Showing 1–12 of 20 results

HLK-SW16 16 CHANNEL WIFI CONTROLLED RELAY BOARD

₹5,050.00 inc. GST
  • Supply voltage: DC 5V
  • Current supply: 2 ampere
  • Wi-Fi module: HLK-RM04
  • 16 channel device
  • Antenna: 2.4G flexible antenna
  • Low power Wi-Fi module
  • Support 802.11b/g/n protocol
  • Support AP/STA
  • Support TCP server/ TCP client/ UDP server/ UDP client work mode
  • Doesn’t need any driver, use as the normal serial port of PC
  • Support wireless security WEP/WPA-PSK/ WPA2-PSK/TKIP/AES
  • Dimension: 115*130*19mm
 

Electricity Failure Alarm

₹1,500.00 inc. GST
  • Conversion time : 0.5 seconds
  • Monitoring voltage : AC150V-400V /50 to 60Hz
  • Alarm volume :110-120 dB
  • Usage: Alarm connected to AC 220V (or AC 380V) power supply, turn the power switch to enter the working state

ESP8266-12E 10A 220V NETWORK RELAY WIFI MODULE INPUT DC 7V-30V

₹1,500.00 inc. GST
  • Input voltage: DC 7V-30V
  • Relay voltage: 220V
  • Relay current: 10A
  • ISM: 2.4GHz
  • PA: +25dBm
  • Input over-voltage protection
  • Input overcurrent protection
  • ESP8266 WIFI module with 4 layered board design
  • LED indicator for input status and output status
  • 220V 10A relay, normally opened, and one normally closed
  • Optocoupler isolation input, TVS input protection
  • Access server control via HTTP protocol by TCP client mode, high current terminals
  • Dimension: 65*40*18mm

PIR SENSOR ROUND

₹800.00 inc. GST
  • Suitable for ceiling mounting with detection angle of  360° and distance of 6m
  • Work in low light
  • Shutdown time delay and Ambient light settings can be adjusted
  • Time Delay: 10sec to 7mins
  • Light Control: 3-2000LUX
  • Power Source:220-240 V/AC
  • Rated load: 1200W

SWIVEL INFRARED MOTION SENSOR OCCUPANCY SWITCH

₹750.00
  • Power frequency: 50~60Hz
  • Control light: <3 LUX ~ 2000 Lux (Adjustable)
  • Time-Delay: Minimum:8sec±3sec to a Maximum:7min±2min
  • Power source: 100V/AC-130V/AC <=> 220V/AC-240V/AC
  • 1200W(220V/AC-240V/AC) - 800W(100V/AC-130V/AC)
  • Power consumption:0.45W(static 0.1W)
  • Detection range: 180°
  • Detection distance: 12 meters maximum at less than 24°C
  • Working temperature:-20 to 40°C
  • Working humidity: Less than 93% Relative Humidity
  • Suggested Installation height: 0.5 meter to 3.5 meters
  • Detection motion speed: 0.6 to 1.5 meters per second
  • Identify day and night automatically -
  • Power and detection indication
  • Time-delay added continually
  • Time-delay adjustment according to the customer desire. The minimum time is 8sec±3sec and the maximum is 7min±2min.
  • Locking function: the sensor will keep load lighting when power is shut off for 2 seconds and then on. When power is shut off for 4 seconds and then on, sensor will resume automation.

ESP8266- 01 5V WIFI RELAY MODULE TOI APP CONTROLLED FOR SMART HOME AUTOMATION

₹699.00 inc. GST
  • Onboad module: ESP2866 WIFI module
  • Onboard relay: 5v.10a/250v ac, 10a/30v dc
  • Can connect 5 clients at the same time on AP mode
  • The module has two work modes: Cell phone, carry on Wi-Fi module and Cell phone and Wi-Fi module carry on the same router
  • Used in mobile phone, Wi-Fi module equipped with one router and control relay by APP
  • Maximum transmission distance of 400 m when cell phone carry on wifi module directly, in the open environment
  • Transmission distance depends on routers signal intensity when wifi and cell phone is carrying on the same router
  • IN+, IN_: 5V power input
  • TX, RX, and GND: serial port debug pins
  • Baud rate: 115200
  • Provide diode effusion protection
  • Short response time
  • Dimension: 45*28mm
         

E27 PIR Infrared Motion Sensor LED Light Lamp Holder Control Switch

₹650.00 inc. GST
  • Material: plastic and metal.
  • Voltage: AC 170-250V, 50/60Hz.
  • Load power: 3-80W
  • Sensing range: 5-8M 110°
  • Sensitivity: 5LUX
  • Delay time: 15~300 seconds
  • Power consumption idling: ≤0.1W
  • Load characteristic: energy saving lamp, LED