Thread Extruder Nozzle For 3D Printer (0.3mm)
0.5mm 3D Printer Extruder Brass Nozzle
145mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
- Rod Size: 8X145mm
- Lead (the straight distance which turn a circle): 8mm
- Nut Diameter: 8 mm.
- Color: silver and gold
- Material: Stainless steel and brass
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
- Fine producing and practical.
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Creality CR-5 Pro 3D Printer with bl touch and silent motherboard 500w meanwell
• Print Size: 300*225*380mm
• Machine Size: 530*487*612mm
• Package Szie: 625*547*710mm
• Filament diameter: 1.75 mm PLA/ABS
• File Format: STL/OBJ/AMF
• Layer Heigh: 0.1-0.4mm
• Sicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
• Connectivity: Online/SD card
• Mainboard: ATmega2560 Silent board
• UI interface: 4.3inch touch screen
Creality ender 5 plus print large build volume ender 5 plus 3d printer with bl touch color
- Â Print Size: 300*225*380mm
- Machine Size: 530*487*612mm
-  Package Szie: 625*547*710mm
- Filament diameter: 1.75 mm PLA/ABS
- File Format: STL/OBJ/AMF
- Â Layer Heigh: 0.1-0.4mm
- Slicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
- Â Connectivity: Online/SD card
- Mainboard: ATmega2560 Silent board
- UI interface: 4.3inch touch screen
100K ohm NTC 3950 Thermistor/Temperature Sensor for Reprap 3D printer Extruder
- High-temperature Teflon wire temperature: 200 degrees
- Nominal resistance R25 (25 ℃): 100k
- Resistance accuracy: ± 1%
- B value R25 / 50: 3950k
- B value accuracy: ± 1%
- Operating temperature range: -40 ℃ ~ +300 ℃
- Dissipation power factor: ≥ 5 mW / ℃ (static air)
- Thermal time constant: ≤ 7S (static air)
- Maximum rated power: 45mW
- Wiring length: 1 meter
- Material: glass glaze film
12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers
- Material: stainless steel,
- Core: ceramic.
- Voltage: 12V.
- Power: 40W.
- Diameter: 6mm, Heating Length: 20 mm.
- Wire Length: 100 cm.
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
Lead Copper Nut 8mm
24V 40W Ceramic Cartridge Heater Wire For 3D Printer
- Voltage: 24V, Power: 40W
- Material: 304 Stainless Steel
- Wire Length :1M
- Diameter: 6mm
- Length: 20 mm
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor
GT2 Open Timing Belt for 3D Printer and CNC
MOQ: 1 m
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 10M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect
- Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
PR53 215mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
8mm Bore Inner Ball Mounted Pillow Block
CNC Shield V4 for Engraving Machine 3D Printers Controller Board
- Worked with Arduino nano.
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
- Released the I2C interface, you can connect to the LCD I2C or another I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible
Ramps 1.6 For 3D Printer Parts
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
- Design of Pololu plate pin socket can be easily replaced or removed for future design.
- I2C and SPI pins are available for future expansion.
- Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
- LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendel.
- Dimension: 101.5 * 60.5mm
T8 Trapezoidal Lead Screw 8MM Thread 2MM Pitch 300MM Length with Brass Nut
145 mm Trapezoidal Lead Screw
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
Black PLA 1.75 mm 1 Kg Filament For 3D Printer Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
1.75mm HIPS 3D Printer Filament Black Wanhao
- Colour: Black
- Diameter: 1.75mm
- Material: HIPS
- Print Temperature(Degree Celsius): 230 - 270 Deg C
- Melting Temp: 230 - 270 Deg C
- Highly Detailed & Quality Outputs
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- HIPS is stronger than PLA High Impact Polystyrene
- 1kg spools on black reel
- Highly Detailed & Quality Outputs. Every time.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- HIPS is stronger than PLA
- Easy to post-process.
1.75mm PLA 3D Printer Filament Black Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
ABS 1.75 mm 1 kg Filament for 3d printer, Dark Blue Wanhao
- Material: ABS
- Color: Dark Blue Color ABS.
