I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-17%
MAX3232 RS232 TO TTL CONVERTER
Original price was: ₹180.00.₹150.00Current price is: ₹150.00. inc. GST
SPEED MEASUREMENT SENSOR
Original price was: ₹175.00.₹150.00Current price is: ₹150.00. inc. GST
SOUND SENSOR
Original price was: ₹150.00.₹125.00Current price is: ₹125.00. inc. GST
- IC Chip: LM393
- Operating voltage: 3.3V-5V
- operating current: 4-5 mA
- Voltage gain 26 dB (v=6v, f=1khz)
- Sensitivity of the microphone (1khz) :52 to 48 dB
- The impedance of the microphone: 2.2k ohm
- Frequency of microphone: 16 to 20 kHz
- Signal to noise ratio: 54 dB
- Signal output indication
- The output is digital.
- Single-channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound.
- Dimension:45*17*9mm
- Weight: 5gm
Description
The sound sensor is one of the most prominent sensors used in the electronics system nowadays. A sound sensor detects the intensity of sound and converts it into an electrical signal. This module includes a Microphone, a Peak detector, and an Amplifier. In this converter IC, we use LM393 Op-amp that is highly sensitive to sound. When the sensor detects a sound it is processed and the output voltage signal is provided to the microcontroller for further processing. This module can detect noise levels at a range of decibels at 3 kHz-6 kHz frequencies, approximately where the human ear is sensitive.
PIN DESCRIPTION
- Pin1: (VCC) – 3.3V DC to 5V DC
- Pin2 🙁 GND) – This is a ground pin
- Pin3 🙁 DO) – This is an output pin
- Pin4: ( A0 ) – Analog output pin
The working of the sound sensors is similar to that of the human ear. The microphone presents in the sensors uses the vibration generated and convert it into current or voltage. When the sound signal hits the diaphragm the magnet present within the sensor undergoes vibration, as a result, the current stimulates from the coil.
This converter IC consists of an inbuilt potentiometer to adjust the set point for the sound level. The analogue/digital output pin of the module is connected to the analogue/digital pin of the microcontroller. When the sound level exceeds a threshold value, the LED turns ON, and output sets to low.
APPLICATIONS:
- Security system for Office or Home
- Spy Circuit
- Home Automation
- Robotics
- Smart Phones
- Ambient sound recognition
- Audio amplifier
Reviews (0)
Shipping & Delivery
Related products
1 CHANNEL 12V RELAY
- 1-Channel relay interface board
- Operating voltage: 12V DC
- Provide high current relay of 15A
- For quick and easy connection high-quality screw terminals provided
- Can control both AC & DC appliances
- LED status indicates relay ON/OFF state.
- High current relay of 10A @250 V AC/10A@ 30V DC
- Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
- For easy accessibility input signal pin connected to burg sticks
- Dimension: 43*17*17mm
- Weight: 150gm
2 CHANNEL 5V RELAY
- High current relay
- Two LED S to indicate relays ON/OFF status
- Low-level trigger expansion board
- Opto isolation circuitry
- Works with logic level signal 3.3V or 5V devices
- Can be used as normally open (NO) or normally closed (NC)
- Back EMF protection
- Ensures diode current protection
- AC control voltage: 250v @mx10A
- DC control voltage: 30V @max 10A
- Easy installation and fixing
4 CHANNEL 5V RELAY
- 4-Channel relay interface board
- Operating voltage range: 3.3V to5V
- Maximum current: 10A
- Supply current: 20 mA
- High current relay of 10A @250 V AC/10A@ 30V DC
- Control signal: TTL level
- For quick and easy connection high-quality screw terminals provided
- Pull-down circuit to avoid malfunction
- Power supply indicator
- Can control both AC & DC appliances such as DC motors, solenoid valves, lamps, etc.
- LED status indicates relay ON/OFF state.
- Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
- For easy accessibility input signal pin connected to burg sticks
- Operating temperature: -40 to 85 degrees Celsius
- Dimension: 76*56*17mm
- Weight: 7gm
4*3 MATRIX KEYPAD
- Operating voltage: 12V DC
- The maximum voltage across each button: 24v
- The maximum current across each button: 3mA
- Ultra-thin design
- Adhesive backing provides easy integration
- Easy communication with any microcontroller
- Flexible
- Only 7 microcontroller pins required to access 12 keys
- High price-performance ratio
- Allows microcontroller to scan 8 output pins to check which 16 button
- Long life
- Maximum operating temperature: 0 degrees to 50 degrees Celsius
- Dimension: 70*77*1mm
- Weight: 7.5gm
DC-DC BOOST MODULE 0.9V-5V/5V 600MA USB MOBILE Power Supply Module
- Ultra-compact PFM chip
- Module properties: nonisolated step-up module
- Input voltage: 1v-5v
- Output voltage: 5.1v-5.2V
- Output current: rated 1A-1.5A
- Efficiency: 96%
- Output ripple: 30mv for 20M bandwidth
- Switching frequency: 500khz
- Voltage indication for led lights with load( for less than 2.7v led indicator off)
- Operating temperature:-40 degrees to 85 degrees Celsius
- Full load temperature rise: 30 degrees Celsius
- Quiescent current: 130ua
- Load regulation: +/-1%
- Voltage regulation: +/-0.5%
- Dynamic response speed: 5% 200Us
- Short circuit protection
- Reverse polarity protection
- Dimension: 2.5*1.8*1.8gm
- Weight: 400gm
DS3231 RTC MODULE
- Operating voltage of DS3231: 2.3 v to 5.5v
- 400Khz I2C interface
- Automatic power failure battery switch circuitry
- RTC counts seconds, minutes, hours, and year
- High precision clock chip DS3231
- Programmable square-wave output
- Chip temperature sensor accuracy:+/_3 degree Celsius
- Memory chip: AT24C32 with 32K storage capacity
- CR2032 battery backup with a high life span
- Low power consumption
- Register for ageing trim
- Dimension: 38mm*22mm*14mm
ISD1760 MODULE (75 sec)
- On-board ISD1760 chip
- Operating voltage: 5v
- 75 sec of audio playback
- Onboard microphone for direct recording
- Frequency: 6KHz or 8KHz
- Recording time: 6K/75 sec, 8K/60 sec
- Output all pin for chip control
- Easy interface with microcontrollers using 2.54mm spaced male pin headers
- High-quality natural voice reduction
- LED status indication
- Long recording time and multiple messages
- Simple operation and better voice quality
- Control not only by buttons but also by SPI from a microcontroller
- Recording, erase, play, FT, fast forward, reset volume buttons
- Dimension: 49*41.5mm
- Weight: 22gm
Wall Mount Sound Security Light Delay Sensor Control Lamp Switch Ac 220V
- Operating voltage: 220v
- Load Power: 30w
- Sound Control Sensitivity: 95db- 75db
- Light Control Induction: 6lux
- Delay Time: 30 seconds
- High-quality Energy Saving Auto Switch Controlled by Light and Sound
- Ideal Light Switch for use around bathroom, hallways, staircases and porches
- Easy to install
- Load Type: Control energy-saving lamps under 80W,incandescent under 60W,LED light under 30W
- Installation: Shut off the power, load must not short-circuit
- Light ON automatically when sound is detected in the dark, when in daytime or under strong light, circuit in the off state and the light does not turn on.
- Dimension: 6 X 5 x 2.6Cm
Reviews
There are no reviews yet.