Double speed measuring module encoder photoelectric pulse output module
- Color: Green + black
- Material: FR4
- Working Voltage: 4.5~5.5V
- Launch Tube Pressure drop: V f=1.6V
- Launch Tube Current: I f<20mA
- Signal Output: A, B two lines
- TT Power Level
- Resolution: 0.01mm
- Measurement Frequency: 100 kHz
- D Type Holes Encoder Diameter: 24mm
- Encoder Resolution: 20 lines
- Speed measuring Sensor configuration: measure line 1 motor speed
DP50V5A Constant Voltage current Step-down Programmable Power Supply Module
• Model: DP50V5A.
• Input voltage range: 6V to 55 V.
• Output voltage range: 0.00 to 50 V.
• Output current: 0.000-5.000A.
• Output power range: 00.00-250.0W.
• Open size: 71mm x 39mm.
• Output voltage resolution: 0.01V.
• Output current resolution: 0.001A.
• Output Voltage accuracy: ± (0.5% + 1 digits).
• Output Current accuracy: ± (0.5% + 2 digit).
• Dimension: 79 x 43 x 48mm
• Weight: 78g.
DPM7109 12-Bit µP Compatible ADC IC
- 12-Bit µp - Compatible Analog-To-Digital Converter
- Supply Current Max.: 1500µA
- High Level Output Voltage Min.: 3.5V
- Low level Output Voltage Max.: 0.4V
- High Level Input Voltage Min.: 2.5V
- Low level Input Voltage Max.: 1V
- Analog Input Voltage: +6.2 to -9V
- Power Dissipation: 1.23W
- Input Common-Mode Rejection Ratio: 50µV/V
- Low Noise: 15µVpp
- Package: DIP-40
DPS3003 Constant Voltage Current Step-down Programmable Power Supply Module
- Input voltage range: 6V to 40V
- Output voltage range: 0V to 32V
- Output current: 0 to 3.000A.
- Output power range: 0-96W.
- Open size: 71mm*39mm.
- Output voltage resolution: 0.01V.
- Output current resolution: 0.001A.
- Output Voltage accuracy: ± (0.5% + 1 digits)
- Output Current accuracy: ± (0.5% + 2 digit)
- Dimension: 79*43*41mm
- Weight: about 90g.
Drill Bits Shank Metal Drill Chuck Collet Bits Rotary with Screw, 0.5-3 mm, 3.17 mm, Set of 7
Drill Cutter Blade Set
Drillpro 290mm Drill Bits Accessories Electric Drill Tools
- Material: Plastic + metal.
- Full length: 295mm.
- Flexible shaft dimensions:
- Hex shank: 6.35mm (1/4"").
- Inner hexagon head: 6.35mm (1/4").
- Colour: Black.
- This Flexible shaft can be used for general formula hand drill chuck
- Used for the electric screwdriver.
- Flexible shaft head can be mounted hexagonal shank (1/4 handle) the first batch
- Widely used in computer chassis, electrical cabinets, furniture, electrical appliances and other narrow space screwdriver cannot work in an environment operations.
DRV8825 Stepper Motor
- Operating voltage: 8.2V to 45V
- Continuous current per phase: 1.5 Amp
- Maximum current per phase: 2.2 Amp
- Minimum logic voltage: 2.5V
- Maximum logic voltage: 5.25V
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Compatible with 3V3 and 5V microcontrollers
- Our Board comes with 0.1 Ohm Sensor resistors
- The Correct current decay mode (fast decay or slow decay) selected by chopping control
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Short-to-ground and shorted-load protection
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
DRV8825 STEP DRIVER
DRV8833 2 CHANNEL STEPPER DRIVER
DS1302 Trickle Charge Timekeeping Chip IC
- Trickle Charge Timekeeping Chip
- Supply Voltage range: 2V to 5.5V
- Input Logic 1 Min Voltage: 2 V
- Input Logic 0 Min Voltage: -0.3V
- Output Logic 1 Min Voltage: 2.4V
- Output Logic 0 Max Voltage: 0.4V
- Crystal Capacitance: 6pF
- Clock Frequency: 2MHz
- Active Supply Current: 1.2mA
- Clock Rise and Fall Time:Â 500ns
- Package: DIP-8
