I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-17%
SI4432 WIRELESS MODULE
Original price was: ₹550.00.₹500.00Current price is: ₹500.00. inc. GST
USB TO RS-485 CONVERTER
Original price was: ₹550.00.₹400.00Current price is: ₹400.00. inc. GST
PL2303 USB TO TTL CONVERTER
Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
- USB specification 2.0 compliant with full-speed 12Mbps.
- Operation Level-Digital 5V
- Power Supply-External 5V
- Standard USB type A male and TTL 6pin connector.
- 6 pins for 3.3V, RST, TXD, RXD, GND & 5V.
- All handshaking and modem interface signals.
- Baud rates: 300 bps to 1.5 Mbps.
- Byte receives buffer; 640 bytes transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40.
- Simple serial communication.
- Router or ADSL firmware upgrade.
- Easy to use, RX to the MCU’s TX; TX to the MCU’s RX. and then connected to the GND. Without having to use the MAX232 conversion.
Description
This PL2303 USB to TTL converter module is an integrated USB to TTL UART Converter module. This module consists of the PL2303 Bridge IC designed on basis of Prolific Technology. The PL2303 UART module is a simple solution to update the design of the RS-232 using minimal components and PCB space. PL2303 USB to TTL converter allows asynchronous serial data bus compliant with USB2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, with full modem control. As a result, this module doesn’t need any external components.
PL2303 is used as a standard serial port with Laptops that don’t have a standard serial port. It creates a virtual COM port using the USB on the PC. And this supports a standard baud rate of 300 bps to 1.5 Mbps for serial communication. The LED present in the data lines of the module indicates real-time data transfer status. This module consists of a 500 mA self-recovery fuse used for any protection purpose. PL2303 board is entirely coated by the high-quality transparent heat-shrinkable sleeve. This makes the PCB to insulation state from outside so that the board is not affected by any material shortcut burn.
PL2303 is used with a standard 0.1″ pitch terminal strip to connect directly to UART or I/O pins for easy access to your MCU. This module is compatible with 32-bit & 64-bit Windows, Mac OS 8 to OS X, Linux, and Android. These modules are reserved to operate in 3.3V and 5V pin interface, which makes it easier for the DDWRT of different voltage system that needs power.
Application of PL2303 Module
- Debug purpose in the development
- Microcontroller to PC communication
- Programming related purposes
Reviews (0)
Shipping & Delivery
Related products
1 CHANNEL 5V RELAY
- 1 channel relay board
- Operating voltage: 5V
- Maximum current: 2 A
- Relay contact current capacity of 10A @250 V AC/10A@ 30V AC
- configured as SINGLE POLE DOUBLE THROW( SPDT)
- LED status indicates relay ON/OFF state.
- Standard TTL level logic controlled
- One normally closed and one normally opened contact
- Compatible with any 5V microcontroller
- Dimension: 43*17*17mm
- Weight: 150gm
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver
- USB interface
- With CH341A chip
- Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
- With 24/25 status indicator lamp
- Support USB to TTL conversion
- Support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
- Recognize 25 series chip automatically
- Supports download STC series procedure of single chip
- SPI pin to support expanding the utility
- STC microcontroller supports a full range of program download
- Support expanding the utility by SPI pin
- With SOP8 SOP16 to DIP8 converter board
- Used in wide applications – PC motherboard, LCD monitor, DVD, router program reading and writing
- Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
- Provide 5V-3.3V power supply output
PICKIT2 Microcontroller USB Programmer PIC KIT2 Burner
- Supported Device Families: PIC10F,PIC112F, PIC16F,PIC18F,PIC24
- Programs all current 8-, 16-, and 32-bit Flash PIC microcontrollers.
- Includes the UART Tool and Logic Tool microcontroller development utilities.
- With a portable USB power source, PICkit 2 will program the downloaded code into a PIC Microcontroller
- High-quality PCB FR4 Grade with FPT Certified
STC Automatic Programmer USB – TTL 5V 3.3V SCM Burning Programmer
- Supports 3.3V and 5V STC full range of all SCM burning procedures.
- Highest baud rate 115200
- Programmer automatically downloads without cold start, no need to frequently power down SCM.
- 4The burner with USB to TTL, USB to serial port function, can be used for USB to TTL electronic product upgrades, does not affect the normal serial communication debugging
- The success rate of STC12, STC15, STC11, STC10 series programs can be up to100%.
- Programmer uses CH340 + SCM control core.
- With 500MA self-recovery fuse, perfect to protect your computer motherboard!
- Metal aluminium shell protection burner motherboard.
- The interface definition is printed on the shell.
- When burning STC SCM, after clicking download, the light will go out, it will flash when there is data transmission, if no data transmission, it will always keep bright.
- Support win7 8 10 system (64-bit and 32-bit system)
USBASP PROGRAMMER
- No special USB controller required
- Programming speed is up to 5Kbytes/sec
- Working platform: Linux, Windows, Mac OS X
- Allows to read or write the microcontroller EEPROM, firmware, fuse bits, and lock bits
- No special controllers or SMD components are needed.
- Target is supported by the SCK option with a low clock speed (<1.5MHz)
- Programming status and Bus status are easily identified
- The easy interface is achieved by Header pins for various ISP header pins
- Dimension: 63.3*20.5*10.5mm
- Weight: 15gm
Reviews
There are no reviews yet.