I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-4%
TNY268PN Off-line Switcher IC
₹60.00 inc. GST
TOP247YN Off-line Switcher IC
Original price was: ₹130.00.₹125.00Current price is: ₹125.00. inc. GST
TOP246Y Off-line Switcher IC
Original price was: ₹125.00.₹120.00Current price is: ₹120.00. inc. GST
TOP246Y off-line switcher IC for high-efficiency SMPS and DC-DC power supply designs with integrated protection features.
Description
The TOP246Y Off-line Switcher IC is a high-performance integrated circuit designed for off-line switch-mode power supplies (SMPS) and DC-DC converters. As part of the TOPSwitch family, this IC integrates a high-voltage MOSFET switch, PWM controller, and protection features into a single package, simplifying power supply design while improving efficiency and reliability.
It’s ideal for use in adapter power supplies, battery chargers, LED drivers, industrial power systems, and other embedded electronics that require compact, efficient, and cost-effective power conversion. With built-in protections against over-temperature, over-current, and over-voltage conditions, TOP246Y enables safer and more robust power supply designs.
Key Features :
-
Integrated high-voltage MOSFET and PWM controller
-
Designed for off-line switched-mode power supplies
-
High efficiency and low standby power
-
Over-temperature and over-current protection
-
Compact DIP/SMD package (model dependent)
-
Simplifies SMPS design with reduced external components
Reviews (0)
Shipping & Delivery
Related products
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Reviews
There are no reviews yet.