I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-25%
LM1267 RGB Video Amplifier IC
Original price was: ₹85.00.₹65.00Current price is: ₹65.00. inc. GST
LM2577 Step-Up Voltage Regulator IC
Original price was: ₹200.00.₹185.00Current price is: ₹185.00. inc. GST
LM2576 3Amp Step-Down Voltage Regulator IC
Original price was: ₹60.00.₹45.00Current price is: ₹45.00. inc. GST
- Switch mode step down voltage regulator
- Output Voltage for fixed voltage regulator: 3.3V, 5V, 12V or 15V
- Output Voltage for Variable type regulator: 1.23V to 37V
- Output Current: Upto 3A
- Maximum Input Voltage: 40V
- In-built Thermal Shutdown and Current Limit Protection
- Internal Oscillator: 52-kHz (Fixed Frequency)
- Available in TO-220 and TO-263 packages
- Adjustable output, reference voltage ±2% max over line and load conditions
- Requires only 6 external components
Description
The LM2576 3Amp Step-Down Voltage Regulator IC is a monolithic integrated circuit featuring a set of regulators that execute all step-down switching regulator operations. The output voltages of these devices are set at 3.3V, 5V, 12V, and 15V. Depending on the input-output voltage choices, this buck converter lowers down the input voltage from 4V to 40V to any lower output voltage from 1.3V to 27V at a continuous current of 3 A. The output voltage will always be lower than the input voltage since it is a buck converter. For the HV version, the LM2576 is an easy-to-use, nonsynchronous, step-down DC-DC converter with a broad input voltage range. It can also drive a load of up to 3A with great efficiency. But heat sinks used in a certain case when the output current required greater than 2.5(or output greater than 10W). Thus avoid thermal damages.
The switching frequency of the LM2576 step-down regulator modules is 52 kHz. As a result, smaller filter components with lower frequency requirements can be used. Excellent line and load control is provided by the LM2576 3A step-down. Internal frequency correction and a fixed-frequency oscillator are included in this module. As a result, external components are reduced, and power supply design is simplified. It has a 4% output voltage tolerance within defined input voltages and output load circumstances, and a 10% oscillator frequency tolerance.
The external shutdown has a 50-A standby current (typical). The output switch has cycle-by-cycle current limiting and thermal shutdown for complete protection in the event of a failure.
APPLICATIONS:
- Simple High-Efficiency Step-Down (Buck) Regulator
- Efficient Preregulator for Linear Regulators
- On-Card Switching Regulators
- Positive-to-Negative Converter (Buck-Boost
Reviews (0)
Shipping & Delivery
Related products
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay Module SSR-25DA 25A /250V 3-32V DC Input 24-380VAC Output
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 25A.
- Working voltage: 250V.
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Dimension: 6. 5Cm x 4. 5Cm x 2. 2Cm
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.