General Purpose PCB 6×4
2N6288 NPN Transistor 40V 7A
89C55 Atmel Microcontroller IC
- Core Processor: 8051
- Data Bus Width: 8 bit
- Maximum Clock Frequency: 33 MHz
- Program Memory Size: 20 KB
- Program Memory Type: Flash
- RAM Size: 256 B
- ADC: No
- Number of Programmable I/Os: 32
- Number of Timers: 3x16 bit
- Supply Voltage Range: 4 V to 5.5 V
- Package: PDIP-40
- Compatible with MCS-51™ Products
- 20K Bytes of In-System Reprogrammable Flash Memory – Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-Level Program Memory Lock
- 256 x 8-bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Low Power Idle and Power Down Modes
IRF3710 N-Channel Power Mosfet Transistor 100V 57A
7824 24V Positive Voltage Regulator IC
12 MHz 2 Pin Oscillator Crystal
74HC74 Dual D-Type Flip-Flop with Set and Reset; Positive Edge-Trigger
- Dual D-type flip-flop with set and reset; positive edge-trigger
- Number of Circuits: 2
- Logic Family: 74HC
- Input Type: Single-Ended
- Output Type: Differential
- Propagation: Delay Time: 44 ns
- Output Current: 5.2mA
- No. of Pins: 14
- Operating Temperature Range: -40°C to +85°C
- Supply Voltage Range: 2V to 6V
- Package: DIP14
10nf 100V DC Green Polyester Capacitor
- Capacitance: 10nf
- Voltage Rating DC: 100 V
- Color: Green
- Tolerance: +/-5%
- Mounting: THT
- Leakage Current: 3 uA
- Body Dimensions:10*5*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 5mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance.
LDR SENSOR 20mm
470nf 400V DC Polyester Capacitor
- Capacitance:470nf
- Voltage Rating DC: 400 V
- Tolerance: +/-5%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Pitch: 15mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance
