I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-13%
Pedal Throttle for Electric Scooter/Bike/Tricycle Accelerator Foot Pedal - Type 2
Original price was: ₹1,500.00.₹1,200.00Current price is: ₹1,200.00. inc. GST
250W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit - Basic
Original price was: ₹13,500.00.₹12,000.00Current price is: ₹12,000.00. inc. GST
TDA7498 High Power Digital Amplifier Board 2*100W DC 14-34V Audio Stereo Amplifier Board
Original price was: ₹1,500.00.₹1,300.00Current price is: ₹1,300.00. inc. GST
- High power class d digital amplifier.
- Two-channel stereo, 2x100w power output.
- Material: Metal
- 100 W + 100 W output power at THD = 10% with RL = 6 Ω and VCC = 36 V
- Wide-range single-supply operation (14 – 39 V)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB
- Applicable speaker impedance: 4/6/8 ohm(8 ohm is the best).
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection
- Thermal overload protection
- Externally synchronizable
- size: 110*70*10mm
Description
TDA7498 High Power Dual Channel Stereo Audio Amplifier is a 14-36 power supply On-board TDA7498 stereo audio amplifier chip. TDA7498 digital amplifier board module based on dual BTL class-D audio amplifier with a single power supply module designed specifically for home systems and active speaker applications. It is a linear circuit with a dual-channel, capable of 100w+0W power output, and generates a peak output current of 8A. Thus Dual Channel Stereo Audio Amplifier board module offers very low harmonic distortion and better sound quality. And it can drive 4/6/8 ohm speakers.
It supports Wide-range single-supply operation of 14V – 30 V providing an efficiency of 90%. TDA7498 digital amplifier board module has 5 control buttons. These control buttons are used to change the track or control the volume. Meanwhile, the DIP 2 switches button functions as combining the up/down position of each switch you can obtain 4 different filters for the output. TDA7498 High output power digital amplifier features reverse polarity protection. When the heat sink temperature rises to a certain value, the cooling fan will work. It comes in a 36-pin Power SSO package with an exposed pad up (EPU) to facilitate mounting a separate heatsink.
This amplifier allows the selection of four fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB settings via DIP switch selection. The Parallel BTL function in the amplifier performed using the MODE pin. It also has a power indicator to identify the power state of the module. Moreover, it features a thermal overload protection system and features both system shutdown and mute control function.
Reviews (0)
Shipping & Delivery
Related products
LM3886 68W Audio Power Amplifier IC
- High-Performance 68W Audio Power Amplifier with Mute
- 68W cont. avg. output power into 4Ω at VCC = ±28V
- 38W cont. avg. output power into 8Ω at VCC = ±28V
- 50W cont. avg. output power into 8Ω at VCC = ±35V
- 135W instantaneous peak output power capability
- Signal-to-Noise Ratio ≥ 92dB
- An input mute function
- Output protection from a short to ground or to the supplies via internal current limiting circuitry
- Output over-voltage protection against transients from inductive loads
- Wide supply range 20V - 94V
- 11-lead TO-220 package
POWER SUPPLY TDA2030 Audio Amplifier
- Operating voltage: 6V-12V
- Output peak current: 3A
- Onboard TDA2030A Audio amplifier Board
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- Onboard 10 k adjustable resistance, can adjust the volume of the amplification
- Onboard power indicator light
- Low harmonic distortion
- Chip has lead to the main pin, can directly input audio signal
- Short circuit& thermal shutdown protection
- Dimension:32*24mm
- Weight:10gm
Red – 2 Channel 3W Digital Power PAM8403 Class D Audio Amplifier Board USB 5V
- Input Voltage: 2.5-5.5 V (USB power supply).
- Output Impedance: 4 ohm.
- Efficiency: 90%.
- Frequency Response: 150 Hz – 20 KHz.
- Input Impedance: 2 K ohm.
- A class D-type amplifier without a filter, low quiescent current, and low EMI.
- Good noise suppression.
- Input audio should be via sheilded wire.
- Dual channel stereo output 3 w + 3 w power.
- Works with 5v power supply.
- Can directly drive 4 /8 Ohm small speakers.
- When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
- Low THD, low noise.
- Short circuit protectioN, thermal protection.
- Dimensions: 15 x 20 mm.
TDA7492P 50W Wireless Bluetooth 4.0 Audio Receiver with Digital Amplifier
- Wide-range single-supply operation (8 – 26 V)
- Audio input: Stereo input various versions of the Bluetooth connection, using CSR8635 Bluetooth chip, Bluetooth v4. 0, high software compatibility
- 25 W + 25 W continuous output power at THD = 10% with VCC= 20 V and RL= 8 Ω
- Output impedance: 8o (4, 6, 8, 16o impedance can drive speakers)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 21.6 dB, 27.6 dB, 31.1 dB and 33.6 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection
- Thermal overload protection
- Externally synchronizable
- Colour: Red
- Material: Plastic
TDA7498E Double 160W Power Amplifier Dual Channel Stereo Audio Amplifier Module Support BTL Mode
- Amplifier chip: TDA7498E
- Working voltage: DC 15-36V (Recommend 32V, 8A, if power is too small will appear distortion and so on.)
- Output power: 2 x 160W
- Number of channels: Two-channel Stereo
- Efficiency: 85%
- Applicable speaker impedance: 4/6/8ohm (8ohm is the best).
- 160-W + 160-W output power at THD = 10% with RL = 4 Ω and VCC = 36 V
- 1 x 220 W output power mono parallel BTL at THD = 10% with RL = 3 Ω and VCC = 36 V
- Wide-range single-supply operation (14 - 36 V)
- High efficiency (η = 85%)
- Parallel BTL function using the MODE pin
- Four selectable, fixed gain settings of nominally 23.8 dB, 29.8 dB, 33.3 dB and 35.8 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Smart protection
- Thermal overload protection
- Small offset less than 20 mV
- PCB board size: 108 x 78mm
- Weight: 172g(approx.)
VS1053 MP3 Recording Module Development Board with Onboard Recording For UNO
- SPI interface, the control signal lines are led out
- A headphone and stereo output
- Onboard Microphone for recording
- A line-in input interface
- Separate 3.5 mm Jack for MIC and Speaker
- Onboard Power Indicator
- 3V and 2.8V of LDO chip AMS-1117 on board provides up to 800mA current
- Can play a variety of music formats, support for OGG encoding real-time recording
- A single power supply: +5 VDC
- 288 Mhz crystal
- TF card slot
Reviews
There are no reviews yet.