Showing 1–12 of 79 results

0.5mm 3D Printer Extruder Brass Nozzle

  • Filament Support: 1.75mm
  • Material: High-quality brass
  • Colour: Brass colour
  • Nozzle Accuracy: 0.5mm
  • Screw outer diameter: M6

1 meter 7 x 7 mm Cable drag Chain Wire Carrier With End Fits

₹110.00 inc. GST
  • 7 x 7 mm Cable drag Chain With End Fits
  • Radius: 15mm
  • Miniature series 7-non opening type
  • HI:7mm BI:7mm H:10mm BA:13mm
  • Pitch=16.7mm Link Per Meter=58
  • Max outer diameter of cable:5mm
  • 1-meter length
  • Long operating life
  • Good toughness
  • High performance

1.75 mm 1 KG ABS Filament for 3D printer Fluorescent Green

₹1,500.00 inc. GST
  • Material: ABS, 1.75 mm diameter
  • Weight: 1 kg/spool (2.2 lbs)
  • Length: approx. 400 m
  • Density at 21.5 °C: 1.01 g/cm3
  • Melt Flow Index at 10min, 2.16kg: 5
  • Melt Point: 225 – 240 °C
  • Heat-Deflection-Temperature at 0.455 MPa: 85 °C
  • Yield Strength at 5mm/min: 45 MPa
  • Impact Strength: 16 KJ/m2
  • Ensile Break: 30 %
  • Diameter: 1.75 ± 0.05 mm
  • Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole
  • Compatible with any FDM 3D Printer.
  • ABS is stronger than PLA
  • Easy to post-process.
  • Environment friendly – ISO 9001 and ROHS certified

1.75mm HIPS 3D Printer Filament Black Wanhao

₹1,500.00 inc. GST
  • Colour: Black
  • Diameter: 1.75mm
  • Material: HIPS
  • Print Temperature(Degree Celsius): 230 - 270 Deg C
  • Melting Temp: 230 - 270 Deg C
  • Highly Detailed & Quality Outputs
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • HIPS is stronger than PLA High Impact Polystyrene
  • 1kg spools on black reel
  • Highly Detailed & Quality Outputs. Every time.
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • HIPS is stronger than PLA
  • Easy to post-process.

1.75mm PLA 3D Printer Filament Black Wanhao

₹1,500.00 inc. GST
  • Material: PLA
  • Diameter: 1.75 mm
  • Printing temperature: 190-225 ° C
  • Heating bed temperature: 45 ° C - 60 ° C
  • Density: 1.25 g / cm³-21.5 ° C
  • Melt Flow Index: 5 (10min, 2.16kg)
  • Shock resistance: 5 KJ / m²
  • Dimensional accuracy: 1.70 ± 0.1 mm
  • Filament weight: 1 kg
  • Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even roundness
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less danger of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use
  • No heating bed necessary

1.75mm PLA 3D Printer Filament Brown Wanhao

₹1,500.00 inc. GST
  • Material: PLA
  • Diameter: 1.75 mm
  • 3D Printing Material
  • Suitable for printing artworks and crafts
  • PLA Filament
  • Easy to move the supporting material
  • Transparent colour, Eco-friendly
  • Diameter Accuracy: 1.75mm
  • Roundness Accuracy: +/- 0.5mm +/- 0.5mm
  • Density: 1.31g/cm3 1.01g/cm3
  • Melt Point: 210°C 220°C
  • Outer Diameter : 200 mm Hub Diameter : 32 mm
  • Packaging Vacuum-sealed with desiccant to protect filament from humidity
  • Extrusion Speed Tested up to 200mm/s
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even roundness
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less danger of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use

1.75mm PLA 3D Printer Filament Gold Wanhao

₹1,500.00 inc. GST
  • Material: PLA
  • Diameter: 1.75 mm
  • Printing temperature: 190-225 ° C
  • Heating bed temperature: 45 ° C - 60 ° C
  • Density: 1.25 g / cm³-21.5 ° C
  • Melt Flow Index: 5 (10min, 2.16kg)
  • Shock resistance: 5 KJ / m²
  • Dimensional accuracy: 1.70 ± 0.1 mm
  • Filament weight: 1 kg
  • Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even roundness
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less danger of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use
  • No heating bed necessary

1.75mm PLA 3D Printer Filament Translucent Blue Wanhao

₹1,500.00 inc. GST
  • Material: PLA
  • Diameter: 1.75 mm
  • Printing temperature: 190-225 ° C
  • Heating bed temperature: 45 ° C - 60 ° C
  • Density: 1.25 g / cm³-21.5 ° C
  • Melt Flow Index: 5 (10min, 2.16kg)
  • Shock resistance: 5 KJ / m²
  • Dimensional accuracy: 1.70 ± 0.1 mm
  • Filament weight: 1 kg
  • Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even roundness
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less danger of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use
  • No heating bed necessary

1.75mm Wood PLA 3D Printer Filament-Wanhao

₹1,700.00 inc. GST
  • High-quality starting material
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even rounding
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less risk of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use
  • No heating bed necessary Printing Settings:
  • Best Printing Temperature:200-220℃
  • Bed Temperature:0-70℃
  • Printing Speed:30~90mm/s
  • Movement Speed :90~150mm/s

100K ohm NTC 3950 Thermistor/Temperature Sensor for Reprap 3D printer Extruder

₹90.00 inc. GST
  • High-temperature Teflon wire temperature: 200 degrees
  • Nominal resistance R25 (25 ℃): 100k
  • Resistance accuracy: ± 1%
  • B value R25 / 50: 3950k
  • B value accuracy: ± 1%
  • Operating temperature range: -40 ℃ ~ +300 ℃
  • Dissipation power factor: ≥ 5 mW / ℃ (static air)
  • Thermal time constant: ≤ 7S (static air)
  • Maximum rated power: 45mW
  • Wiring length: 1 meter
  • Material: glass glaze film

12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers

₹160.00 inc. GST
  • Material: stainless steel,
  • Core: ceramic.
  • Voltage: 12V.
  • Power: 40W.
  • Diameter: 6mm, Heating Length: 20 mm.
  • Wire Length: 100 cm.
  • Works on many 3D printers, including RepRap and Prusa models.
  • It fits nicely in our extruder, so it’s an easy replacement.
  • Small but powerful.
  • Get your hotend hot quickly.
  • This unit is a more powerful unit than the standard unit for many 3D printers.

24V 40W Ceramic Cartridge Heater Wire For 3D Printer

₹175.00 inc. GST
  • Voltage: 24V, Power: 40W
  • Material: 304 Stainless Steel
  • Wire Length :1M
  • Diameter: 6mm
  • Length: 20 mm
  • Works on many 3D printers, including RepRap and Prusa models.
  • It fits nicely in our extruder, so it’s an easy replacement.
  • Small but powerful.
  • Get your hotend hot quickly.
  • This unit is a more powerful unit than the standard unit for many 3D printers.