I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-16%
TL084 General Purpose JFET Quad Operational Amplifier IC
Original price was: ₹36.00.₹24.00Current price is: ₹24.00. inc. GST
PT2258 6-Channel Electronic Volume Controller IC
Original price was: ₹100.00.₹70.00Current price is: ₹70.00. inc. GST
PT2253 Electronic Volume Controller IC
Original price was: ₹95.00.₹80.00Current price is: ₹80.00. inc. GST
-
CMOS Technology
-
Low Power Consumption
-
Operating Voltage Range : Vcc = 6 ~ 12 V (Backup Voltage is up to 4 V)
-
0dB to -68dB attenuation controlled by 2dB/step
-
2 Channels in each chip
-
Capable to control attenuation by a built-in oscillator and Up/Down Pin
-
Single Power Supply or Dual Power Supplies of (+) and (-) can be used
-
Wide Frequency Response Range
-
Very Low Harmonic Distortion
-
Available in 16 pins, DIP Package
Description
The PT2253A is an electronic volume controller IC that uses CMOS technology and is specifically built for audio equipment. It has two built-in channels, making it excellent for both mono and stereo sound applications. To name a few features, the PT2253A has a wide frequency response range and very low harmonic distortion, ensuring a highly effective and stable performance. Data is sent to and from the CPU to the PT2253 through the SDA and SCL of this IC. The BUS Interface’s SDA and SCL functions. The pull-up resistors should be linked to the positive supply voltage as much as possible. The pin assignments and application circuit for this volume controller IC have been improved for ease of PCB layout and cost savings.
To increase and reduce loudness, all audio amplifiers require a mechanism. Mechanical pieces, such as a potentiometer, are used in the majority of such devices. Furthermore, this electrical Volume Controller IC is commonly utilised to produce a digitally controlled audio controller. This is a very basic gadget IC that is used to regulate the audio output from an amplifier electronically.
APPLICATIONS
- Audio Equipment Volume Control
- Traditional VR Replacement
Reviews (0)
Shipping & Delivery
Related products
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
ADXL 335 Accelerometer IC
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
- 8V- 3.6V single-supply operation
- Integrated X, Y, and Z axis accelerometer on a single chip
- X and Y axis has a 0.5Hz to 1600Hz bandwidth
- Z axis has a 0.5Hz to 550Hz bandwidth
- Hermetically sealed for temp and humidity resistance
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.