DLO165 Power Switch IC
- Power Switch
- Supply Voltage Max.: 20V
- Total Power Dissipation: 1.25W
- Drain-Source Voltage: 650V
- On-State Resistance Max.: 10Ω
- Rise Time : 4ns
- Rise Time: 10ns
- Output Frequency Max.: 55KHz
- Duty Cycle Max.: 83%
- Operating Current Max.: 5mA
- Over Voltage Protection Min.: 18V
- Precision fixed operating frequency (100/67/50kHz)
- Low start-up current (typ. 100µA)
- Pulse by pulse current limiting
- Over-current protection
- Overvoltage protection (Min. 25V)
- Internal thermal shutdown function
- Under voltage lockout
- Internal high voltage sense FET
- Auto-restart mode
DM002 DIY Drone Kit
DM556 Digital Stepper Motor Driver with Micro Stepping 20 to 50V 5.6A
- Good high-speed performance
- Supply voltage: +50VDC
- Output current from 0.5A to 5.6A
- Pulse input frequency up to 200 kHz
- Extremely cost-effective
- Automatic idle-current reduction
- Self-test and Auto-configuration technology TTL compatible and optically isolated input
- Micro step resolutions programmable, from full-step to 102,400 steps/rev
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Anti-Resonance provides optimum torque and nulls mid-range instability
- Extra-low motor noise offers excellent quietness
- Over-voltage, over-current protection and phase error protection
DM556 STEPPER DRIVER
DMO465R Power Switch IC
DMO565R Power Switch IC
DMV1500SD Dual Diode
- High breakdown voltage capability
- Very fast recovery diode
- Low static and peak forward voltage drop for low dissipation
- Insulated version:
- Insulated voltage = 2000 VRMS
- Capacitance = 7 pF
- Planar technology allowing high quality and best electrical characteristics
- Outstanding performance of well proven DTV as damper and new faster Turbo 2 600V technology as modulation
- Junction to case thermal resistance Rth(j-c): 4°C/W
- Storage temperature range Tstg: -40 to +150°C
- Maximum operating junction temperature Tj: 150°C
DMV32 Dual Diode
DN40 – 1.5” Water Flow Sensor
- Model: YF-DN40
- Material: Plastic
- Function: Sensor, flow rate control
- Working Voltage: DC 5V~24V
- Thread size: BSP 1 1/2”
- Size:L 92x OD46 5"
- Colour: Black color
- Flow rate: 5~200L/min
- Flow Pulse: F(Hz)=(0.45xQ) +/-3% Q=L/min
- 1L water= 27Pulse
- Working Current: 15mA (DC5 V)
- Working Voltage: DC 4.5V
- Load Capacity: =10 mA (DC 5 V)
- Operating Working Temperature: -25 to +80 Degree C
- Liquid Temperature: 85
- Accuracy: 3~5%
- Working environment: water, liquid, light oil etc.
- Hydrostatic pressure> 1.75MPa meet
- Insulation resistance> 100M> 100M
- Accuracy in 1 ~ 120L / MIN ± 2% in line
- Flow pulse characteristics F = (0.45 * Q) Q = L / Min meet
- Weight: 146g
Double Analog Potentiometer Module With Slide Potentiometer Slip Adjustable Resistance For Arduino
- Dual analogue output, output 0-VCC analogue voltage signal.
- Voltage: 3.3V, 5V.
- Port: Analog.
- Resistance: 10K.
- Slide potentiometers module
- Two analogue outputs, analogue outputs 0-VCC voltage signals
- Stable and reliable performance with high-quality sliding appliances
- Platform: Arduino, MCU, ARM, and other microcontroller platforms
- Application: Raspberry Pi projects, DIY projects, Arduino projects.
- Dimensions: 91 x 21 x 30 mm
- Weight: 18 gm.
Double Head 2 in 1 out J-Head Remote Extruder 3D Printers
Double Head Push Button with Signal Lamp
Product Description
Double Head Push Button with Signal Lamp is useful for different kinds of industrial installations. Widely used for control of electronic and/or magnetic starter, contactor and relay, or other similar circuit. Can be used in mount panels, stations, machines and consoles of textile equipment and operating rooms or distribution boxes for ships, airplanes or cities