I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-13%
10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor + Controller
Original price was: ₹9,000.00.₹8,000.00Current price is: ₹8,000.00. inc. GST
24V 36V 48V 72V Scooter E-Bike Electric Throttle Grip Handlebar LED Digital Meter - Orange Color
Original price was: ₹2,500.00.₹2,000.00Current price is: ₹2,000.00. inc. GST
Ramps 1.6 For 3D Printer Parts
Original price was: ₹800.00.₹700.00Current price is: ₹700.00. inc. GST
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
- Design of Pololu plate pin socket can be easily replaced or removed for future design.
- I2C and SPI pins are available for future expansion.
- Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
- LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendel.
- Dimension: 101.5 * 60.5mm
Description
RAMPS 1.6 is optimized and designed based on RAMPS1.4 by Biqu R & D team. RAMPS 1.6 interface board has a more powerful SMT MOSFET driver (up to 218W). The Structure of RAMPS 1.6Â almost the same as Ramps 1.5. The difference is Ramps 1.6 has new 2pin connectors. This is more simple and convenient to connect, also will not be burnt easily. These connectors designed as gold-plated and have a rated current of 3A, which is very compact.
Ramps 1.6 consists of a good Heatsink above the MOS tube in order to give a better function to heat dissipation. They change the original plug-in MOS tube to a patch-type MOS tube in order to solve the problem of plug-in MOS. The RAMPS 1.6 become a control board with powerful upgrade capability and scalable modularity due to its multiple extended interface and replaceable parts functions. It works as a controller board when the pins on the back of the board connected to the Arduino Mega and the front connected to stepper motor drives.
This module can Supports up to 5 motor drivers with the standard A4988 / DRV8825 Pololu interface. Moreover, this Simple and convenient Connection provides larger power than Ramps 1.5/1.4. Thereby offers better Heat Dissipation with a heat sink. RAMPS1.6 features multiple extended interface and replaceable parts. Thus make RAMPS1.6 functions as a control board with powerful upgrade capability and scalable modularity. A 5A additional security and component protection fusion is provided.
Note:
- Please don’t need to insert short-circuit cap under the driver When you plug in the TMC2100 driver,
- Compared to all drivers, TMC2130 is the quietest, no matters whether it is ramps 1.5 or ramps 1.6
Reviews (0)
Shipping & Delivery
Related products
Creality 3D CR-10S DIY 3D Printer Kit 300*300*400mm Printing Size
- Printing size: 300*300*400mm
- Printing type: FDM (Melting touch stack molding technology)
- Body structure: Patent technology V-Slot aluminum bearing
- Nozzle diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Filament diameter: 1.75mm
- Plug: Default EU plug
- Print speed: Max.: 200mm / s, Normal: 80mm / s
- Each accuracy: 0.05-0.4mm (adjustable)
- Power supply: Input 110-220V switchable, output 24V
- Actual power: 160-200W
- Printing accuracy: ±0.1mm
- Environmental requirement: 10-30°C, humidity 20-50%
- Filament materials: PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient Color etc.
- Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
- Format: STL, OBJ, G-Code, JPG
- Printing method: SD card(off-line), contact to the PC(on-line)
- Operating system: Linux, Windows, OSX
- Operating software: CURA, Repetier-Host, simplify 3D
- Machine size: 490*600*615 mm
- Package size: 540*640*310 mm
- Machine net weight: 10.3kg
- Package weight: 14kg
Creality Children CR-100 3D Printer 100*100*80mm Printing Size 1.75mm 0.4mm Nozzle Support
- Brand: CREALITY 3D
- Model: CR-100
- Technology: FDM
- Type: Material extrusion
- Printing Size: 100*100*80mm.
- Machine Size: 241*183*255mm.
- Package Size: 250*230*340mm.
- N.W: 2.8Kg.
- G.W: 3.9Kg.
- Colour : Red
- Printing Method: FDM.
- Number of Nozzle: 1pcs.
- Slice Thickness: 0.1mm-0.4mm.
- Filament Diameter: 1.75mm.
- Working Mode: Online or SD card offline.
- File Format: STL, obj, amf.
- Nozzle Diameter: Standard 0.4mm.
- Plug: Default EU Plug from CN Warehouse.
- Rated Power: 50W.
- Power Supply Input: AC 100-240V /Output: DC 12V.
- Slice Software Cura/Repetier-Host/Simplify 3D.
MACH3 interface board
- Compatible Stepper Motor Driver - Max 5 2-phase Microstep controllers
- Driver type - Pulse and Direction signal control
- Wide input voltage range: 12-24V, and with anti-reverse function.
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Maximum support 5-axis stepper motor driver controllers
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Weight - Approx. 75g
- Dimensions - 90 * 70 * 20mm
NEMA 23 18.9 kg-cm
- Step Angle : 1.8 °
- Holding Torque : 18.9 kg-cm
- Operating Voltage : 3.2 Volts
- Supply Current (A)Â : 2.8 A/Phase
- No. of Leads : 4
- Inductance: 3.6 mH/Phase
- Resistance : 1.13 O/Phase
- Rotor Inertia : 480 gm-cm2
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm)Â : 6.35
- Shaft Length (mm)Â : 20.6
- Cable Length: 30 CM
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine
- Current / Phase: 1.5A
- Step Angle(degrees): 1.8
- Phase: 2
- Type: Hybrid
- Certification: ROHS,CE
- Holding Torque: 4.2 KGCM
- Step angle accuracy: + - 5%(full step, not load)
- Resistance accuracy: + - 10%
- Inductance accuracy: + - 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature: -20deg ~+50deg
- Insulation resistance:100M Min,500VDC
- Insulation Strength: 500VAC for one minute
- (Lead Screw)
- Lead Screw Material: 304 Stainless Steel
- Color: Sliver
- Diameter: 8mm
- Length: 300mm
- Lead of thread: 8mm.
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Stepper Motor Nema 23 kg 7.2 kg Dual shaft
- Rated Voltage: 6.6 V
- Current/ phase: 1A
- Resistance/ phase: 6.6ohms
- Inductance/ phase: 8.2 mH
- Holding Torque: 7.2 kg-cm
- of Leads - 6
- Rotor Inertia - 275
- Weight: 0.65kg
- Detent Torque: 0.36 kg-cm
- Step Angle - 1.8°
- Step Angle Accuracy - ±5% (full step, no load)
- Resistance Accuracy - ±10%
- Inductance Accuracy - ±20%
- Frame Size (mm) - 57x57
- Shaft Length (mm) - 20.6
- Shaft Diameter (mm) - 6.35
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Reviews
There are no reviews yet.