I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
TOP247YN Off-line Switcher IC
₹130.00 Original price was: ₹130.00.₹125.00Current price is: ₹125.00. inc. GST
- Supply Current: 2.2 mA
- Supply Voltage: 85-265VAC
- Output Voltage: 12 V
- Power: 165W
- Switching Frequency: 132 kHz
- Package: TO-220-7C
Power Integrations’ TOPSwitch-GX series employs the same tried-and-true TOPSwitch structure. This switcher IC is made up of a single CMOS chip that has a high-voltage 700V power MOSFET, PWM control, fault protection, and other control circuitry. This IC has a number of novel capabilities that help to lower system costs while also improving design flexibility, performance, and energy efficiency.
The typical TOPSwitch DRAIN, SOURCE, and CONTROL terminals are extended by 1 or 3 pins, depending on the package type. The typical TOPSwitch DRAIN, SOURCE, and CONTROL terminals are extended by 1 or 3 pins, depending on the package type. As a consequence, features like line detection (OV/UV, line feed-forward/DCMAX reduction), precise externally set current limit, and remote ON/OFF are available. It also features frequency selection (132 kHz/66 kHz) and may be externally synchronised to a lower frequency.
All package options include soft-start, 132 kHz switching frequency (automatically reduced at light load), and frequency jittering for decreased EMI. Larger creepage packages, a wider DCMAX, and hysteretic thermal shutdown are also provided. Furthermore, all necessary parameters such as current limit, frequency, and PWM gain offers better temperature and absolute tolerances, making design easier and reducing system costs.
This IC is a switched-mode power supply device that transforms a control input current to a duty cycle at the open-drain output of a high voltage power MOSFET. During normal IC operation, the duty cycle of power MOSFETs falls linearly with rising CONTROL pin current.
APPLICATIONS:
- A high-efficiency, universal-input device with a 30 W rating.
- Universal Adapter Supply with a High Efficiency, Enclosed, 70 W Power Supply
- 250 W, 250-380 VDC, high efficiency Input Power supply
- 60 W, 185-265 VAC Input Power supply, Multiple Output
- Processor Controlled Supply Turn On/Off

Related products
4 Pin RMC Connector
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
AP Extension pigtail SMA female socket jack to UFL IPX Connector
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board

Reviews
There are no reviews yet.