I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-10%Sold out
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
Original price was: ₹450.00.₹400.00Current price is: ₹400.00. inc. GST
Anti-Corrosion Water Level Sensor with Ball Float Switch
Original price was: ₹400.00.₹350.00Current price is: ₹350.00. inc. GST
Floating Straight Automatic Water Level Control For Water Tank-14014449MG
Original price was: ₹500.00.₹450.00Current price is: ₹450.00. inc. GST
- Automatic Control, Low Self-Complementary Water, Water Full Automatic Stop.
- Four Intakes, Large Volume Of Water.
- Beautiful Appearance, Small Size, Practical, Simple Installation.
- Without Electricity, Easy To Use, Long Life, Low Failure Rate, Saving Water Resources.
- Working Pressure Range: 0.2-10Kg.
- Applicable Medium: Clean Water.
- Applicable Medium Temperature: ≤70degree C
- Resistance to High-Temperature to Medium Temperature: 70degree to 120degree C
- Material: Nylon Pa66, Stainless Steel Screws, Food Grade Rubber.
- Diameter: Approx. 46Mm / 1.81Inch.
- Dimension: Approx. 83*71mm
Out of stock
Description
Floating Straight Automatic Water Level Control For Water Tank-14014449MG designed as a replacement of the Traditional Float Ballcock. This water level controller can be widely used in various systems such as high water tanks, Pools, Water Towers Of The Industry And Civil Construction, Etc.
In this water level controller, when the water level in the pool or tank falls, the valve body will sink down. As a result, the forerunner of the control valve will be opened. So as the pipe water pressure affects, the seal face of the control valve will be opened. Finally, the water comes out and vice versa. This water level controller operates in clean water at a temperature of 70 degrees C. This automatic control device functions without electricity featuring Automatic Control, Low Self-Complementary Water, Water Full Automatic Stop. It consists of four intakes for water, thus a large volume of water can be operated at a time. Moreover, this compact-sized, beautiful appearance water level controller is quite simple to install.
NOTE:
- Maintain the valve regularly, if water quality is not good.
- In case, if the user finds the time of adding Water Becomes Longer, he can just upload the water inlet and make it washed.
APPLICATION:
- Water tower tank
- Solar, Toilet, Aquarists
- Agricultural Irrigation
- Food Machinery, humidifiers, heaters,
- Livestock drinking and swimming pool water control.
+
Reviews (0)
Shipping & Delivery
Related products
40A DC MOTOR SPEED REGULATOR PWM CONTROLLER 2000W
- Speed controller model: 40A PWM DC motor speed regulator
- Operating voltage: 10V TO 50V
- Peak current: 40A
- Control power: 0.01-2000W
- Quiescent current: 0.025A
- PWM regulation: 5-100%
- PWM frequency: 12KHz
- Operating temperature: -20 degree to 40 degree Celsius
- Stability in working
- High efficiency
- potentiometer used for speed adjustability
- Dimension: 9*5.1mm
- Weight: 95gm
DN40 – 1.5” Water Flow Sensor
- Model: YF-DN40
- Material: Plastic
- Function: Sensor, flow rate control
- Working Voltage: DC 5V~24V
- Thread size: BSP 1 1/2”
- Size:L 92x OD46 5"
- Colour: Black color
- Flow rate: 5~200L/min
- Flow Pulse: F(Hz)=(0.45xQ) +/-3% Q=L/min
- 1L water= 27Pulse
- Working Current: 15mA (DC5 V)
- Working Voltage: DC 4.5V
- Load Capacity: =10 mA (DC 5 V)
- Operating Working Temperature: -25 to +80 Degree C
- Liquid Temperature: 85
- Accuracy: 3~5%
- Working environment: water, liquid, light oil etc.
