E-Bike MY1020Z 600W 36V Gear Motor For E-bike Bicycle
- Model: MY 1020Z2. 600W
- Operating Power: 600 W
- Operating Voltage: 36 V
- Rated Current: No Load: 2.5 A Full Load: 40 A
- Rated Speed: Base Motor with No load RPM:3200
- Rated Speed(After Reduction): 480 RPM
- Rated Torque: 1.80 N.m.
- Gearbox: Yes
- Sprocket: 10 tooth #40 chain
- Mounting Bracket: 4-5/8" X 2-3/4"
- Length of Cable: 0.5 Meter
- Weight: 5.438Kg
- Efficiency: ≥78%.
- Application: Small and Medium-size E-Tricycle
- Gear Ratio: 6.67:1
25H Chain for Ebike Scooter 1/2″ x 1/8 ” x 38 Links
- #25 or #25H Chain
- Length: 2.3 Feet (Full Length: 4.6 Feet)
- Link: 1/2" x 1/8 " x 114 Links
- High-quality product
- Wide variety of Applications
- Improves efficiency and extends the range of Electric Bikes
- Ensures efficient transfer of Power and prolongs Battery Life
- Compatible with MY1016Z2 250W Geared Motor and MY1016Z3 350W Geared Motor
250W ELECTRIC WHEELCHAIR POWERTRAIN PMDC MOTOR – SCD2-A
- Operating Voltage: 24VDC
- Output Power: 250W
- No-load Current: 3.6A
- Motor Speed ±5% : 2650 RPM
- No-load Output Speed: 150RPM
- Gear Ratio: 19 : 1
- Sound Level: 60 dB(A)
- Brake Torque: 33.4 Nm
- Gear Motor Rated Torque: 16.95 Nm
- Output Shaft OD: 17mm (with 6mm keyway and key)
- Dimensions (1) : 313mm
- Dimensions (2) : 82mm
- Motor OD: 79mm
- Weight: 15.5lbs per motor
- Efficiency : 80%
Non Unite 350W MY1016Z3 24V GearedMotor
- Model: Non UNITEMOTOR MY1016Z3
- Name: 24V/36V DC Brushed Motor
- Rated Voltage: 24V DC / 36V DC
- Power 350W
- Rated Speed: 24VDC: 3000RPM. 36VDC: 3200RPM.
- No load speed : 3850RPM
- Gear Ratio: 1:9.78
- Rated Torque: 1.11N.m
- Sprocket: 9mm Pitch,
- Pitch: 12.7mm.
- Gear Ratio: 1:9.78
- Installation type: Motor With Foot Stand.
- Easy Install.
- Suit Controller: 24/36v 350w brush controller
- Usage: Electric Bike ,E-tricycle, Electric chairwheel,E-Scooter,E-Motocycle,DIY
MY1016 250W 24V DC Motor for E-Bike
ELECTRIC WHEELCHAIR POWERTRAIN PMDC MOTOR – SCD2-B 200W
- Operating Voltage: 24VDC
- Output Power: 200W
- No-load Current: 3.6A
- Motor Speed ±5% : 4400 RPM
- No-load Output Speed: 135RPM
- Gear Ratio: 32 : 1
- Sound Level: 60 dB(A)
- Brake Torque: 33.4 Nm
- Gear Motor Rated Torque: 16.95 Nm
- Output Shaft OD: 17mm (with 6mm keyway and key)
- Dimensions (1) : 325mm
- Dimensions (2) : 82mm
- Motor OD: 79mm
- Weight: 15.5lbs per motor
- Efficiency : 80%
200W Electric Wheelchair Powertrain PMDC Motor – SCD1
- Operating Voltage: 24VDC
- Output Power: 200W
- No-load Current: 3.6A
- Motor Speed ±5% : 3250 RPM
- No-load Output Speed: 190RPM
- Gear Ratio: 19 : 1
- Sound Level: 70 dB(A)
- Brake Torque: 33.4 Nm
- Gear Motor Rated Torque: 16.95 Nm
- Output Shaft OD: 17mm (with 6mm keyway and key)
- Weight: 15.5lbs per motor
- Efficiency : 80%
MY6812 100W 12V DC Motor for E-Bike Bicycle
Chain for 6.35mm pitch sproket – Ebike Scooter
- #25 or #25H Chain
- Length: 17.8 inch (Full Length: 35.6 inch)
- Pitch: for 6.35mm Pitch Sprockets
- Link: 141 Links
- High-quality product
- Wide variety of Applications
- Improves efficiency and extends the range of Electric Bikes
- Ensures efficient transfer of Power and prolongs Battery Life
- Note - These chains are compatible with MY1016 250W Non Geared Motor and MY1016 350W Non Geared Motor
Attiny 85
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- 8K Bytes of In-System Programmable Program Memory Flash
- Endurance: 10,000 Write/Erase Cycles
- 512 Bytes In-System Programmable EEPROM
- Endurance: 100,000 Write/Erase Cycles
- 512 Bytes Internal SRAM
- Peripheral Features
- High-Frequency PWM Outputs with Separate Output Compare Registers
- USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
- 10-bit ADC
- Single-Ended Channels
- 2 Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
- Speed Grade: 0 – 10 MHz @ 2.7 – 5.5V, 0 – 20 MHz @ 4.5 – 5.5V
- Low Power Consumption
- Active Mode:1 MHz, 1.8V: 300 µA
Attiny 5 Version 1
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- 8K Bytes of In-System Programmable Program Memory Flash
- Endurance: 10,000 Write/Erase Cycles
- 512 Bytes In-System Programmable EEPROM
- Endurance: 100,000 Write/Erase Cycles
- 512 Bytes Internal SRAM
- Peripheral Features
- High-Frequency PWM Outputs with Separate Output Compare Registers
- USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
- 10-bit ADC
- Single-Ended Channels
- 2 Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
- Speed Grade: 0 – 10 MHz @ 2.7 – 5.5V, 0 – 20 MHz @ 4.5 – 5.5V
- Low Power Consumption
- Active Mode:1 MHz, 1.8V: 300 µA
