Showing all 9 results

5V-30V Delay Relay Timer Module Trigger Delay Switch Micro USB Power Adjustable Relay Module

  • Time can be adjusted by potentiometers
  • With MicroUSB 5.0V power input, it is very convenient to use.
  • 5V --30V ultra-wide supply voltage.
  • External triggering and on-board buttons are two trigger modes.
  • With relay suction indicator.
  • The anti-interference ability is strong, and the relay will not misbehave under all kinds of disturbances, so it is suitable for industrial control.
  • Module can be controlled: 10A 250VAC (AC), 10A 30VDC (DC) below load.
  • With Relay follow current protection.
  • • Size: 5.4 * 1.9 * 1.8cm

NVIDIA Jetson Nano 2GB Developer Kit

  • The NVIDIA 2GB jetson nano developer kit is the latest addition of the development board to the jetson family. 
  • It has a 2GB memory and 64bit LPDDR4 and runs at a speed of 25.6 GB/s.
  • The NVIDIA jetson nano developer kit integrated with a 128-core NVIDIA Maxwell and Quad-core ARM A57.
  •  This development board was created to be the ideal basis for learning, building and educating the different possibities of AI. 
  • The NVIDIA jetson nano kit is perfect for learning and developing AI and robotics.

NUCLEO-F446RE with MCU STM32F446RET6 Supports STM32 Nucleo mbed Development Board

Intel GALILEO Single ATX DDR2 1066 Microcontroller Motherboard GALILEO1.Y

STM32F103C8T6 ARM board

500.00 inc. GST
  • 100% Brand new and high-quality STM32 Board
  • Model: STM32F103C8T6.
  • Core: ARM 32 Cortex-M3 CPU.
  • Debug mode: SWD.
  • 72MHz work frequency.
  • 64K flash memory, 20K SRAM.
  • 0-3.6V power, I/O.
  • Reset(POR/PDR).
  • 4-16MHz crystal.
  • Onboard Mini USB interface, you can give the board power supply and USB communication.

Msp-Exp430G2 Msp430 Launchpad

1,500.00 inc. GST
• 14-/20-pin DIP (N) Socket • 20 pin Launchpad standard leveraging the Booster Pack ecosystem • On-Board EZ-FET emulator featuring Energy Trace™ technology • USB debugging and programming interface featuring a driverless installation and application UART • serial communication with up to 9600 Baud • Supports MSP430G2xx2, MSP430G2xx3, and MSP430F20xx devices in PDIP14 or PDIP20 packages • Two general-purpose digital I/O pins connected to green and red LEDs for visual feedback • Two push button for user feedback and device reset • Easily accessible device pins for debugging purposes or as socket for adding customized extension boards

NUCLEO-64 STM32G071RBT6 Development Board Arduino & ST Morpho Connectivity

2,500.00 inc. GST
  • STM32 microcontroller in LQFP64 package
  • 1 user LED shared with ARDUINO®
  • 1 user and 1 reset push-buttons
  • 768 kHz crystal oscillator
  • Board connectors: ARDUINO Uno V3 expansion connectors morpho extension pin headers for full access to all STM32 I/Os
  • Flexible power-supply options: ST-LINK, USB VBUS, or external sources
  • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
  • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
  • Board-specific features
  • External SMPS to generate Vcore logic supply
  • 24 MHz HSE
  • Board connectors: External SMPS experimentation dedicated connector Micro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
  • Arm® Mbed Enabled™ compliant

STM32 Nucleo-64 development board with STM32F103RB MCU, supports Arduino and ST morpho connectivity

2,500.00 inc. GST
  • STM32 microcontroller with LQFP64 package
  • Two types of extension resources
-Arduino Uno Revision 3 connectivity -  STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
  • mbed-enabled (mbed.org)
  • On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- selection-mode switch to use the kit as a standalone ST-LINK/V2-1
  • Flexible board power supply
- USB VBUS or external source(3.3 V, 5 V, 7 - 12 V) - Power management access point
  • Three LEDs
- USB communication (LD1), user LED (LD2), power LED (LD3)
  • Two push buttons: USER and RESET
  • USB re-enumeration capability: three different interfaces supported on USB
- Virtual Com port - Mass storage -  Debug port
  • Comprehensive free software HAL library including a variety of software examples
  • Supported by wide choice of Integrated Development Environments (IDEs) including IAR, Keil, GCC-based IDEs
 

XNUCLEO-F103RB, Improved STM32 NUCLEO Board

4,500.00 inc. GST
  • Core: ARM® 32-bit Cortex™-M3
  • Operating frequency: 72MHz
  • Operating voltage: 2.0V-3.6V
  • Package: LQFP64
  • Memories : 128kB Flash, 20kB SRAM
  • Interfaces : 2 x SPI, 3 x USART, 2 x I2C, 1 x CAN, 1 x USB
  • AD/DA : 2 x AD (12 bit, 16 channels)
  • Compatible with NUCLEO-F103RB, onboard Cortex-M3 microcontroller STM32F103RBT6
  • Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources
  • ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion
  • Supports mbed, build a prototype quickly by mbed SDK and online tools
  • Comprehensive free software HAL library including a variety of software examples
  • Comes with a separated ST-LINK/V2 module