I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
IRF620 N-Channel Power Mosfet Transistor 200V 5.2A
₹35.00 Original price was: ₹35.00.₹30.00Current price is: ₹30.00. inc. GST
- N-Channel Power Mosfet
- Low RDS(ON)
- Low Drive Requirements
- Ease of Paralleling
- Drain Current: ID= 5.2A at TC= 25℃
- Drain Source Voltage: VDSÂ = 200V
- Static Drain-Source On-Resistance: RDS(on) =0.8 Ω
- Power Dissipation: 50W
- Package: TO-220AB
IRF620 Power Mosfet Transistor 200V 5.2A series designed by the Advanced HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques. These power MOSFET Transistors designed explicitly to achieve extremely low on-resistance per silicon area. This feature makes this device ideal for use as primary switch in advanced high-efficiency isolated DC-DC converters for telecom and computer applications. And also for applications with low on-resistance requirements. IRF620 manufactured in TO-247AC package that is universally accepted for all commercial-industrial applications. Also at power dissipation levels to approximately 300 watts.Â
IRF620 is simply a three-terminal silicon device, that offers a current conduction capability of about 200A, fast switching speed. Moreover, it features low on-state resistance, and breakdown voltage rating of 5.2V. These power Mosfet device offers a wide range of applications in electronic ballast, and low power switching mode power appliances. These resulting transistor exhibit extremely high packing density for low on-resistance. And also combined with high switching speed and rugged device design that HEXFET power MOSFETs. Thus provides the designer with an extremely efficient and reliable device for use in a wide variety of applications.Â
A power MOSFET designed as a special type of metal–oxide–semiconductor field-effect transistor (MOSFET) explicitly to handle significant power levels. This Power MOSFET Transistor features high switching speed and good efficiency at low voltages. It is one of the prominent power semiconductor device in the world, due to its low gate drive power, fast switching speed, easy advanced paralleling capability, wide bandwidth. Thus makes it ideal for use in wide range of applications such as in low-voltage (less than 200 V) switch.

Related products
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
4 Pin RMC Connector
5 Pin RMC Connector
ADXL 335 Accelerometer IC
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
- 8V- 3.6V single-supply operation
- Integrated X, Y, and Z axis accelerometer on a single chip
- X and Y axis has a 0.5Hz to 1600Hz bandwidth
- Z axis has a 0.5Hz to 550Hz bandwidth
- Hermetically sealed for temp and humidity resistance
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.

Reviews
There are no reviews yet.