I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
5 Channel Infrared Reflective Sensor promixity sensor
₹415.00 Original price was: ₹415.00.₹399.00Current price is: ₹399.00. inc. GST
- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
- Comes with easy to use digital outputs with a direct connection to microcontrollers
- The array has mounting holes of 3mm diameter for easy mounting
- Status LED on each sensor for the detection of black line
Out of stock
This 5 Channel Line Tracking Sensor Module (TCRT5000L) is designed as a sensor board explicitly for use with line follower robots. This high sensitivity tracking sensor specifically for environmental impact is capable of accurately tracking complex black lines (white lines) for a simple black line tracking more comfortably. This module operates at a voltage range of 3.3-5.5v to meet the demand of most systems. Basically stronger the infrared reflection (white), the larger the output, the weaker the infrared radiation (black), and the smaller the output. Hence closer to the detector is to the black line, the smaller the output, so that the distance of the black line can be judged by the output analogue.
This IR reflective sensor Module is based on TCRT5000 IR Sensor IC is used to detect colour and distance. It consists of an IR transmitter & an IR receiver. IR Transmitter continuously emits IR signal which is then reflected back by an obstacle and is then detected by the IR receiver and output as an analogue value. The output analogue value is related to the object distance and the colour of the object. The TCRT500 sensor is simply a combination of a photodiode and a phototransistor.
The onboard potentiometer in the module was used to adjust the sensitivity. When the module is powered ON, the infrared diode will continuously emit the infrared rays. If the emitted infrared light has not been reflected or the strength is not big enough, the receiver diode remains in the off state and the output pin i.e. DO will be LOW. TCRT 5000 has a digital output. When the sensor detects an object, the output switches to 0V. If it does not detect any object, the output becomes 5V. This tracking sensor module provides a digital output(high and low) that easily connects to the microcontroller.

Related products
3 Channel Infrared White/Black Line Detection Module – Proximity Sensor
- Input voltage: 3.0 V – 5.5 V
- High accuracy for tracking Black/White lines.
- Distance sensor at the front, distance can be adjusted
- Special touch sensor design, making the robot design simple
- Output form: digital output (high and low level)
- Indicator LEDs
- Onboard potentiometer to adjust the sensitivity
- Detection distance: 0 – 4 cm (black and white line sensors), 0 – 5 cm (adjustable distance detection)
E-18-D80 NK Infrared sensor
- Model: E18-D80NK
- Input voltage: 5VDC
- Sensing range: 3 – 80cm
- Current Consumption: 300mA.
- Cable length: 1 m.
- Current: 100mA
- Pointing Angle: ≤ 15
- Appearance: threaded cylindrical
- Diameter: 18mm
- Length: 45mm
- Detection of object: transparent or opaque
- Output operation: normally open
- Diameter: 17MM
- Â Reverse polarity protection
- Digital Output.
- Can detect colour differences from a certain range.
- TTL output is low whenever the sensor senses an obstacle.
- External control circuit unnecessary.
- Diffuse reflective type.
- Low consumption.
- Operating temperature: -25℃ to 55℃
- Material: plastic
- Red: +5V; Yellow: Signal; Green: GND
IR LED 3mm
- Forward voltage, VF: 1.4V
- Forward Current, IF: 50mA
- Current - DC Forward (If) (Max):100mA
- Wavelength:850nm ~ 940nm
- High radiant intensity
- Peak wavelength =940nm
- 54mm Lead spacing
- High reliability.
- Low forward voltage
- Energy efficient.
- Environmentally friendly.
- Zero maintenance.
- Long life (50000 hrs to 100000 hrs).
IR LED 5mm
- Forward voltage, VF: 1.4V
- Forward Current, IF: 50mA
- Current - DC Forward (If) (Max):100mA
- Wavelength:850nm ~ 940nm
- High radiant intensity
- Peak wavelength =940nm
- 54mm Lead spacing
- High reliability.
- Low forward voltage
- Energy efficient.
- Environmentally friendly.
- Zero maintenance.
- Long life (50000 hrs to 100000 hrs).
IR-08H Infrared Obstacle Avoidance Sensor Module
- Infra-Red IR Emission Receiver IR-08H for Arduino
- Onboard with HS0038B HS38B IR receiver
- Operating Voltage: 3V – 5.5V
- Detection range : 2cm – 40cm
- Output level: Low logic level when an obstacle is detected
- Working current: 20mAh
- Working temperature: -10’C~+50’C
- IO interface: 4 line (-/+/S/EN)
- Output signal: TTL Level
- Adjusting mode: Multi resistance regulation
- Effective angle: 35°
- Size: 4.5 * 1.1cm(approx)
- Easy to assemble and use
- On-board detection indication
- Pin Connection to the board: 4 pins
- A pre-set knob to fine-tune distance range
Single Beam 15 m Photoelectric Active Infrared Intrude Detector IR Sensor Tamper Alarm
- Working Voltage: 12V, 24V
- Working Current: 50MA
- Infrared Frequency: 1.92khz
- Wavelength:940nm
- With rain-proof design
- Operating temperature: --20 degrees to 50degrees
- Relay output : 1 a max *36 v
- Response time(Relay output) <10 ms,
- Hold time(Relay output) 300ms
- Range can be reduced to 30% in bad weather conditions: for rain , dust , etc
- Unique digital filter circuit design, strong anti false alarm ability
- With high levels of anti-RFI/EMI capability
- Fully sealed design, rain-proof(fog),dust-proof(worm),suitable for hostile environment
- Used with kinds of alarm panel and access control system.
- Detector Range: indoor 20m. Outdoor 10m, Detection mode Presence(beam interruption)
- Size : 49.2 x 76 x 21.6MM,
Smart RC Line Tracker Following Robot Car Tracking kit
- Automatic Line Patrol Technology: By assembling the car, it can automatically follow the line.
- DIY Toy: The car can virtually improve children's hands-on ability and thinking ability when assembling it.
- Learning Basic Knowledge of Electronics: Products contain multiple components, which can let children know basic electronic components and cultivate their interest in programming toys.
- Suitable for people over 5 years old.
- Material: PCB + Electronic Components.
- Product Size: 10 x 10 x 5cm.
- Product Weight: 30g.
- Package Dimensions: 15 x 10 x 10cm.
TCRT5000 Module
- Model TCRT5000
- Chipset LM393
- Operating Voltage: 3.5-5 VDC
- Detection distance 1-25mm
- Operating Current: 15 mA
- Output Channel 0 or 1
- Focal Distance: 2.5 mm
- Designed with a reflected infrared sensor, indicator light.
- Built-in a potentiometer for sensitivity control.
- On-board signal output instructions, the output is a highly effective signal at the same time, the indicator lamp light output signal can be directly and single-chip microcomputer IO connection.
- Signal detection sensitivity can adjust.
- Reserve all the way more circuits (P3 voltage drawn)
- Output form: digital switch output (0 and 1)
- A fixed bolt hole, convenient installation.
- Dimension:32*11*20mm
- Weight:22gm

Reviews
There are no reviews yet.