Heating Element
Sibass SE- FS14 Foot Switch
Thermal Overload Relay LR2 D13
Product Description
The LR2-D13 thermal overload relay is primarily used for protecting electric motors from overload and phase failure in industrial applications. It's designed to monitor the current flowing through the motor and trip the circuit if the current exceeds a pre-set limit, preventing the motor from overheating and potentially damaging itself or other connected equipment.Â
Limit Switch Adjustable Roller Type
Mechanical Timer
HEAVY DUTY SUNBIM ENERGY REGULATOR
Arduino Mega Pro Mini CH340 Development Board
- Microcontroller ATmega2560
- USB-TTL converter: CH340
- Power Out:5V-800mA
- Power IN.: 5V
- Power IN. VIN/DC Jack:5V
- Power Consumption: 5V 220mA
- Logic Level: 5V
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type : ISP
- Operating temperature −40С°/+85С°
- Length x Width :38mm×54mm
TDA7492 50W*2 100W High Power Digital Amplifier Board
• Class D amplifier produces 2 x 50 watt @ 8 ohms
• Can be wired R+ to L+ for mono mode
• 8″ stereo wiring harness included
• Short-circuit and over-temperature protection
• Supply Voltage 10-26 V DC.
• Standby and mute features
• Short-circuit protection
• Thermal overload protection
• Externally synchronizable
10000W Original Chips Thyristor Super Power Electronic Regulator can Change Light Speed and Temperature
- Operating Voltage: AC 220 VDC
- Maximum Power: 10000W
- Voltage Range: AC 0-220V (adjust temperature or light)
- Controller Size: 95.7*56.7*53.8mm
- Panel Size: 74.6*59.8*2.3mm
- Cable Length: 287mm
- New two-way high-power SCR, max current up to 80A.
- Voltage regulator with the peak voltage absorption circuit effectively protects the high-power SCR and has a longer service life.
- Built-in heat sink, thickened to increase the heat sink, good heat dissipation, easy to install.
- 57A high current terminal block, simple wiring, strong button adjustment stability.
- Omron original tact switch, Fairchild original photoelectric coupler, all metal film resistors are stable and durable.
- The value is automatically saved. After power-on, it will automatically start to the last adjusted value.
- Weight: 200gm
1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A For Car Laptop Solar Battery
- Input voltage :10-60V
- Output voltage: 12-83V (adjustable)
- Output Current: 12A
- Input Current: 20A
- Constant current range: 0.3 - 20A
- Output power: = input voltage x 10A
- Working temperature: -40~+85 degrees
- Working frequency: 150KHz
- Conversion efficiency: ≤95%
- Connection mode: welding output (please use big current and pure copper wire)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- Overcurrent protection: there is a certain range of error in the input over 30A, automatically reducing the output voltage.
- Short circuit protection: there is (input 40A fuse) double short circuit protection, use more secure.
- Has big heat sink to dissipate heat properly but can add an external fan to the module.
- Dimension (mm): 130 x 52 x 46
MH1210W 72V 250V 10A Digital Temperature Controller
- Working voltage: DC 9-72V/AC90-250V ± 10%, 50/60 HZ
- Rated current: 10 A
- Power consumption: ≤3 W
- Measurement range: -50~110 °C
- Measurement precision: 0.1 °C
- Measurement error: ±0.3 °C
- A mini temperature controller.
- Large and clear LED display for better readability
- Wide temperature measuring range
- Heating and cooling control
- Temperature calibration
- Delay protection function
- All parameters reset to default settings after short circuit