I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
TOP247YN Off-line Switcher IC
₹130.00 Original price was: ₹130.00.₹125.00Current price is: ₹125.00. inc. GST
- Supply Current: 2.2 mA
- Supply Voltage: 85-265VAC
- Output Voltage: 12 V
- Power: 165W
- Switching Frequency: 132 kHz
- Package: TO-220-7C
Power Integrations’ TOPSwitch-GX series employs the same tried-and-true TOPSwitch structure. This switcher IC is made up of a single CMOS chip that has a high-voltage 700V power MOSFET, PWM control, fault protection, and other control circuitry. This IC has a number of novel capabilities that help to lower system costs while also improving design flexibility, performance, and energy efficiency.
The typical TOPSwitch DRAIN, SOURCE, and CONTROL terminals are extended by 1 or 3 pins, depending on the package type. The typical TOPSwitch DRAIN, SOURCE, and CONTROL terminals are extended by 1 or 3 pins, depending on the package type. As a consequence, features like line detection (OV/UV, line feed-forward/DCMAX reduction), precise externally set current limit, and remote ON/OFF are available. It also features frequency selection (132 kHz/66 kHz) and may be externally synchronised to a lower frequency.
All package options include soft-start, 132 kHz switching frequency (automatically reduced at light load), and frequency jittering for decreased EMI. Larger creepage packages, a wider DCMAX, and hysteretic thermal shutdown are also provided. Furthermore, all necessary parameters such as current limit, frequency, and PWM gain offers better temperature and absolute tolerances, making design easier and reducing system costs.
This IC is a switched-mode power supply device that transforms a control input current to a duty cycle at the open-drain output of a high voltage power MOSFET. During normal IC operation, the duty cycle of power MOSFETs falls linearly with rising CONTROL pin current.
APPLICATIONS:
- A high-efficiency, universal-input device with a 30 W rating.
- Universal Adapter Supply with a High Efficiency, Enclosed, 70 W Power Supply
- 250 W, 250-380 VDC, high efficiency Input Power supply
- 60 W, 185-265 VAC Input Power supply, Multiple Output
- Processor Controlled Supply Turn On/Off

Related products
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
5 Pin RMC Connector
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
AP Extension pigtail SMA female socket jack to UFL IPX Connector
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
Solid State Relay SSR-40DD 40A 3-32V DC to 5-60V DC SSR 40DD Relay Solid State
- Model: SSR-40 DD.
- Control mode: DC-DC
- Input voltage: 3-32V DC.
- Output voltage: 5-60V DC.
- Output current: 40A.
- On voltage: ≤1v.
- One-off time: ≤10ms.
- Off leakage current: ≤2ma.
- Loading current: 40A
- Control current: 3-25mA DC
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Weight: 0. 106Kg.

Reviews
There are no reviews yet.