455 KHz 2 Pin Crystal Oscillator
TOP243PN Off-line Switcher IC
- Supply Current: 1.6 mA
- Supply voltage range: 85-265VAC
- Power: 25W
- Output Voltage: 12 V
- Switching Frequency: 132 kHz
- Package: TO-DIP-8
- Extended power range for higher power applications
- Â No heatsink required up to 34 W using P/G packages.
- Â Features eliminate or reduce cost of external components.
- Fully integrated soft-start for minimum stress/overshoot.
- Â Externally programmable accurate current limit.
- Â Wider duty cycle for more power, smaller input capacitor .
- Separate line sense and current limit pins on Y/R/F packages
TOP223Y Offline PWM Switcher IC
- Supply Current: 1.2 mA
- Supply Voltage: 85-265VAC
- Output Voltage: 5.7 V
- Power (Watts): 50W
- Switching Frequency: 100 kHz
- Lowest cost, lowest component count switcher solution
- Cost competitive with linears above 5 W
-  Very low AC/DC losses – up to 90% efficiency
- Â Built-in Auto-restart and Current limiting
- Â Latching Thermal shutdown for system level protection
- Implements Flyback, Forward, Boost or Buck topology
- Â Works with primary or opto feedback
- Â Stable in discontinuous or continuous conduction mode
- Â Source connected tab for low EMI
- Â Circuit simplicity and Design Tools reduce time to market
- Package: TO-220
CD4089BE CMOS Binary Rate Multiplier IC
TOP243YN Off-line Switcher IC
CD4038BE CMOS Triple Serial Adder IC
IR2153 Self-Oscillating Half-Bridge Driver IC
- Self-Oscillating Half-Bridge Driver
- High Side Floating Supply Voltage Max.: 625V
- Supply current Max.: 5mA
- Clamp Voltage Max.: 16.8V
- High level output voltage Max.: 100mV
- Low level output voltage Max.: 100mV
- Total Power Dissipation: 1W
- Oscillator frequency Max.: 106kHz
- Rise Time Max. : 150ns
- Fall Time Max.: 100ns
- Integrated 600V half-bridge gate driver
- 15.6V zener clamp on Vcc • True micropower start up
- Tighter initial deadtime control
- Low temperature coefficient deadtime
- Shutdown feature (1/6th Vcc) on CT pin
- Increased undervoltage lockout Hysteresis (1V)
- Lower power level-shifting circuit
- Constant LO, HO pulse widths at startup
- Lower di/dt gate driver for better noise immunity
- Low side output in phase with RT
- Internal 50nsec (typ.) bootstrap diode (IR2153D)
- Excellent latch immunity on all inputs and outputs
- ESD protection on all leads
- Also available LEAD-FREE
- Package: DIP-8
5Q1265 Power Switch IC
- Power Switch
- Drain Voltage: 650V
- Drain Current: 28A
- Supply Voltage: 40V
- Supply Current: 18mA
- Precision fixed operating frequency (100/67/50kHz)
- Low start-up current (typ. 100µA)
- Pulse by pulse current limiting
- Over-current protection
- Overvoltage protection (Min. 25V)
- Internal thermal shutdown function
- Under voltage lockout
- Internal high voltage sense FET
- Auto-restart mode
4.4333619 MHz 2 Pin Crystal Oscillator
- Crystal Case Type : Metal Can
- Crystal Mounting Type : Through Hole
- Frequency : 4.4333619MHZ
- Frequency Stability : ± 20ppm
- Frequency Tolerance : ± 20ppm
- Load Capacitance : 20 pF
- No. of Pins : 2
- Operating Temperature Max : 70 °C
- Operating Temperature Min : -10 °C
- Operating Temperature Range : -10°C to +70°C
- Effective Series Resistance : 30 ohm
DLO165 Power Switch IC
- Power Switch
- Supply Voltage Max.: 20V
- Total Power Dissipation: 1.25W
- Drain-Source Voltage: 650V
- On-State Resistance Max.: 10Ω
- Rise Time : 4ns
- Rise Time: 10ns
- Output Frequency Max.: 55KHz
- Duty Cycle Max.: 83%
- Operating Current Max.: 5mA
- Over Voltage Protection Min.: 18V
- Precision fixed operating frequency (100/67/50kHz)
- Low start-up current (typ. 100µA)
- Pulse by pulse current limiting
- Over-current protection
- Overvoltage protection (Min. 25V)
- Internal thermal shutdown function
- Under voltage lockout
- Internal high voltage sense FET
- Auto-restart mode
L298N Dual Full-Bridge Driver IC
- Dual full-bridge driver
- Operating Supply Voltage up to 46V
- Total DC Current up to 4A
- Low Saturation Voltage
- Over Temperature Protection
- Logical "0" Input Voltage up to 1.5V (High Noise Immunity)
- Power Supply:Â 50V
- Logic Supply Voltage:Â 7V
- Input and Enable Voltage:Â -0.3 to 7V
- Non Repetitive Peak Output Current:Â 3A
- Total Power Dissipation: 25w
