MEGA Sensor Shield V2.0
- PIN13 Stat & Power LED indicator
- Digital IO Ports D0-D53
- Analog IO Ports A0-A15
- Reset Button up to the top
- External Power In
- SD Card Interface
- Ultrasonic Interface
- ISP Interface
- Bluetooth Interface
- APC220 Interface
- PCB finest Immersion Gold processing
- Plug it easier to set up a variety of commonly used module interface
Sensor Shield V5 Expansion Board For Arduino
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 Wireless RF modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
Arduino Duemilanove Development Board with USB Cable
- Microcontroller: ATmega168/ATmega 328
- Operating Voltage: 5V
- Input Voltage: 7-12V
- Input Voltage: 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by the bootloader
- SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
- EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
- Clock Speed: 16 MHz
Arduino Leonardo R3
- Board Mode: LEONARDO R3
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB
- SRAM: 2.5 KB (ATmega32u4)
- EEPROM: 1 KB (ATmega32u4)
- Clock Speed: 16 MHz
Robot Wheel for BO Motor – 62x25mm – Yellowa
Robot Wheel – 100 x 2mm – 6mm Shaft Black
Robot Wheel for Track Belt – 6mm Shaft 100 x 2mm Black
Robot Wheel 10cm Dia. x 2cm Width
Robot Wheel 10cm Dia. x 4.4cm Width
NUCLEO-64 STM32G071RBT6 Development Board Arduino & ST Morpho Connectivity
- STM32 microcontroller in LQFP64 package
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 768 kHz crystal oscillator
- Board connectors: ARDUINO Uno V3 expansion connectors morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK, USB VBUS, or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
- Board-specific features
- External SMPS to generate Vcore logic supply
- 24 MHz HSE
- Board connectors: External SMPS experimentation dedicated connector Micro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
- Arm® Mbed Enabled™ compliant
CYS-S8218 40 kg High Torque Digital Servo
- Control System: Pulse Width Control 1500usec Neutral
- High precision metal gear
- Suit for 1/5 RC car
- Material: aluminum alloy
- Operating Voltage: 6.0~7.4Volts
- Operating Temperature Range: (-)10 to +50 degree C
- Operating Speed (6.0V): 0.20sec/60° at no load
- Operating Speed (7.4V): 0.18sec/60° at no load
- Stall Torque (6.0V): 36kg.cm
- Stall Torque (7.4V): 38kg.cm
- Operating Temperature Range: (-)10 to +50 degree C
- Dead Band Width: 4usec
- Motor Type: NdFeB motor
- Bearing Type: Dual Ball Bearing
- Connector wire: about 300mm
- Size: 59.5*29*55.2mm
- Weight: 164g
Metal Gear Servo Motor GS-5515MG
- Control System: Positive PWM control (1500 usec neutral)
- Operation Voltage Range: 4.8V - 0V
- Operation Temperature Range: -20 C - +60 degree C
- Test Voltage:
- Standing Torque@ 4.8V: 13kg-cm
- Speed@ 4.8V : 0.31 sec / 60 at no load
- Idle Current@ 4.8V: 250mA at stopped
- Running Current@ 4.8V: 2000mA at no load
- Standing Torque@ 6.0V: 15kg-cm
- Speed@ 6.0V: 0.28 sec / 60 at no load
- Idle Current@ 6.0V: 300mA at stopped
- Running Current@ 6.0V: 2200mA at no load
- Dead Band Width: 8 usec
- Circle: 10000 times
- Direction: Re-clock wise/ pulse travel 1500 to 1900 usec
- Drive type: FET drive
- Motor Type: Carbon brush
- Size: 41.2*20.2*37.7 mm
- Weight: 63g without splined horn
- Ball Bearing: Double ball bearing
- Gear Material: Metal gear
- Case Material: Nylon plus fiber
- Connector Wire Length: 300mm
- Connector Wire Gauge: 22AWG heavy duty (Futaba universal)