse voltage: 5V
- Forward Voltage - Typical: 1.85 V
- Forward Voltage - Maximum: 2.2 V
- DC forward current: 30mA
- Peak forward current: 175mA
- Power dissipation: 75mW
- Peak wavelength: 590nm
- Luminous Intensity Typical: 120 Mcd
- Operating temperature: -40°C to +85°C
- 10 Separately Controlled LED's
- High Brightness
- High-Intensity Green Output
- Ideal for Audio and Meter Displays
- Economically priced
- Easy to Mount
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
GSM Antenna
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
SIM Card Holder
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.

Reviews
There are no reviews yet.