“1/4W 5% Assorted Value Carbon Film Resistor Assortment Kit Set pack electronic diy kit” has been added to your cart. View cart

-7%

Click to enlarge

PIC12F508 Microcontroller IC

Original price was: ₹75.00.Current price is: ₹70.00. inc. GST

Maximum CPU Frequency: 4 MHz
Architecture: 8 bit
Program Memory (Flash): 0.75kb
RAM: 25 byte
Internal Oscillator: 4 MHz
of Pins: 8
Voltage: 2V – 5.5V
4 MHz Precision Internal Oscillator: – Factory calibrated to ±1%
In-Circuit Serial Programming™ (ICSP™) •
In-Circuit Debugging (ICD) Support
Power-On Reset (POR)
Device Reset Timer (DRT) •
Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation
Programmable Code Protection
Multiplexed MCLR Input Pin
Internal Weak Pull-Ups on I/O Pins
Power-Saving Sleep mode
Wake-Wp from Sleep on Pin Change
Selectable Oscillator Options:

– INTRC: 4 MHz precision Internal oscillator

– EXTRC: External low-cost RC oscillator

– XT: Standard crystal/resonator

– HS: High-speed crystal/resonator (PIC16F505 only)

– LP: Power-saving, low-frequency crystal

– EC: High-speed external clock input (PIC16F505 only)

LOW POWER FEATURES/CMOS TECHNOLOGY

Operating Current: – < 175 μA @ 2V, 4 MHz, typical
Standby Current: – 100 nA @ 2V, typical
Low-Power, High-Speed Flash Technology: – 100,000 Flash endurance – > 40 year retention
Fully Static Design
Wide Operating Voltage Range: 2.0V to 5.5V
Wide Temperature Range:

– Industrial: -40°C to +85°C

– Extended: -40°C to +125°C

Add to wishlist

Categories: Electronic Components & Hardwares, electronic-components-hardwares-components, Integrated Circuits (IC) Tags: IC, microcontroller, PIC Microcontroller, PIC12F508, PIC12F508 Microcontroller IC

Description

The PIC12F508 designed based on the Microchip Technology. These are low-cost, high-performance, 8-bit, fully static, with Flash-based CMOS microcontrollers. These microcontrollers employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions in this microcontroller exist in single cycle (200 µs) except for program branches, which also take two cycles. The PIC12F508 microcontroller devices provide better performance in an order of magnitude higher than their competitors in the same price category. Meanwhile, this PIC microcontroller comes with 12-bit wide instructions that are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. PIC12F508 is quite easy-to-use and also easy to remember instruction set reduces development time significantly.

This CMOS Microcontroller unit consists of 8 pins out of which 6 pins used as I/O pins. Moreover, it has Power-on-Reset (POR) as well as the Device Reset Timer (DRT) that eliminates the need for external Reset circuitry. In addition, it consists of an internal oscillator with 4Mhz frequency and can be configured in Power saving oscillator mode.

PIN DESCRIPTION

VDD: Positive Pin of MCU (+5V)
GP5/OSC1/CLKIN: Bidirectional I/O Pin or Crystal Input or External clock source input
GP4/OSC2: Bidirectional I/O Pin, or Crystal output.
GP3/MCLR/VPP: Input Pin or connected with a programmer, mostly with PicKit
GP2/T0CKI: Bidirectional I/O Pin, Clock Input to Timer 0.
GP1/CSPCLK: Bidirectional I/O Pin, or In-Circuit Programmer Clock Pin.
GP0/ICSPDAT: Bidirectional I/O Pin or In-Circuit Serial Programming Data Pin, used in Programmer.
VSS: Ground Pin of MCU

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PIC12F508 Microcontroller IC”

Shipping & Delivery

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.