I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-13%
10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor + Controller
Original price was: ₹9,000.00.₹8,000.00Current price is: ₹8,000.00. inc. GST
24V 36V 48V 72V Scooter E-Bike Electric Throttle Grip Handlebar LED Digital Meter - Orange Color
Original price was: ₹2,500.00.₹2,000.00Current price is: ₹2,000.00. inc. GST
Ramps 1.6 For 3D Printer Parts
Original price was: ₹800.00.₹700.00Current price is: ₹700.00. inc. GST
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
- Design of Pololu plate pin socket can be easily replaced or removed for future design.
- I2C and SPI pins are available for future expansion.
- Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
- LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendel.
- Dimension: 101.5 * 60.5mm
Description
RAMPS 1.6 is optimized and designed based on RAMPS1.4 by Biqu R & D team. RAMPS 1.6 interface board has a more powerful SMT MOSFET driver (up to 218W). The Structure of RAMPS 1.6Â almost the same as Ramps 1.5. The difference is Ramps 1.6 has new 2pin connectors. This is more simple and convenient to connect, also will not be burnt easily. These connectors designed as gold-plated and have a rated current of 3A, which is very compact.
Ramps 1.6 consists of a good Heatsink above the MOS tube in order to give a better function to heat dissipation. They change the original plug-in MOS tube to a patch-type MOS tube in order to solve the problem of plug-in MOS. The RAMPS 1.6 become a control board with powerful upgrade capability and scalable modularity due to its multiple extended interface and replaceable parts functions. It works as a controller board when the pins on the back of the board connected to the Arduino Mega and the front connected to stepper motor drives.
This module can Supports up to 5 motor drivers with the standard A4988 / DRV8825 Pololu interface. Moreover, this Simple and convenient Connection provides larger power than Ramps 1.5/1.4. Thereby offers better Heat Dissipation with a heat sink. RAMPS1.6 features multiple extended interface and replaceable parts. Thus make RAMPS1.6 functions as a control board with powerful upgrade capability and scalable modularity. A 5A additional security and component protection fusion is provided.
Note:
- Please don’t need to insert short-circuit cap under the driver When you plug in the TMC2100 driver,
- Compared to all drivers, TMC2130 is the quietest, no matters whether it is ramps 1.5 or ramps 1.6
Reviews (0)
Shipping & Delivery
Related products
12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers
- Material: stainless steel,
- Core: ceramic.
- Voltage: 12V.
- Power: 40W.
- Diameter: 6mm, Heating Length: 20 mm.
- Wire Length: 100 cm.
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
Arduino CNC Shield v3 Engraving Machine/3D Printer/A4988 driver GRBL compatible
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin Molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
CR-10 MK8 Drive Feed 3D Printer Extruder for Ender 3 CR-10 CR-10S CR-10 S4
- This extruder set is great for Creality 3D Ender 3 ender 3 pro-CR-10.
- Filament Materials: PLA/ABS/Wood/TPU/PTEG,
- Made of high quality metal material.
- Easy and convenient to use.
- With high quality and durable performance.
- Main material: MetalMounting screws.
- Aluminium MK8 extruder frame, with bored intake hole.
- Spring. Brass extruder drive gear.
- Special Bowden tube fitting (great improvement over stock).
- For all 1.75 mm filament.
- Right hand extruder kit
- MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
Creality 3D CR-10S DIY 3D Printer Kit 300*300*400mm Printing Size
- Printing size: 300*300*400mm
- Printing type: FDM (Melting touch stack molding technology)
- Body structure: Patent technology V-Slot aluminum bearing
- Nozzle diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Filament diameter: 1.75mm
- Plug: Default EU plug
- Print speed: Max.: 200mm / s, Normal: 80mm / s
- Each accuracy: 0.05-0.4mm (adjustable)
- Power supply: Input 110-220V switchable, output 24V
- Actual power: 160-200W
- Printing accuracy: ±0.1mm
- Environmental requirement: 10-30°C, humidity 20-50%
- Filament materials: PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient Color etc.
- Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
- Format: STL, OBJ, G-Code, JPG
- Printing method: SD card(off-line), contact to the PC(on-line)
- Operating system: Linux, Windows, OSX
- Operating software: CURA, Repetier-Host, simplify 3D
- Machine size: 490*600*615 mm
- Package size: 540*640*310 mm
- Machine net weight: 10.3kg
- Package weight: 14kg
NEMA 23 10.1 kg-cm
- Operating Voltage : 2.3 Volts
- Step Angle : 1.8°
- Holding Torque : 10.1 kg-cm
- Supply Current (A) : 2.8 Ampere/Phase
- Number of Leads : 4
- Inductance : 2.2 mH/Phase
- Resistance : 0.83 Ohm
- Rotor Inertia : 275 gm-cm2
- Weight (gm) : 650
- Detent Torque (kg-cm) : 0.36
- Frame Size (mm) : 57 x 57
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm) : 6.35
- Shaft Length (mm) : 20.6
- Step Angle Accuracy : ±5%
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine
- Current / Phase: 1.5A
- Step Angle(degrees): 1.8
- Phase: 2
- Type: Hybrid
- Certification: ROHS,CE
- Holding Torque: 4.2 KGCM
- Step angle accuracy: + - 5%(full step, not load)
- Resistance accuracy: + - 10%
- Inductance accuracy: + - 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature: -20deg ~+50deg
- Insulation resistance:100M Min,500VDC
- Insulation Strength: 500VAC for one minute
- (Lead Screw)
- Lead Screw Material: 304 Stainless Steel
- Color: Sliver
- Diameter: 8mm
- Length: 300mm
- Lead of thread: 8mm.
Reviews
There are no reviews yet.