Showing 1–12 of 79 results

Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine

₹1,750.00 inc. GST
  • Current / Phase: 1.5A
  • Step Angle(degrees): 1.8
  • Phase: 2
  • Type: Hybrid
  • Certification: ROHS,CE
  • Holding Torque: 4.2 KGCM
  • Step angle accuracy: + - 5%(full step, not load)
  • Resistance accuracy: + - 10%
  • Inductance accuracy: + - 20%
  • Temperature rise: 80deg Max(rated current,2 phase on)
  • Ambient temperature: -20deg ~+50deg
  • Insulation resistance:100M Min,500VDC
  • Insulation Strength: 500VAC for one minute
  • (Lead Screw)
  • Lead Screw Material: 304 Stainless Steel
  • Color: Sliver
  • Diameter: 8mm
  • Length: 300mm
  • Lead of thread: 8mm.

White ABS 1.75 mm 1 KG Filament-Wanhao

₹1,700.00 inc. GST
  • Material: ABS
  • Color: White
  • Material Diameter: 1.75mm
  • Printing Temperature: 220° to 230°C
  • Roundness Accuracy: +/- 0.5mm +/- 0.5mm
  • Density: 1.31g/cm3 1.01g/cm3
  • Mounted: Spool Mounted
  • Net weight: 1kg
  • Packaging Vacuum-sealed with desiccant to protect the filament from humidity
  • Highly Detailed & Quality Outputs.
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • ABS is stronger than PLA
  • Easy to post-process.
  • Environment friendly – ISO 9001 and ROHS certified

12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers

₹160.00 inc. GST
  • Material: stainless steel,
  • Core: ceramic.
  • Voltage: 12V.
  • Power: 40W.
  • Diameter: 6mm, Heating Length: 20 mm.
  • Wire Length: 100 cm.
  • Works on many 3D printers, including RepRap and Prusa models.
  • It fits nicely in our extruder, so it’s an easy replacement.
  • Small but powerful.
  • Get your hotend hot quickly.
  • This unit is a more powerful unit than the standard unit for many 3D printers.

Arduino CNC Shield v3 Engraving Machine/3D Printer/A4988 driver GRBL compatible

₹400.00
  • Coolant enable
  • Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
  • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  • Compact design.
  • Stepper Motors can be connected with 4 pin Molex connectors or soldered in place.
  • Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
  • Please note that this is an unassembled kit and needs soldering.
  • Latest Arduino CNC Shield Version 3.10
  • GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  • PWM Spindle and direction pins
  • 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)

1 meter 7 x 7 mm Cable drag Chain Wire Carrier With End Fits

₹110.00 inc. GST
  • 7 x 7 mm Cable drag Chain With End Fits
  • Radius: 15mm
  • Miniature series 7-non opening type
  • HI:7mm BI:7mm H:10mm BA:13mm
  • Pitch=16.7mm Link Per Meter=58
  • Max outer diameter of cable:5mm
  • 1-meter length
  • Long operating life
  • Good toughness
  • High performance

ARDUINO MEGA CNC SHIELD

₹700.00 inc. GST
  • Supply Voltage: 12V
  • Standard interfaces (as that of the extruder)
  • Reserved GCI like I2C and RS232
  • 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
  • Another 5A is added to protect the component parts.
  • An 11A fuse is added to the hotbed.
  • Support 5 stepper drive board

24V 40W Ceramic Cartridge Heater Wire For 3D Printer

₹175.00 inc. GST
  • Voltage: 24V, Power: 40W
  • Material: 304 Stainless Steel
  • Wire Length :1M
  • Diameter: 6mm
  • Length: 20 mm
  • Works on many 3D printers, including RepRap and Prusa models.
  • It fits nicely in our extruder, so it’s an easy replacement.
  • Small but powerful.
  • Get your hotend hot quickly.
  • This unit is a more powerful unit than the standard unit for many 3D printers.

CNC Shield V4 for Engraving Machine 3D Printers Controller Board

₹500.00 inc. GST
  • Worked with Arduino nano.
  • 3 axis stepper motor driver
  • Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
  • 2A can be controlled within the two-phase four-wire stepper motor.
  • Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
  • Released the I2C interface, you can connect to the LCD I2C or another I2C module.
  • Power DC5V interface, 7.5-12V voltage input.
  • GRBL compatible

8mm Bore Inner Ball Mounted Pillow Block

₹400.00 inc. GST
  • Type: KP08
  • Material: zinc alloy
  • Bore Diameter:8mm
  • Mounting Hole Diameter: 5 mm
  • Durable with high precision
  • Can withstand great weight
  • Durable with high precision
  • Can withstand great weight
  • The angle between the inner bearing and the outer fixing ring is adjustable
  • Easy to install

Creality ender 5 plus print large build volume ender 5 plus 3d printer with bl touch color

  •  Print Size: 300*225*380mm
  • Machine Size: 530*487*612mm
  •  Package Szie: 625*547*710mm
  • Filament diameter: 1.75 mm PLA/ABS
  • File Format: STL/OBJ/AMF
  •  Layer Heigh: 0.1-0.4mm
  • Slicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
  •  Connectivity: Online/SD card
  • Mainboard: ATmega2560 Silent board
  • UI interface: 4.3inch touch screen

Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported

• Print Size: 300*225*380mm • Machine Size: 530*487*612mm • Package Szie: 625*547*710mm • Filament diameter: 1.75 mm PLA/ABS • File Format: STL/OBJ/AMF • Layer Heigh: 0.1-0.4mm • Sicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host • Connectivity: Online/SD card • Mainboard: ATmega2560 Silent board • UI interface: 4.3inch touch screen

Creality CR-5 Pro 3D Printer with bl touch and silent motherboard 500w meanwell

• Print Size: 300*225*380mm • Machine Size: 530*487*612mm • Package Szie: 625*547*710mm • Filament diameter: 1.75 mm PLA/ABS • File Format: STL/OBJ/AMF • Layer Heigh: 0.1-0.4mm • Sicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host • Connectivity: Online/SD card • Mainboard: ATmega2560 Silent board • UI interface: 4.3inch touch screen