- Hydrostatic pressure> 1.75MPa meet
- Insulation resistance> 100M> 100M
- Accuracy in 1 ~ 120L / MIN ± 2% in line
- Flow pulse characteristics F = (0.45 * Q) Q = L / Min meet
- Weight: 146g
Floating Ball Valve Automatic Float Valve Water Level Control Valve F/ Water Tank Water Tower
- Material: plastic
- Form: diaphragm type
- Connection form: thread
- Drive mode: float control
- Flow direction: one direction
- Nominal diameter:15mm
- Automatic control, less water from the fill, the water from the stop.
- Quarter of the inlet, a large amount of water.
- The appearance of fine, small size, practical, simple installation.
MH1210W 72V 250V 10A Digital Temperature Controller
- Working voltage: DC 9-72V/AC90-250V ± 10%, 50/60 HZ
- Rated current: 10 A
- Power consumption: ≤3 W
- Measurement range: -50~110 °C
- Measurement precision: 0.1 °C
- Measurement error: ±0.3 °C
- A mini temperature controller.
- Large and clear LED display for better readability
- Wide temperature measuring range
- Heating and cooling control
- Temperature calibration
- Delay protection function
- All parameters reset to default settings after short circuit
PWM 10A DC MOTOR SPEED CONTROL
- Working voltage:12V to 40V DC
- Maximum output power: 400 watt
- Current:10A, 100watt
- Static current:0.02A
- PWM duty cycle:10% - 100%
- PWM frequency:13KHz
- With reverse polarity protection, high current protection
- High efficiency and torque
- Control voltage over-voltage protection
- Low heat generation
- Material used: metal
- Dimensions:6*5.6*3cm
- SIZE: 64gm
YF-S201 ½” Water Flow Sensor
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC
- Max current draw: 15mA @ 5V.
- Output Type: 5V TTL
- Pulses per Litre: 450
- Working Flow Rate: 1 to 30 Liters/Minute
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Durability: minimum 300,000 cycles
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread.
- The simple and compact module.
- Easy to Install.
- High Sealing Performance.
- High-Quality Hall Effect Sensor.
YF-S401 PVC Water Flow sensor
- Model: YF-S402
- Voltage Range: 5~12 V
- Operating Current: 15 mA (DC 5V)
- Insulation Resistance: >100 MΩ
- Inner Diameter: 4 mm
- Outside diameter: 7 mm
- Proof Water Pressure: <0.8 MPa
- Water Flow Range: 0.3-6 L/min
- Accuracy: ±5% (0.3-3L/min)
- Output Pulse High Level: >4.5 VDC (DC input voltage 5 V)
- Output Pulse Low Level: <0.5 VDC (DC input voltage 5 V)
- Output Pulse Duty Ratio: 50% ± 10%
- Water-flow Formula: 1L = 5880 square waves
- Working Humidity Range: 35% ~ 90% RH (no frost)
- 6 mm hose is recommended
- Avoid unit contact with corrosive chemicals
- The unit must be installed vertically, tilted no more than 5 degrees
- The liquid temperature should be less than 120 C to avoid damage to the unit
- With stainless steel axis in the wheel, abrasion-resistant
- Dimension: 58*35*26 mm
- Weight: 30g
YF-S403 water flow sensor 1-30L/min Flow meter
- Model: YF-S403
- The lowest rated working voltage: DC 4.5 5V - 24V.
- Maximum Operating Current: 15 mA (DC 5V).
- Working voltage range: DC 5 - 18V.
- Load capacity: ≤ 10 mA (DC 5V).
- Working temperature: ≤ 80 ℃
- Working humidity range: 35%-90% RH (no frost)
- Allow Pressure: 1.75Mpa
- Storage temperature: -25 - + 80 ° c
- Save Humidity: 25% - 95% RH
- Flow range: 1-30L / min
- External thread: 3/4 "
- Output interface diameter: Ca. Outside 26mm, inside 12mm, 14mm.
- The seal ring with the upper and lower force structure never leaks.
- Non-violent shock, and chemical erosion.
- Non-throwing or hitting.
- Vertical mounting does not exceed 5 degrees inclination.
- The temperature of the medium should not exceed 120 ℃.
- Dimension: 58*35*26 mm
- Weight: 30g
Reviews
There are no reviews yet.