I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-20%
Back to products
6A SPDT ON ON Rocker Switch
Original price was: ₹25.00.₹15.00Current price is: ₹15.00. inc. GST
LM350K 3A Adjustable Voltage Regulator IC
Original price was: ₹125.00.₹100.00Current price is: ₹100.00. inc. GST
- Three-terminal 3 A adjustable voltage regulator
- Input-output voltage differential 35 V
- Operating junction temperature range 0 to 1250C
- 3 A output current
- Adjustable output down to 1.2 V
- Line regulation typically 0.005 %/V
- Load regulation typically 0.1 %
- Package : TO-3
- Line Regulation 3V ≤ (VIN − VOUT) ≤ 35V(2)
- Operating Temperature Range LM350A −40°C ≤ TJ ≤ +125°C, LM350 0°C ≤ TJ ≤ +125°C
- Lead Temperature Plastic Package (Soldering, 4 sec.) 260°C
- Reference Voltage 3V ≤ (VIN − VOUT) ≤ 35V, 10 mA ≤ IOUT ≤ 3A, P ≤ 30W
- Current Limit VIN − VOUT = 30V
- Ripple Rejection Ratio VOUT = 10V, f = 120 Hz, CADJ = 10 μF
Description
LM350K 3A Adjustable Voltage Regulator designed as the LM150 series of adjustable 3-terminal positive voltage regulators. It is capable of supplying a current more than 3A over a 1.2V to 33V output range. These are quite easy to use and needs only 2 external resistors to line the output voltage. Moreover, both line and load regulation are similar to discrete designs.LM350K 3A Adjustable transformer IC manufactured in standard transistor packages which are easily mounted and handled.
LM350K IC designed as a very rugged voltage transformer IC featuring thermal regulation, short circuit protection etc. This circuit designed as per the application notes in the datasheet and found as working very fine. Moreover, these circuit has improved ripple rejection and better stability compared to the elementary voltage regulator using an equivalent IC. The output voltage adjusted via POT R2. By adjusting R2 the output voltage often varied between 1.2V and 25V. When the output shorted, the diode D2 discharges capacitor C2. It is a 3A voltage regulator IC for DC adjustable power supply(1.25V to 35V), high-performance, with a couple of components.
In addition to higher performance than fixed regulators, the LM350K offers full overload protection available only in IC’s. Moreover, the IC chip designed with onboard current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal accidentally disconnected. An output capacitor are often added to enhance transient response, while bypassing the adjustment (LM350A) pin will increase the regulator’s ripple rejection.
​​APPLICATIONS:
- Adjustable Power supplies
- Constant Current Regulators
- Battery Chargers
Reviews (0)
Shipping & Delivery
Related products
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash
Reviews
There are no reviews yet.