Raspberry Pi 5 Model 8GB
- Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches, and a 2MB shared L3 cache
- VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
- Dual 4Kp60 HDMI display output with HDR support
- 4Kp60 HEVC decoder
- LPDDR4X-4267 SDRAM
- Dual-band 802.11ac Wi-Fi
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- microSD card slot, with support for high-speed SDR104 mode
- 2x USB 3.0 ports, supporting simultaneous 5Gbps operation
- 2x USB 2.0 ports
- Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)
- 2× 4-lane MIPI camera/display transceivers
- PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)
- 5V/5A DC power via USB-C, with Power Delivery support
- Real-time clock (RTC), powered by an external battery
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
ULink2 ARM Emulator Programmer firmware Support MDK5.0 Cortex-M4 SWD
58mm Thermal Printer (Black)
- Heavy-duty 58mm direct thermal printer
- Inbuilt Adapter
- High speed printing of 90mm / Sec
- Free Drivers, USB, Adapter and Paper Roll
- Interface: usb + cash drawer support.
- Works with windows 7 / 8 /10
- High speed printing
- Long life thermal head.
- Perfect print quality
- Low cost,Low noise, fast speed print.
- Support cashbox drive.
- Compact and lightweight,beautiful design.
- Â Built in data bumper (data received when printing).
- Interface type parallel port or serial port.
- Support to enlarge characters and adjust characters spacing for printing.
- Compatible with esc/order pos.
- Operation temperature0~50 Degree C
- Relative humidity10~80%
- Item size 12.8 * 18 * 10.8cm
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Â Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
Text to Speech TTL Module (Serial to Speech)
-  Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Â Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
 Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
 Voice effect optimization
-
 Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Peak Green PLA 1.75mm 1 KG Filament-Wanhao
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Peacock Blue PLA 1.75 mm 1 KG Filament-Wanhao
xcluma Xilinx Xc2C32A Cpld Development Learning Board
Raspberry Pi Pico W,WiFi Support 2.4/5 GHZ ,RP2040 Dual-core Processor,Dual-core Arm Cortex M0+ Processor
- Raspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication.
- 26 x multi-function GPIO pins: configurable pin function, allows flexible development and integration
- Built-in Wi-Fi: Onboard Infineon CYW43439 wireless chip, supports 2.4/5 GHZ Wi-Fi 4
- Dual-core Arm processor: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- C/C++, MicroPython support: Comprehensive SDK, dev resources, tutorials to help you easily get started
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
- Peripherals
- 2 UARTs
- 2 SPI controllers
- 2 I2C controllers
- 16 PWM channels
- USB 1.1 controller and PHY, with host and device support
- 8 PIO state machines
J-link Emulator V8 all-ARM JTAG Adapter Converter for TQ2440 MINI2440 K98
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Arduino CNC Shield
- Shield type:Â Arduino Nano
- Firmware:Â GRBL
- Modular stepper motor drivers:Â 3
- Limit switches:Â 6
- Micro-stepping:Â 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
3″ Magnet Sheilded Woofer
CS DC Geared Motor 10 RPM
Potentiometer Sensor Module
IRIS4011 Integrated Switcher IC
- Integrated Switcher
- Peak Drain Current: 6.8A
- Maximum Switching Current: 2.7A
- Power Dissipation for Mosfet: 89W
- Power Dissipation for Control Part: 0.8W
- Maximum OFF Time(for Control IC): 60µs
- Minimum OFF Time(for Control IC): 1.5µs
- Drain Source Voltage(for Mosfet): 650V
- ON-Resistance(for Mosfet): 3.9Ω
- Package: 5-Lead TO-220
Thermostat Sensor 200D
Thermostat Sensor 100D
Thermostat Sensor 90D
85T03GP N-Channel Power Mosfet Transistor 30V – 75A / SMD – TO-263
Vibration Motor
- Speed(RPM):19000
- Motor diameter: 6mm
- Shaft diameter: 0.8mm
- Shaft length: 4mm
- Rated voltage: 1.5V-4.5V
- Small Compact Size
- Metal Body
- Power:Â [email protected]
- Powerful Motor
74LS73 Dual Positive Pulse Triggered J-K Flip-Flop IC
IRF1010E N-Channel Power Mosfet Transistor 60V 81A
- Type Designator: IRF1010E
- Type of Transistor: MOSFET
- Type of Control Channel: N -Channel
- Maximum Power Dissipation (Pd): 170 W
- Maximum Drain-Source Voltage |Vds|: 60 V
- Maximum Gate-Source Voltage |Vgs|: 10 V
- Maximum Drain Current |Id|: 81 A
- Junction Temperature (Tj): 150 °C
- Total Gate Charge (Qg): 130 nC
- Maximum Drain-Source On-State Resistance (Rds): 0.012 Ohm
- Power Dissipation: 170W
- Package: TO-220AB
2K2pf 2KV High Voltage Disc Capacitor (10 pcs)
3.3nf 2000V DC Box Capacitor
- Capacitance: 3.3nf
- Voltage Rating: 2000V
- Dielectric Type: Double Metallized PP
- Capacitance Tolerance: ± 10%
- Capacitor Case Style: Radial Box
- Capacitor Terminals: Radial Leaded
- Operating Temperature Min: -55°C
- Operating Temperature Max: 105°C
- Automotive Qualification Standard
- High Accuracy, Long-Life Polyester Film Capacitor
- Low Leakage
- Easy Mounting