I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Sold out
Back to products
PR53 215mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Description
The PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer designed with an SD-Card reader, a rotary encoder, and a 2004 LCD display. This PR34 2004 LCD Display can be easily connect it to your RAMPS board using the “smart adapter”. After connecting this controller panel to your RAMPS, there is no need to use pc anymore. The 2004 LCD Smart Controller supplies power for your SD card. Moreover, all functions like calibration, axes movements performed by just using the rotary encoder on the Smart Controller. Thus the 3D designs printed without PC, just with a g-code design stored on the SD card.
This 2004 LCD display is 20 Character x 4 Line LCD display. Using the “smart adapter” included in the module, it can be easily connected to the Ramps board. LCD2004 LCD Display provides a simple and cost-effective solution for adding a 20×4 White on RGB Liquid Crystal Display into your project. And also display comes with 20 characters by 4 line display has a very clear and high contrast white text upon a blue background/backlight.
In this LCD controller, we can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes. And also the SD card base on the back put the slicing file into the SD card and select the file on the LCD, thus printing can be processed.
Reviews (0)
Shipping & Delivery
Related products
16*2 GREEN (LCD DISPLAY MODULE)
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- Current consumption: 1mA
- Input leakage current:1micro ampere
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Each character build by 5*8 pixels
- Consist of 2 rows with each row has 16 characters
- Operating temperature:0 degree to 50 degree Celsius
- Low Current consumption
- Green Backlight
- Works with almost any Microcontroller
- Alphanumeric display
- Compact size and lightweight
- Easy to interface
- Dimension: 69.5*14.5mm
20/4 GREEN (LCD DISPLAY MODULE)
- Operating voltage: 5V
- Display format: 20 characters * 4 line
- Display mode: STN or FSTN
- Dot-matrix: 5*8 dots
- Character size: 2.95 * 4.75mm
- Character pitch: 3.55 * 5.35mm
- LCD driver IC: ST7066U
- 1/16 duty cycle
- Wide viewing angle and high contrast
- Works on both 8-bit parallel interface
- Operating temperature: -20 degree to 70 degree Celsius
- Low Current consumption
- Dimension: 98*60*13.6mm
- Compact size and lightweight
5” TFT for Raspberry PI
- Display Size: 5″
- Resolution: 800 x 480 pixel
- Supply Voltage: 5V @1A
- Touch: 4-wire resistive touch
- LCD DRIVER IC: ILI9486L
- Refresh rate：60HZ
- Good touch response
- Large viewing angle
- Fast response time
- Support backlight control for low power consumption
- Compatible with Raspberry Pi 3, Pi2, Model B/B+
- Not only for Raspberry Pi
- Not only for mini-PCs, it can also work as a computer monitor
- The monitor can work with standard HDMI devices (adjust output resolution to 800*480),
- Touch function is only available for Raspbian and Ubuntu systems.
- Touch panel function not supported---Retropie, Windows 10
- LCD Size：11mm*77.93mm
- Weight:175g
CD4055BE CMOS Liquid Crystal Display Driver IC
- CMOS Liquid Crystal Display Driver
- Number of Digits: 1
- Number of Segments: 7
- Maximum Power Dissipation: 500 mW
- Maximum Supply Current: 100 uA
- Output Current Max: 5.8mA
- No. of Outputs: 7
- No. of Pins: 16
- Logic IC Family: CD4000
- Logic IC Function: BCD To 7 Segment Decoder / Driver with Display Frequency Output
- Operating Temperature Range: -55°C to +125°C
- Supply Voltage Range: 3V to 18V
- Package: PDIP-16
I2C MODULE WITH 16*2 CHARACTER LCD
- Supply voltage: 5V
- Display mode: STN
- Display format: 16*2
- Input data: 4 bit or 8 bit (for LCD)
- I2C address: 0x20~0x27 (original address is 0x20,we can change it ourselves)
- Compatible with multiple communication logic levels: 2.8~5VDC
- Compatible for 16*2 LCD
- Serial I2C control of LCD display using PCF8574
- Allow data display via only 2 wires.
- Backlight and contrast adjustment by the potentiometer
- Supports 7 ASCII fonts, 5 graphic functions
- Supports 128 level backlight lightness adjustment.
- Support 64 level screen contrast adjustment
- Supports device address modification
- Dimension: 10*4*5cm
- Size: 150gm
MACH3 interface board
- Compatible Stepper Motor Driver - Max 5 2-phase Microstep controllers
- Driver type - Pulse and Direction signal control
- Wide input voltage range: 12-24V, and with anti-reverse function.
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Maximum support 5-axis stepper motor driver controllers
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Weight - Approx. 75g
- Dimensions - 90 * 70 * 20mm
NEMA 23 10.1 kg-cm
- Operating Voltage : 2.3 Volts
- Step Angle : 1.8°
- Holding Torque : 10.1 kg-cm
- Supply Current (A) : 2.8 Ampere/Phase
- Number of Leads : 4
- Inductance : 2.2 mH/Phase
- Resistance : 0.83 Ohm
- Rotor Inertia : 275 gm-cm2
- Weight (gm) : 650
- Detent Torque (kg-cm) : 0.36
- Frame Size (mm) : 57 x 57
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm) : 6.35
- Shaft Length (mm) : 20.6
- Step Angle Accuracy : ±5%
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Stepper Motor Nema 23 kg 7.2 kg Dual shaft
- Rated Voltage: 6.6 V
- Current/ phase: 1A
- Resistance/ phase: 6.6ohms
- Inductance/ phase: 8.2 mH
- Holding Torque: 7.2 kg-cm
- of Leads - 6
- Rotor Inertia - 275
- Weight: 0.65kg
- Detent Torque: 0.36 kg-cm
- Step Angle - 1.8°
- Step Angle Accuracy - ±5% (full step, no load)
- Resistance Accuracy - ±10%
- Inductance Accuracy - ±20%
- Frame Size (mm) - 57x57
- Shaft Length (mm) - 20.6
- Shaft Diameter (mm) - 6.35
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Reviews
There are no reviews yet.