I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
PL2303 USB TO TTL CONVERTER
₹300.00 Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
- USB specification 2.0 compliant with full-speed 12Mbps.
- Operation Level-Digital 5V
- Power Supply-External 5V
- Standard USB type A male and TTL 6pin connector.
- 6 pins for 3.3V, RST, TXD, RXD, GND & 5V.
- All handshaking and modem interface signals.
- Baud rates: 300 bps to 1.5 Mbps.
- Byte receives buffer; 640 bytes transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40.
- Simple serial communication.
- Router or ADSL firmware upgrade.
- Easy to use, RX to the MCU’s TX; TX to the MCU’s RX. and then connected to the GND. Without having to use the MAX232 conversion.
This PL2303 USB to TTL converter module is an integrated USB to TTL UART Converter module. This module consists of the PL2303 Bridge IC designed on basis of Prolific Technology. The PL2303 UART module is a simple solution to update the design of the RS-232 using minimal components and PCB space. PL2303 USB to TTL converter allows asynchronous serial data bus compliant with USB2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, with full modem control. As a result, this module doesn’t need any external components.
PL2303 is used as a standard serial port with Laptops that don’t have a standard serial port. It creates a virtual COM port using the USB on the PC. And this supports a standard baud rate of 300 bps to 1.5 Mbps for serial communication. The LED present in the data lines of the module indicates real-time data transfer status. This module consists of a 500 mA self-recovery fuse used for any protection purpose. PL2303 board is entirely coated by the high-quality transparent heat-shrinkable sleeve. This makes the PCB to insulation state from outside so that the board is not affected by any material shortcut burn.
PL2303 is used with a standard 0.1″ pitch terminal strip to connect directly to UART or I/O pins for easy access to your MCU. This module is compatible with 32-bit & 64-bit Windows, Mac OS 8 to OS X, Linux, and Android. These modules are reserved to operate in 3.3V and 5V pin interface, which makes it easier for the DDWRT of different voltage system that needs power.
Application of PL2303 Module
- Debug purpose in the development
- Microcontroller to PC communication
- Programming related purposes

Related products
1 CHANNEL 5V RELAY
- 1 channel relay board
- Operating voltage: 5V
- Maximum current: 2 A
- Relay contact current capacity of 10A @250 V AC/10A@ 30V AC
- configured as SINGLE POLE DOUBLE THROW( SPDT)
- LED status indicates relay ON/OFF state.
- Standard TTL level logic controlled
- One normally closed and one normally opened contact
- Compatible with any 5V microcontroller
- Dimension: 43*17*17mm
- Weight: 150gm
AVR ISP 10 Pin to 6 Pin Adapter Board
CH375B U-DISK Read Write Module USB interface communication SPI interface
PICkit 3.5 Compatible Programmer with USB Cable and Jumper Wire- PIC Kit
- Type: Debugger/Programmer
- Tool/Board Application: Debugging/Programming
- MCU Supported Families: Flash-based PIC MCUs
- Core Architecture: PIC, dsPIC
- IC Product Type: In-Circuit Debugger
- USB (Full speed 12 Mbits/s interface to host PC)
- Real-time execution
- MPLAB IDE compatible
- Built-in over-voltage/short circuit monitor
- Firmware upgradeable from PC/web download
- Supports low voltage to 2.0 volts (2.0v to 6.0v range)
- Diagnostic LEDs (power, busy, error)
- Read/write program and data memory of the microcontroller
- Erase of program memory space with verification
- Freeze-peripherals at breakpoint
- Program up to 512K byte flash with the Programmer-to-Go
- Easy to use Windows-based programming
- USB Interface
TL866II Plus Universal USB MiniPro USB Programmer for 15000+IC SPI Flash NAND EEPROM MCU PIC AVR
- High-Speed Programming - 12 Mbps
- Unique ultra-low power consumption
- Portable performance
- Programmable programming power supply
- Best overvoltage, overcurrent protection
- 40-pin universal pin
- Upgrade function
- 54/74F/LS/HC CMOS4000 series IC functional tests
- AVR microcontroller one-to-one soft encryption
- Unified and convenient user interface
- NAND Flash: Yes
- ISP for 24/93/25 MCU: Yes
- 25 NOR Flash Max. Capacity: 512M
- Multiprogramming: 4 programmers
- VPP Max. Voltage: 18 V
- VCC Voltage: 1.8 V to 6.5 V
- W29C020 P+V (s): 10.S+2.4S
- W25X80 P+V (s): 9.3S+1.7S
- W25W64 P+V (s): 69S+14.5S
- Device List: 15,000+
- Support simultaneously burn with 4 Programmers each computer
- Minimum Volume and the lowest Power Consumption and Do not Feel any Heat in Process.
- All chips do not need an external power supply, the low power consumption of its own to ensure that the USB port can provide enough power.
- Best internal 40 pins over-voltage protection, the strongest VCC/VPP 4-level overcurrent protection. The short-circuit do not reset the PC.
- Unique serial ICSP interface
- Test CMOS4000 74/54 series integrated circuit. Can be located in the gate circuit error.
- Chip auto serial number is the most complete and practical.
USB 2.0 TO SERIAL CONVERTER CABLE
USBASP PROGRAMMER
- No special USB controller required
- Programming speed is up to 5Kbytes/sec
- Working platform: Linux, Windows, Mac OS X
- Allows to read or write the microcontroller EEPROM, firmware, fuse bits, and lock bits
- No special controllers or SMD components are needed.
- Target is supported by the SCK option with a low clock speed (<1.5MHz)
- Programming status and Bus status are easily identified
- The easy interface is achieved by Header pins for various ISP header pins
- Dimension: 63.3*20.5*10.5mm
- Weight: 15gm
Xmate Zorro Wired USB Gaming Mouse for PC/Laptop/Mac – (Black)
- PC GAMING MOUSE COMPATIBILITY: Windows 10/8/7/Vista/XP/Win98SE/Win2000, Limited Mac OS support Works well with all major Computers/Laptop brands Asus, Dell, Hp, Lenovo, Dell, MSI and others
- Mechanical Button: 6 Buttons with different functions like the previous page and next page. If you wish you can turn on/off the colorful lights (press next page key + DPI key)
- 4 DPI Levels: Four color RGB breathing light cycle replacement. 4-type DPI rating controlled by touching the DPI button - Violet 800/Blue 1200/Purple 1600/Red 3200
- Excellent Performance with High Polling Rate: Xmate Zorro wired gaming mouse with 500Hz high polling rate ensures smooth movement offers reliable connectivity with smooth and responsive tracking
- Ergonomic Gamer Mouse: Made of ABS plastic, leather collar, anti-skid scroll wheel, rubber finish with mechanical switches & 1.5m nylon tough cable that stand up to tough gaming needs like FPS/PUBG/COD, etc
- 1-year warranty from the date of purchase, contact us at 040-67138844 (9am - 6pm, Monday to Friday & Saturday 9am - 1pm)
- Country of Origin: China

Reviews
There are no reviews yet.