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Mounted: Spool Mounted
- Net weight: 1kg
- Diameter Accuracy: 1.75mm
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Melt Point: 210°C 220°C
- Outer Diameter: 200 mm
- Hub Diameter: 32 mm
- Packaging Vacuum-sealed with desiccant to protect filament from humidity
- Extrusion Speed Tested up to 200mm/s
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
1.75mm PLA 3D Printer Filament Translucent Blue Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
1.75mm PLA 3D Printer Filament Brown Wanhao
- Material: PLA
- Diameter: 1.75 mm
- 3D Printing Material
- Suitable for printing artworks and crafts
- PLA Filament
- Easy to move the supporting material
- Transparent colour, Eco-friendly
- Diameter Accuracy: 1.75mm
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Melt Point: 210°C 220°C
- Outer Diameter : 200 mm Hub Diameter : 32 mm
- Packaging Vacuum-sealed with desiccant to protect filament from humidity
- Extrusion Speed Tested up to 200mm/s
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
1.75 mm 1 KG ABS Filament for 3D printer Fluorescent Green
- Material: ABS, 1.75 mm diameter
- Weight: 1 kg/spool (2.2 lbs)
- Length: approx. 400 m
- Density at 21.5 °C: 1.01 g/cm3
- Melt Flow Index at 10min, 2.16kg: 5
- Melt Point: 225 – 240 °C
- Heat-Deflection-Temperature at 0.455 MPa: 85 °C
- Yield Strength at 5mm/min: 45 MPa
- Impact Strength: 16 KJ/m2
- Ensile Break: 30 %
- Diameter: 1.75 ± 0.05 mm
- Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
PLA 1.75 mm 1 kg Filament for 3D Printer, Gold Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
1.75mm PLA 3D Printer Filament Gold Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
GREY BLUE ABS 1.75 MM 1 KG FILAMENT FOR 3D PRINTER WANHAO
- Material: ABS
- Color: Grey Blue ABS
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Mounted: Spool Mounted Material Weight : 1 kg (2.2 lbs)
- Diameter : 1.75 mm
- Roundness Accuracy: +/- 0.05 mm
- Density: 1.31 g/cc. - 1.01 g/cc
- Melting Point : 210°C to 260°C
- Package Size : 210 mm x 210 mm x 75 m
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Light Blue HIPS 1.75 mm 1 KG Filament Wanhao
- Colour: Light Blue
- Diameter: 1.75mm
- Material: HIPS
- Print Temperature(Degree Celsius): 230 - 270 Deg C
- Melting Temp: 230 - 270 Deg C
- Highly Detailed & Quality Outputs
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- HIPS is stronger than PLA High Impact Polystyrene
- 1kg spools on black reel
- Highly Detailed & Quality Outputs. Every time.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- HIPS is stronger than PLA
- Easy to post-process.
Wanhao filament 1.75 mm Glow in the Dark Luminous Green
- Material: PLA
- Filament Diameter: 1.75mm
- Filament Weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Melt Flow Index (g/10min): 2(190C/2.16kg)
- Dimensional Accuracy (mm): 1.75 +/- 0.02 mm
- Roundness Accuracy (mm): +/- 0.5mm
- Nozzle Temperature: 190C – 220 degrees C
- Bed Temperature: 40C – 100 degree C
- Printing Speed-: 30~100mm/s
- Movement Speed: 90~150mm/s
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- High quality means less waste
- Easy to use
- Environment friendly - ISO 9001 and ROHS certified
Luminous White ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Luminous White Color ABS.
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Nuclear Green PLA 1.75 mm 1 KG Filament-Wanhao
- Material: PLA
- Filament Diameter: 1.75mm
- Filament Weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Melt Flow Index (g/10min): 2(190C/2.16kg)
- Dimensional Accuracy (mm): 1.75 +/- 0.02 mm
- Roundness Accuracy (mm): +/- 0.5mm
- Nozzle Temperature: 190C – 220 degree C
- Bed Temperature: 40C – 100 degree C
- Printing Speed-: 30~100mm/s
- Movement Speed: 90~150mm/s
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- High quality means less waste
- Easy to use
- Environment friendly - ISO 9001 and ROHS certified