I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-14%
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine
Original price was: ₹2,000.00.₹1,750.00Current price is: ₹1,750.00. inc. GST
1 meter 7 x 7 mm Cable drag Chain Wire Carrier With End Fits
Original price was: ₹150.00.₹110.00Current price is: ₹110.00. inc. GST
TDA7498E Double 160W Power Amplifier Dual Channel Stereo Audio Amplifier Module Support BTL Mode
Original price was: ₹1,850.00.₹1,600.00Current price is: ₹1,600.00. inc. GST
- Amplifier chip: TDA7498E
- Working voltage: DC 15-36V (Recommend 32V, 8A, if power is too small will appear distortion and so on.)
- Output power: 2 x 160W
- Number of channels: Two-channel Stereo
- Efficiency: 85%
- Applicable speaker impedance: 4/6/8ohm (8ohm is the best).
- 160-W + 160-W output power at THD = 10% with RL = 4 Ω and VCC = 36 V
- 1 x 220 W output power mono parallel BTL at THD = 10% with RL = 3 Ω and VCC = 36 V
- Wide-range single-supply operation (14 – 36 V)
- High efficiency (η = 85%)
- Parallel BTL function using the MODE pin
- Four selectable, fixed gain settings of nominally 23.8 dB, 29.8 dB, 33.3 dB and 35.8 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Smart protection
- Thermal overload protection
- Small offset less than 20 mV
- PCB board size: 108 x 78mm
- Weight: 172g(approx.)
Description
TDA7498E Dual Channel Stereo Audio Amplifier is a 15-36V On-board TDA7498E stereo audio amplifier chip. TDA7498E digital amplifier board module based on dual BTL class-D audio amplifier with a single power supply module designed specifically for home systems and active speaker applications. It is a linear circuit with a dual-channel, capable of 2 x 160W power output, and generates a peak output current of 8A. Thus Dual Channel Stereo Audio Amplifier board module offers very low harmonic distortion and better sound quality. And it can drive 4/6/8 ohm speakers.
It supports Wide-range single-supply operation of 15V – 36 V providing an efficiency of 85%. TDA7498E digital amplifier board module has 5 control buttons. These control buttons are used to change the track or control the volume. Meanwhile, the DIP 2 switches button functions as Combining the up/down position of each switch you can obtain 4 different filters for the output. TDA7498E High output power digital amplifier features reverse polarity protection. When the heat sink temperature rises to a certain value, the cooling fan will work. It comes in a 36-pin Power SSO package with an exposed pad up (EPU) to facilitate mounting a separate heatsink.
This amplifier allows the selection of four fixed gain settings of nominally 23.8 dB, 29.8 dB, 33.3 dB, and 35.8 Db settings via DIP switch selection. The Parallel BTL function in the amplifier performed using the MODE pin. It also has a power indicator to identify the power state of the module. Moreover, it features a thermal overload protection system and features both system shutdown and mute control function.
Reviews (0)
Shipping & Delivery
Related products
LM1875 20W Audio Power Amplifier IC
- 20W Audio Power Amplifier
- AVO typically 90 dB
- Low distortion: 0.015%, 1 kHz, 20 W
- Wide power bandwidth: 70 kHz
- Protection for AC and DC short circuits to ground
- Thermal protection with parole circuit
- High current capability: 4A
- Wide supply range 16V-60V
- Internal output protection diodes
- 94 dB ripple rejection
- Plastic power package TO-220
LM1876 Dual 20W Audio Power Amplifier IC
- Dual 20W Audio Power Amplifier with Mute and Standby Modes
- Spike Protection
- Minimal amount of external components necessary
- Quiet fade-in/out mute mode
- Standby-mode
- Isolated 15-lead TO-220 package
- THD+N at 1 kHz at 2 x 15W continuous average output power into 4Ω or 8Ω: 0.1% (max)
- THD+N at 1 kHz at continuous average output power of 2 x 20W into 8Ω: 0.009% (typ.)
- Standby current: 4.2 mA (typ.)
MT8870 DTMF Audio/Speech Decoding Telephone Module
- Power Input: 5V Nominal (4.5V - 5.5V)
- 5 Channel Interface
- Detects 0-9, A-D, *, #
- 54” Pin pitch
- On-board 3.5mm jack input Facility
- On-board MT8870 frequency decoder chip
- On-board voice input interface
- On-board LED lights for output state indication
- Low power consumption
- Internal gain setting amplifier
- Adjustable guard time
- 5 Channel interface
- Power-down mode
- Inhibit mode
- Does not require external circuits or wiring,
- Dimension: 37 x 25 x 12 mm
POWER SUPPLY TDA2030 Audio Amplifier
- Operating voltage: 6V-12V
- Output peak current: 3A
- Onboard TDA2030A Audio amplifier Board
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- Onboard 10 k adjustable resistance, can adjust the volume of the amplification
- Onboard power indicator light
- Low harmonic distortion
- Chip has lead to the main pin, can directly input audio signal
- Short circuit& thermal shutdown protection
- Dimension:32*24mm
- Weight:10gm
TDA7492P 50W Wireless Bluetooth 4.0 Audio Receiver with Digital Amplifier
- Wide-range single-supply operation (8 – 26 V)
- Audio input: Stereo input various versions of the Bluetooth connection, using CSR8635 Bluetooth chip, Bluetooth v4. 0, high software compatibility
- 25 W + 25 W continuous output power at THD = 10% with VCC= 20 V and RL= 8 Ω
- Output impedance: 8o (4, 6, 8, 16o impedance can drive speakers)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 21.6 dB, 27.6 dB, 31.1 dB and 33.6 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection
- Thermal overload protection
- Externally synchronizable
- Colour: Red
- Material: Plastic
Reviews
There are no reviews yet.