I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-14%Sold out
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine
Original price was: ₹2,000.00.₹1,750.00Current price is: ₹1,750.00. inc. GST
1 meter 7 x 7 mm Cable drag Chain Wire Carrier With End Fits
Original price was: ₹150.00.₹110.00Current price is: ₹110.00. inc. GST
TDA7498E Double 160W Power Amplifier Dual Channel Stereo Audio Amplifier Module Support BTL Mode
Original price was: ₹1,850.00.₹1,600.00Current price is: ₹1,600.00. inc. GST
- Amplifier chip: TDA7498E
- Working voltage: DC 15-36V (Recommend 32V, 8A, if power is too small will appear distortion and so on.)
- Output power: 2 x 160W
- Number of channels: Two-channel Stereo
- Efficiency: 85%
- Applicable speaker impedance: 4/6/8ohm (8ohm is the best).
- 160-W + 160-W output power at THD = 10% with RL = 4 Ω and VCC = 36 V
- 1 x 220 W output power mono parallel BTL at THD = 10% with RL = 3 Ω and VCC = 36 V
- Wide-range single-supply operation (14 – 36 V)
- High efficiency (η = 85%)
- Parallel BTL function using the MODE pin
- Four selectable, fixed gain settings of nominally 23.8 dB, 29.8 dB, 33.3 dB and 35.8 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Smart protection
- Thermal overload protection
- Small offset less than 20 mV
- PCB board size: 108 x 78mm
- Weight: 172g(approx.)
Out of stock
Description
TDA7498E Dual Channel Stereo Audio Amplifier is a 15-36V On-board  TDA7498E stereo audio amplifier chip. TDA7498E digital amplifier board module based on dual BTL class-D audio amplifier with a single power supply module designed specifically for home systems and active speaker applications. It is a linear circuit with a dual-channel, capable of 2 x 160W power output, and generates a peak output current of 8A. Thus Dual Channel Stereo Audio Amplifier board module offers very low harmonic distortion and better sound quality. And it can drive 4/6/8 ohm speakers.
It supports Wide-range single-supply operation of 15V – 36 V providing an efficiency of 85%. TDA7498E digital amplifier board module has 5 control buttons. These control buttons are used to change the track or control the volume. Meanwhile, the DIP 2 switches button functions as Combining the up/down position of each switch you can obtain 4 different filters for the output. TDA7498E  High output power digital amplifier features reverse polarity protection. When the heat sink temperature rises to a certain value, the cooling fan will work. It comes in a 36-pin Power SSO package with an exposed pad up (EPU) to facilitate mounting a separate heatsink.
This amplifier allows the selection of four fixed gain settings of nominally 23.8 dB, 29.8 dB, 33.3 dB, and 35.8 Db settings via DIP switch selection. The  Parallel BTL function in the amplifier performed using the MODE pin. It also has a power indicator to identify the power state of the module. Moreover, it features a thermal overload protection system and features both system shutdown and mute control function.
Reviews (0)
Shipping & Delivery
Related products
LM3886 68W Audio Power Amplifier IC
- High-Performance 68W Audio Power Amplifier with Mute
- 68W cont. avg. output power into 4Ω at VCC = ±28V
- 38W cont. avg. output power into 8Ω at VCC = ±28V
- 50W cont. avg. output power into 8Ω at VCC = ±35V
- 135W instantaneous peak output power capability
- Signal-to-Noise Ratio ≥ 92dB
- An input mute function
- Output protection from a short to ground or to the supplies via internal current limiting circuitry
- Output over-voltage protection against transients from inductive loads
- Wide supply range 20V - 94V
- 11-lead TO-220 package
PAM8403 DIGITAL AMPLIFIER BOARD
- 3W output at 10% THD with a 4ohm load & 5V power supply
- Output power: 3W
- Supply voltage: 2.5V-5.5V
- Low THD+N
- Superior low noise
- efficiency up to 96%
- Thermal shutdown
- Low quiescent current and low EMI
- Few external components to save space & cost
- High fidelity sound output 3W + 3W, is a rare good product
- High amplification efficiency of 85%
- Unique without LC filter class D digital power board
- Can use computer USB supply directly
- High life expectancy up to 15 years
- Dimension:24*15mm
POWER SUPPLY TDA2030 Audio Amplifier
- Operating voltage: 6V-12V
- Output peak current: 3A
- Onboard TDA2030A Audio amplifier Board
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- Onboard 10 k adjustable resistance, can adjust the volume of the amplification
- Onboard power indicator light
- Low harmonic distortion
- Chip has lead to the main pin, can directly input audio signal
- Short circuit& thermal shutdown protection
- Dimension:32*24mm
- Weight:10gm
TDA7492 50W*2 100W High Power Digital Amplifier Board
• Class D amplifier produces 2 x 50 watt @ 8 ohms
• Can be wired R+ to L+ for mono mode
• 8″ stereo wiring harness included
• Short-circuit and over-temperature protection
• Supply Voltage 10-26 V DC.
• Standby and mute features
• Short-circuit protection
• Thermal overload protection
• Externally synchronizable
TDA7498 High Power Digital Amplifier Board 2*100W DC 14-34V Audio Stereo Amplifier Board
- High power class d digital amplifier.
- Two-channel stereo, 2x100w power output.
- Material: Metal
- 100 W + 100 W output power at THD = 10% with RL = 6 Ω and VCC = 36 V
- Wide-range single-supply operation (14 - 39 V)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB
- Applicable speaker impedance: 4/6/8 ohm(8 ohm is the best).
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection
- Thermal overload protection
- Externally synchronizable
- size: 110*70*10mm
Reviews
There are no reviews yet.