MACH3 interface board
- Compatible Stepper Motor Driver - Max 5 2-phase Microstep controllers
- Driver type - Pulse and Direction signal control
- Wide input voltage range: 12-24V, and with anti-reverse function.
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Maximum support 5-axis stepper motor driver controllers
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Weight - Approx. 75g
- Dimensions - 90 * 70 * 20mm
NEMA 23 10.1 kg-cm
- Operating Voltage : 2.3 Volts
- Step Angle : 1.8°
- Holding Torque : 10.1 kg-cm
- Supply Current (A) : 2.8 Ampere/Phase
- Number of Leads : 4
- Inductance : 2.2 mH/Phase
- Resistance : 0.83 Ohm
- Rotor Inertia : 275 gm-cm2
- Weight (gm) : 650
- Detent Torque (kg-cm) : 0.36
- Frame Size (mm) : 57 x 57
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm) : 6.35
- Shaft Length (mm) : 20.6
- Step Angle Accuracy : ±5%
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
NEMA 23 18.9 kg-cm
- Step Angle : 1.8 °
- Holding Torque : 18.9 kg-cm
- Operating Voltage : 3.2 Volts
- Supply Current (A)Â : 2.8 A/Phase
- No. of Leads : 4
- Inductance: 3.6 mH/Phase
- Resistance : 1.13 O/Phase
- Rotor Inertia : 480 gm-cm2
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm)Â : 6.35
- Shaft Length (mm)Â : 20.6
- Cable Length: 30 CM
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine
- Current / Phase: 1.5A
- Step Angle(degrees): 1.8
- Phase: 2
- Type: Hybrid
- Certification: ROHS,CE
- Holding Torque: 4.2 KGCM
- Step angle accuracy: + - 5%(full step, not load)
- Resistance accuracy: + - 10%
- Inductance accuracy: + - 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature: -20deg ~+50deg
- Insulation resistance:100M Min,500VDC
- Insulation Strength: 500VAC for one minute
- (Lead Screw)
- Lead Screw Material: 304 Stainless Steel
- Color: Sliver
- Diameter: 8mm
- Length: 300mm
- Lead of thread: 8mm.
Nuclear Green PLA 1.75 mm 1 KG Filament-Wanhao
- Material: PLA
- Filament Diameter: 1.75mm
- Filament Weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Melt Flow Index (g/10min): 2(190C/2.16kg)
- Dimensional Accuracy (mm): 1.75 +/- 0.02 mm
- Roundness Accuracy (mm): +/- 0.5mm
- Nozzle Temperature: 190C – 220 degree C
- Bed Temperature: 40C – 100 degree C
- Printing Speed-: 30~100mm/s
- Movement Speed: 90~150mm/s
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- High quality means less waste
- Easy to use
- Environment friendly - ISO 9001 and ROHS certified
Orange ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Orange
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Orange HIPS 1.75 mm 1 KG Filament-Wanhao
Orange PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Peacock Blue PLA 1.75 mm 1 KG Filament-Wanhao
Peak Green PLA 1.75mm 1 KG Filament-Wanhao
Pink ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Pink
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Pink PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
PLA 1.75 mm 1 kg Filament for 3D Printer, Gold Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Purple ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Purple
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Ramps 1.6 For 3D Printer Parts
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
- Design of Pololu plate pin socket can be easily replaced or removed for future design.
- I2C and SPI pins are available for future expansion.
- Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
- LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendel.
- Dimension: 101.5 * 60.5mm
Red PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
SC16UU SCS16UU 16mm Linear Ball Bearing
Silver ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Silver
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor
Sky Blue ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Sky blue
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Sky Blue PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Slate Grey ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Slate Grey
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Slate Grey PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Stepper Motor Nema 23 kg 7.2 kg Dual shaft
- Rated Voltage: 6.6 V
- Current/ phase: 1A
- Resistance/ phase: 6.6ohms
- Inductance/ phase: 8.2 mH
- Holding Torque: 7.2 kg-cm
- of Leads - 6
- Rotor Inertia - 275
- Weight: 0.65kg
- Detent Torque: 0.36 kg-cm
- Step Angle - 1.8°
- Step Angle Accuracy - ±5% (full step, no load)
- Resistance Accuracy - ±10%
- Inductance Accuracy - ±20%
- Frame Size (mm) - 57x57
- Shaft Length (mm) - 20.6
- Shaft Diameter (mm) - 6.35
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
TEVO Tarantula I3 Aluminium Extrusion 3D Printer kit
- Layer resolution of 50 microns.
- MAX Printing Speed: 150 mm/s.
- Build size: 200X 200 X 200mm.
- Full Metal Bowden Extruder.
- Material type: PLA, ABS, PETG, Wood, PVA and Flexible Filaments (With Pro Metal Extruder).
- Material specifications 1.75mm in diameter.
- Positioning accuracy: Z 0.04mm, XY 0.012mm.
- Printing Color: Single color.
- Nozzle diameter: 0.4mm.
- Recommended extruder temperature: 210°C (the maximum can be set to 260°C).
- Heating plate temperature: 60-120°C (proper winter warming and summer appropriate cooling).
- Best ambient temperature: +/-25°C.
- Power requirements: 220V, 250W, 50Hz, 0.89A.
- Connection: TF card or USB.
- The file print format: STL, G-Code.
- Compatibility: Windows, Linux, Mac.
- CE, FCC specifications: CE, FC, ROHS.
- No Printed Parts.
- Easy Assembling.
- High Performance.
- 2020 and 2040 Aluminium Frames.
- Equipment size: 430 X 440 X400mm.
- Package size: 440X 340X 190m.
- Device weight: 7.5kg.
Thread Extruder Nozzle For 3D Printer (0.3mm)
Translucent Blue PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Translucent Grey PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Translucent Orange PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Translucent Purple PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Translucent Red PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Translucent Yellow PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Transparent ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Transparent
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Wanhao Duplicator I3 Mini FDM 3d Printer
- Print size ( X Y Z ):150mm x 150mm x 115mm.
- Layer Resolution : 0.1mm.
- Filament Diameter: 1.75mm.
- Filament Compatibility: PLA, ABS, PVA, Stainless Steel, NinjaFlex, Nylon, HIPS, Woodfill, LayBrick, CopperFILL, BronzeFILL, MOLDLAY, Conductive, Carbon Fiber, Polyurethane plus more!
- Chassis Steel Frame : (Powder Coated Black).
- Extruder Type : MK10 Single-Extruder.
- Print Plate (Build Platform): Non-Heated Bed Plate and Wanhao Adhesive Sheet.
- 3D printing Software: CURA (Wanhao Edition), MatterControl (Free Download Online), Simplify 3D.
- CAD Input data file format supported - Gcode.
- Extruder Temperature: 260°C (Short-term), 240°C (Long-term).
- Connectivity (Interface) : SD Card & USB.-
- Machine weight: 7kg.
- Machine Dimensions: 385 x 435 x 330mm.