I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
TESLA COIL
₹1,100.00 Original price was: ₹1,100.00.₹1,000.00Current price is: ₹1,000.00. inc. GST
- designed as an electrical resonant transformer circuit
- generate high-voltage, low-current, high-frequency alternating-current electricity
- used to generate artificial lighting, sounds like music Tesla coils in Entertainment and Education industry are used as attractions at electronics fairs and science museums
Tesla Coil designed as an electrical resonant transformer circuit to generate high-voltage, low-current, high-frequency alternating-current electricity. These Tesla coils used to perform the experiments in creating high-voltage electrical discharges. This Tesla coil comes with a power supply, a capacitor, and a coil transformer set so that voltage peaks alternate between the two, and electrodes set so that sparks jump between them through the air. The Tesla coil manufacture from Plastic Material and other handmade parts. Hence, these Tesla coils offers a wide range of applications and widely used in circuits to conduct innovative experiments in electrical lighting, phosphorescence, X-ray generation, high frequency alternating current phenomena, electrotherapy, and also the transmission of electrical energy without wires.
A Tesla coil defined as a radio frequency oscillator that drives the air-core double-tuned resonant transformer in order to produce high voltages with low currents. This coil capable of generating output voltages up to several million volts based upon the size of the coil. The Tesla coil designed based on the principle to achieve a condition called resonance. This coil consists of a primary coil and a secondary coil, with each coil having its own capacitor. The primary coil generates huge amounts of current into the secondary coil to drive the secondary circuit with maximum energy. Meanwhile, the fine-tuned circuit allows the current to shoot from primary to secondary circuit at a tuned resonant frequency. Also, the spark gap connects the coils and capacitors. The main function of the spark gap is to generate the spark to excite the system.
Applications of Tesla Coil
- Aluminum welding
- Cars use these coils for the spark plug ignition
- Created Tesla coil fans, also used to generate artificial lighting, sounds like music Tesla coils in Entertainment and Education industry are used as attractions at electronics fairs and science museums
- High vacuum systems and arc lighters
- Vacuum system leak detectors

Related products
125 KHz RFID CARD THICK
5000W Thyristor Voltage Regulator, Adjust Light Speed Temperature
Anti Spy Cell Phone Signal Bug Rf Camera GSM Device Detector 2600Mhz
- Colour: Black
- Detecting frequency: 100 - 2600mhz
- Effective range: 1-10m (32 - 32ft)
- Detect the harmful electromagnetic radiation
- Detect if there is more secret 5. 8 Ghz wireless web camera, wireless wiretap, and wire monitor.
- Ensure the privacy of your phone conversations up to a great extent
- Prevents eavesdropping, videotaping, fraud, protect personal privacy data and information confidential
- Dimensions:6*5*5cm
- Weight: 400gm
LOAD CELL 10 Kg
- Capacity: 10Kg
- Rated output(MV/V): 2.0±0.15
- Accuracy class: C2
- Maximum number of load cell verification intervals(N max): 2000
- Minimum number of load cell verification intervals(Vmin): E Max/5000
- Combined error(%RO): <±0.030
- Creep(%RO/30min): 0.03
- Temperature effect on sensitivity(%RO/°C): 0.0016
- Temperature effect on zero(%RO/°C): 0.003
- Zero balance(%RO): 1.0
- Input resistance(O): 402±6
- Output resistance(O): 350±3
- Insulation resistance(MO<50V>): 5000
- Recommended excitation voltage(V): 10~15
- Compensated temperature range(°C): -10~+40
- Operating temperature range(°C): -35~+80
- Safe overload(%RO): 150
- Ultimate overload(%RO): 200
- Load cell material: Aluminium
- Connecting cable: ø4.2*350mm
- Dimensions : 15.9 x 14.1 x 2.7 cm
- weight: 190gm
RFID 13.56MHz Card
- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 100mm (depending on antenna geometry)
- Operating frequency: 13.56MHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Typical ticketing transaction: <100 ms ( including backup management)
- User-definable access conditions for each memory block
- Data retention of 10 years.
- Write endurance 100 000 cycles
- Reading and writing distance: 2.5-10CM
- Reading and writing time: 1-2MS
- Working temperature: -20 ° -85 °
- Packaging materials: PVC, PET, 0.13 coins
- Packaging technology: ultrasonic automatic line / automatic welding
- Production standards: ISO 14443, ISO 10536
RFID Key Fob 13.56mhz
- Operating frequency: 13.56 MHz
- Operating temperature: -45 °C to 85 °C
- Storage temperature: -55 °C to 100 °C
- Response Frequency: 13.56MHz
- Chip type: FM1108 Fudan Chip
- Memory capacity: 8 kbit
- Material: ABS
- Standard deployment: Attached to key fob and used for ID control
- For sensing and identifying tagged people and objects
- It is not re-programmable
- Dimension(LxWxH): 43.7×30.5×5.3mm
RFID Tag Key Fob Keyfobs 125Khz
- Material: ABS
- Response Frequency: 125Khz
- 2kbps ASK
- Diameter: ~29mm
- Range: 0-10 cm
- Manchester encoding
- 32-bit unique ID
- Uses TK4100 chip which is compatible with EM4100
- 64-bit data stream [Header+ID+Data+Parity]
- Read Time: 1-2ms
- Operating Temperature: -20c ~ 85 degree C
- Endurance:> 100,000 times
- 64-bit data stream [Header+ID+Data+Parity]
- Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc
- Dimension: 43.7×30.5×5.3mm
TEC1-12715
- Model number: TEC1-12715
- Operating Voltage: 12V
- Maximum Voltage- Vmax (V) : 15V
- Maximum Current- Imax (A) : 15A
- Maximum Power : 230 W
- Power Cord: 100mm
- Internal resistance: 1.98 Ohm +/- 10%
- Life expectancy: 200,000 hours
- Failure rate based on long-time testing: 0.2%.
- Easy transition between the hot side to the cool side and vice-versa just by reversing the polarity of the supply.
- Quality tested cooling cells.
- Solid-state, vibration-free, noise-free.
- Simple to install and operate.
- Should use with a heat sink
- Temperature: 138°C
- Wire Insulation Material: Teflon
- Dimension: 40x40x4.0mm
- Weight: 29g

Reviews
There are no reviews yet.