I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
SB20100CT Dual Diode 20A 100V
₹45.00 Original price was: ₹45.00.₹35.00Current price is: ₹35.00. inc. GST
- Maximum Recurrent Peak Reverse Voltage VRRMÂ =100V
- Operating and Storage Temperature Range TJ = -50 to +125 °C
- Maximum DC Blocking Voltage VDCÂ =100V
- Low power loss, high efficiency
- Low forward voltage, high current capability
- High surge capacity
- For use in low voltage, high frequency inverters free wheeling, and polarity protection applications
SB20100CT Diode designed as a Schottky barrier chip that offers a low forward voltage drop of 0.85v, and a high forward current of 20A. Basically, these types of diodes have Maximum Recurrent Peak Reverse Voltage of 100v with low power loss. It operates on the Schottky Barrier principle. Schottky barrier indicates that a potential barrier of electrons generated at a metal-semiconductor junction.
The Schottky Barrier rectifier diode widely used in RF applications like a mixer or detector diode. Due to its low forward voltage drop features makes crucial to lower levels of power loss contrasted to normal PN junction diodes. Thus makes it ideal for power applications like rectifier.
In this schotkey diode, a connection formed between metal and semiconductor to form the Schottky barrier. In which the metal side functions as an anode and n-type semiconductor works as a cathode. The forward voltage of the diode depends on the selection of combination of the metal and semiconductor. Both p-type and n-type semiconductor can increase Schottky barriers. But p-type semiconductor has a low forward voltage contrast to the n-type semiconductor.
As a forward voltage is inversely proportional to outflow current, that is if this voltage is low then the reverse outflow current is high which is not preferable. Hence, we are using n-type semiconductor material in this diode. Generally, diodes use platinum, tungsten or chromium, molybdenum, palladium silicide, platinum silicide, gold etc. as metals.
As shown in the below figure, when the voltage applied to the diode in such a way that the metal +Ve with respect to the semiconductor. It is a unipolar device as it has electrons as majority charge carriers on both sides of the junction. When these two comes in contact with each other, electrons start to flow in both directions across the metal-semiconductor interface.

APPLICATIONS
- Suited for use in high frequency SMPS and inverters
- Can be use as freewheeling diode

Related products
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,

Reviews
There are no reviews yet.