Digital Energy Meter Power Meter 20A
- Working Voltage: 80~260VAC
- Test Voltage: 80~260VAC
- Rated Power: 20A/4500W
- Operating Frequency: 45-65Hz
- Measurement Accuracy: 1.0 grade
- Power Test Range: 0~4.5kW (within 1KW, the display format is 0.0~999.9W; 1KW and above, the display format is 1000~4500W.)
- Energy Test Range: 0~9999kWh (within 10KWh, the display format is 0~9999Wh; 10kWh and above, the display format is 10~9999kWh.)
- Voltage Test Range: 80~260V
- Display Format: 80~260V
- Current Test Range: 0~20A
- Display Format: 0.00~20.00
- Compact design and solid made
- Bright, clear display is very easy to read;
- Very helpful for measuring electrical parameters.
- Weight: 84g(approx.)
Digital Energy Meter Power Meter 100A
- Working voltage: 80 ~ 260VAC
- Test voltage: 80 ~ 260VAC
- Current:100A
- Rated power: 100A/22000W
- Operating frequency: 45-65Hz
- Measurement accuracy: 1.0 grade
- Size: 9*5*2.5cm/3.5*2*1in
- Wire length:19cm/7.5in
- It can display voltage, current, power, power factor, energy, and frequency at the same time.
- Backlight control, short press to turn on/off the backlight.
- The energy can be reset using the key.
Touch Sensor For Mirror
Arduino Pro Mini
Humidity And Temperature Meter With Clock
- Operating Voltage:1.5VDC (1 x AAA battery)
- Temperature Range:-50C ~ +70C (-58f ~ +158f)
- Humidity Range:20%~99%rh
- Accuracy : 1% rh, Temperature : +- 1
- Storage Condition:-100C~120C
- Material - Durable Hard Plastic
- Large LCD display shows big Digital Numbers
- Temperature, Humidity, and Time can be seen simultaneously.
- It has Stand to use as a table-top or a Hook for placing on the wall.
- Integral-hour alarm function
- Time, Date & Month display
- Low Power Consumption
- Adjustment Buttons to select Mode, Setup, and Memory.
433MH RF Module Green
- Wide input supply (2.5 V to 12V)
- Easy to integrate (V+, GND, and Data)
- The device is in deep sleep mode when the Data pin is grounded
- Very small dimension
Receiver Module specification
- Operation voltage: DC5V
- Static Current: 4MA
- Receiver frequency: 433.92MHZ; 315 Mhz
- Sensitivity：－105DB
- Dimension：30*14*9mm
- External Antenna：32CM signal wire, spiral
Transmitter Module Specification
- Operating voltage: 3-12V
- Operating frequency: 433.92MHz; 315Mhz
- Standby current: 0mA
- Operating current :20-28mA
- Transmission distance:> 500m (open to receiving plate sensitivity at-103dBm distance of more than)
- Output Power: 16dBm (40mW)
- Transfer rate: <10Kbps
- Modulation mode: OOK (Amplitude Modulation)
- Operating Temperature: -10 ℃ ~ +70 ℃
- Size: 19 × 19 × 8mm
DC-DC Booster Module 3v-20000v
- Input voltage: DC 3V Input Current: 1.5A
- Output voltage: DC20KV
- Output current: 0.05A
- Input Line Length: approx. 110 mm (red is positive)
- Output cable length: approx. 110mm
- High voltage bipolar discharge distance: 5mm
- type: pulse current
- Structure: and low voltage integrated
- Material: metal
- Color: black and black
- High-Quality Silicone Wires at Input and Output
- Small in Size
- Easy to Use
- Size: 19 x 20 x 18 mm
Thermostat Sensor 200D
Thermostat Sensor 180D
KX931 Travel Plug
Cordless Screwdriver Machine KX80
- Torque: 22nm
- Input Power: 800W
- No Load Speed: 0-3000 rpm
- Drilling Capacity (in Steel):13mm
- Good Combination of Performance, Comfort, Value & Style.
- Easy to Find in your Toolbox or Project Drawer.
- Great for Assembly Projects, Installing Mini Blinds, Hanging Curtain Rods & Pictures, Installing Light Switches.
- Compact Pivot Design Allowing you to Get in Tight Spaces.
- Forward/Reverse Button Allows you to Change Directions so you can Remove Screws as Well as Put them in.
- Large 2 Finger Triggerfeature
- The over-molded rubber grip makes it comfortable to hold and keeps it from slipping.