I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
PIC12F508 Microcontroller IC
₹75.00 Original price was: ₹75.00.₹70.00Current price is: ₹70.00. inc. GST
- Maximum CPU Frequency: 4 MHz
- Architecture: 8 bit
- Program Memory (Flash): 0.75kb
- RAM: 25 byte
- Internal Oscillator: 4 MHz
- of Pins: 8
- Voltage: 2V – 5.5V
- 4 MHz Precision Internal Oscillator: – Factory calibrated to ±1%
- In-Circuit Serial Programming™ (ICSP™) •
- In-Circuit Debugging (ICD) Support
- Power-On Reset (POR)
- Device Reset Timer (DRT) •
- Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation
- Programmable Code Protection
- Multiplexed MCLR Input Pin
- Internal Weak Pull-Ups on I/O Pins
- Power-Saving Sleep mode
- Wake-Wp from Sleep on Pin Change
- Selectable Oscillator Options:
– INTRC: 4 MHz precision Internal oscillator
– EXTRC: External low-cost RC oscillator
– XT: Standard crystal/resonator
– HS: High-speed crystal/resonator (PIC16F505 only)
– LP: Power-saving, low-frequency crystal
– EC: High-speed external clock input (PIC16F505 only)
LOW POWER FEATURES/CMOS TECHNOLOGY
- Operating Current: – < 175 μA @ 2V, 4 MHz, typical
- Standby Current: – 100 nA @ 2V, typical
- Low-Power, High-Speed Flash Technology: – 100,000 Flash endurance – > 40 year retention
- Fully Static Design
- Wide Operating Voltage Range: 2.0V to 5.5V
- Wide Temperature Range:
​              – Industrial: -40°C to +85°C
– Extended: -40°C to +125°C
The PIC12F508 designed based on the Microchip Technology. These are low-cost, high-performance, 8-bit, fully static, with Flash-based CMOS microcontrollers. These microcontrollers employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions in this microcontroller exist in single cycle (200 µs) except for program branches, which also take two cycles. The PIC12F508 microcontroller devices provide better performance in an order of magnitude higher than their competitors in the same price category. Meanwhile, this PIC microcontroller comes with 12-bit wide instructions that are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. PIC12F508 is quite easy-to-use and also easy to remember instruction set reduces development time significantly.
This CMOS Microcontroller unit consists of 8 pins out of which 6 pins used as I/O pins. Moreover, it has Power-on-Reset (POR) as well as the Device Reset Timer (DRT) that eliminates the need for external Reset circuitry. In addition, it consists of an internal oscillator with 4Mhz frequency and can be configured in Power saving oscillator mode.
PIN DESCRIPTION
- VDD: Positive Pin of MCU (+5V)
- GP5/OSC1/CLKIN: Bidirectional I/O Pin or Crystal Input or External clock source input
- GP4/OSC2: Bidirectional I/O Pin, or Crystal output.
- GP3/MCLR/VPP: Input Pin or connected with a programmer, mostly with PicKit
- GP2/T0CKI: Bidirectional I/O Pin, Clock Input to Timer 0.
- GP1/CSPCLK: Bidirectional I/O Pin, or In-Circuit Programmer Clock Pin.
- GP0/ICSPDAT: Bidirectional I/O Pin or In-Circuit Serial Programming Data Pin, used in Programmer.
- VSS: Ground Pin of MCU

Related products
1/4W 5% Assorted Value Carbon Film Resistor Assortment Kit Set pack electronic diy kit
- 100% brand new and high quality.
- Fine workmanship and long service life.
- 1/4W carbon film resistor package.
- High precision and stability.
- Easy to use.
- Precision: 5%
- Error: 5%
- Values
- 10Ω, 15Ω, 22Ω, 33Ω, 47Ω, 68Ω, 100Ω, 220Ω, 330Ω, 470Ω, 1k, 1k5, 2k2, 3k3, 4k7, 5k6, 6K8, 8K2, 10K, 15K, 22K, 33K, 47K, 56K, 68K, 100K, 150K, 220K, 330K, 470K
- Package included: 150pcs
10 Segment Led Bargraph Light Display Red, Yellow, Green, Blue
- LED type: LED array bar
- Segments: 10
- LED Colour: Green
- Housing color: white
- Reverse voltage: 5V
- Forward Voltage - Typical: 1.85 V
- Forward Voltage - Maximum: 2.2 V
- DC forward current: 30mA
- Peak forward current: 175mA
- Power dissipation: 75mW
- Peak wavelength: 590nm
- Luminous Intensity Typical: 120 Mcd
- Operating temperature: -40°C to +85°C
- 10 Separately Controlled LED's
- High Brightness
- High-Intensity Green Output
- Ideal for Audio and Meter Displays
- Economically priced
- Easy to Mount
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
5 Pin RMC Connector
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
SIM Card Holder
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.

Reviews
There are no reviews yet.