1.75mm PLA 3D Printer Filament Gold Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
1.75mm PLA 3D Printer Filament Translucent Blue Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
1.75mm Wood PLA 3D Printer Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
1.8″ TFT DISPLAY FOR ARDUINO
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
- 18-bit (262,144) colour
- 4 or 5 wire SPI digital interface
- Built-in microSD slot – uses 2 more digital lines5V compatible!
- Use with 3.3V or 5V logic
- On-board 3.3V @ 150mA LDO regulator
- 2 white LED backlight, a transistor connected so you can PWM dim the backlight
- 1×10 header for easy breadboarding
- 4 x 0.9″/2mm mounting holes in corners
- Overall dimensions: 34 x 56 x 6.5mm
- Current draw is based on LED backlight usage: with full backlight draw is ~50mA
1/4 CMOS 640*480 USB Camera with Collapsible cable for Raspberry Pi
• Interface: USB 2.0
• Sensor: 1/4 Cmos
• Operating Current: <120 mA
• Picture Format: VGA
• Resolution: 640X480
• Supports 300k pixels, a maximum resolution of 640×480, and VGA/ YUY2 packed formats
• Dimension: 40mm × 15mm × 30mm; designed for Raspberry Pi and PC
• With a retractable USB cable, convenient to store
• Applies USB 2.0 High-speed Sensor, plug-and-play, no driver installation
• High definition and true colour images.
• max pixels: 12m pixels
1/4W 5% Assorted Value Carbon Film Resistor Assortment Kit Set pack electronic diy kit
- 100% brand new and high quality.
- Fine workmanship and long service life.
- 1/4W carbon film resistor package.
- High precision and stability.
- Easy to use.
- Precision: 5%
- Error: 5%
- Values
- 10Ω, 15Ω, 22Ω, 33Ω, 47Ω, 68Ω, 100Ω, 220Ω, 330Ω, 470Ω, 1k, 1k5, 2k2, 3k3, 4k7, 5k6, 6K8, 8K2, 10K, 15K, 22K, 33K, 47K, 56K, 68K, 100K, 150K, 220K, 330K, 470K
- Package included: 150pcs
10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor + Controller
- Motor type: 10-inch brushless toothless hub wheel motor+ Controller
- Rated Power: 350w.
- Rated Voltage: 24v.
- Speed: 800 RPM. (400-1000 RPM).
- Speed: 12-28km/h.
- Diameter: 254mm with tire.
- Open File: 95mm.
- Motor Weight: 4.5 kg.
- Load bearing capacity: 80-150 KG.
- Rim Size: 10 inch.
- Certification: CE, CCC, ROHS.
- Motor Efficiency :> 83%.
- Weight: 4.5 kg.
- Load Weight: 80-150 KG.
- Application: electric scooter, folding electric car, ebike,e-motorcycle,ebike ,front/rear drive
10 Inch Spun Filter
10 MHz 2 Pin Oscillator Crystal
10 Pieces Diamond Burr Bits Drill Kit for Engraving Carving Rotary Tool Set
- High-quality diamond-coated bur set with 3.1mm shanks
- Suitable for the hanging mill, electric mill, engraving machines, electric machinery
- Can Carve wood, plastic and other soft materials
- Can be used to various applications including carving, grinding and etching on a variety materials
- Perfect For All Sorts Off Jobs Like Model Making,
- Compatible With Other Multi-Tool Machines
- Supporting assembly mainly used to polish glass, jade, repair abrasive and other hard objects electroplated diamond grinding
- 10 pieces assortment of various shapes and sizes bits
- Come in different sizes and coarseness to satisfy any technology fit most professional electric drills,
- Best for replacing nail drill bits can be used to various applications
- High efficiency, high-quality finish, long service life, good economic returns.
- Easy to use, safe and reliable, can reduce labor intensity.
- length: approx. 6cm
- Materials: HSS
