I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Generic SIM900 GPRS/GSM Development Extension Board Shield Quad-Band Kit for Arduino
Original price was: ₹1,100.00.₹1,000.00Current price is: ₹1,000.00. inc. GST
QC3.0 QC2.0 USB DC-DC Buck Converter Step Down Module Fast Quick Charger Circuit Board
- Input voltage: 6V-32V.
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
- Output voltage cable compensation function.
- Conversion efficiency: 90%-97%.
- Support multiple fast-charging protocols.
- Input overvoltage and under-voltage protection.
- Input overcurrent protection.
- Output overcurrent, short circuit protection.
- Machine over temperature protection.
- Support fast charge agreement
- Support DCP protocol, BC1.2.
- Support Huawei Fast Charge Protocol FCP/SCP.
- Support Huawei Fast Charge Protocol AFC.
- Support Spreadtrum Fast Charge Protocol SFCP.
- Support QC2.0 and 3.0.
- Support MTK PE1.1/PE2.0
Description
This is QC3.0 QC2.0 USB DC-DC Buck Converter Step down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V. This module supports fast charging protocol for BC1.2, iPhone, also Samsung agreement for Qualcomm QC2.O and QC3.O. This step-down buck converter supports multiple fast-charging protocols along with output voltage wire compensation. And also it provides a conversion efficiency 90% to 97%.
This DC to DC buck converter steps down the input voltage from 6V ~ 32V to any lower output voltage of default 5V, also automatically adjusts between 3-12V after triggering fast charge. Thus it offers an output power of up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.) depending on the input-output voltage settings. Moreover, this module features Input overvoltage, under-voltage protection, Input/output over-current protection, short circuit protection, and Over-temperature protection. Thus makes it ideal for a wide range of applications. It provides a switch-mode power supply function with high efficiency compared to the popular three-terminal linear regulators, especially with higher input voltages.
Support fast charge agreement:
- Support DCP protocol, BC1.2.
- Support Huawei Fast Charge Protocol FCP/SCP.
- Support Huawei Fast Charge Protocol AFC.
- Support Spreadtrum Fast Charge Protocol SFCP.
- Support QC2.0 and 3.0.
- Support MTK PE1.1/PE2.0
Applications :
- Solar panel to phone charging.
- Car charging retrofit.
- Driving recorder power supply.
- Home power supply, smart plug modification.
- Fast charge adapter.
Reviews (0)
Shipping & Delivery
Related products
DPS3003 Constant Voltage Current Step-down Programmable Power Supply Module
- Input voltage range: 6V to 40V
- Output voltage range: 0V to 32V
- Output current: 0 to 3.000A.
- Output power range: 0-96W.
- Open size: 71mm*39mm.
- Output voltage resolution: 0.01V.
- Output current resolution: 0.001A.
- Output Voltage accuracy: ± (0.5% + 1 digits)
- Output Current accuracy: ± (0.5% + 2 digit)
- Dimension: 79*43*41mm
- Weight: about 90g.
LM2596 2A Buck Step-down Power Converter Module DC 4 ~ 40 to 1.3-37V LED Voltmeter
- Input Voltage: 4 - 40V DC
- Output Voltage: 1.3 - 37V DC
- Output Current: 2A Rated, (3A maximum with heat sink).
- Switching Frequency: 150 kHz.
- Input reverse polarity protection.
- Built-in output short protection function.
- Voltmeter Resolution: ±0.1V
- Voltmeter Digital Display Range: 0v-45v
- High precision multi-turn potentiometer to set to the desired value
- Led Digital Voltmeter Tube, The Accuracy Is Adjustable Function, Can Be Aimed At Your Multimeter Adjustable Accurate.
- Press the key "S1" to let the display show the input or output voltage. when the green led light, it shows output, the red shows the input.
- Size :65*35mm
LM2596 3A STEP DOWN MODULE
- Module properties: non isolated constant voltage module
- Rectification : non synchronous rectification
- Input voltage: 4.5V-35V
- Output voltage: 1.3V-30V
- Output current: 3A maximum
- Conversion efficiency: 92%
- Switching frequency: 150KHz
- Output ripple: 50mV 20M bandwidth
- Load regulation: +/- 0.5%
- Voltage regulation:” +/-2.5%
- Operating temperature: -40 degree to 85 degree Celsius
- Dimension: 48*23*14mm
LM317 DC-DC STEP DOWN CONVERTOR
- Output current: 1.5A(min), 2.2A(typical)
- I/O voltage differential (v1-v0): 40V DC
- Adjustable output voltage range: 1.2V-37V
- Voltage input: 4.2V-40V
- Switching frequency: 100 MHz
- 80 db ripple rejection
- Input method: VIN input is positive, GND input negative
- Output method: VOUT output positive, GND output negative
- Operating temperature: 0 degrees to 125 degree Celsius
- Dimension: 35.6*16.8mm
Mini 360 STEP DOWN BUCK CONVERTER POWER MODULE
- MPS MP2307DN buck regulator IC
- Design Non-isolated buck
- Rectification: synchronous rectification
- Input voltage: 4.75V-23V
- Output voltage: 1.0V-17V
- Output current Peak: 3A, continuous 1.8A
- Conversion efficiency: 96%
- Switching frequency: 340KHz
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no load)
- Load regulation: ± 0.5%
- Voltage regulation: ± 2.5%
- Operating temperature: -40 ° C to + 85 ° C
- Dimensions: 17 * 11 * 3.8mm
MT3608 2A MAX DC-DC STEP UP POWER MODULE BOOSTER
- Input voltage: 2V-24V
- Output voltage: 5V-28V
- Output current: 2A
- Efficiency: 96%
- Fixed switching frequency: 1.2MHz
- Integrated 80mohm power MOSFET
- Internal compensation
- Automatics pulse frequency modulation mode
- Operating temperature: -40 degree to 90 degree Celsius
- Low-cost converter module
- Simple to adjust to get desired increase I voltage
- Can source a good amount of current
- Dimension: 37*17*7mm
- Weight: 4gm
XL4015 5A STEP DOWN WITH DISPLAY
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree to + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- LED to indicate power status
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
YHDC SCT013-000 100A SWITCHING TYPE CURRENT TRANSFORMER
- Non-invasive current transformer
- Input current: 100A
- Frequency: 50Hz-150KHz
- Core material: Ferrite
- External material: ABS
- Suitable for lighting equipment, current measurement, AC motors, air compressors, and protection
- Two forms of output current
- Dielectric strength 6000V AC/1min
- Mechanical strength: not less than 100 times during opening and closing
- UL94-V0 flame retardant property
- Non linearity +-3% (10%-120% rated input current)
- Output plug: 3.5mm
- Working temperature: -25 degree TO 70 degree Celsius
- Dimension: 60*30*20mm
Reviews
There are no reviews yet.