HT12D Decoder IC
CD4033BE CMOS Decade Counter Divider IC
74LS93 4-Bit Binary Counter IC
- 4-Bit Binary Counter
- Supply Voltage Range: 4.75V to 5.25V
- Supply Current Max.: 15mA
- Clock Frequency Max.: 32MHz
- HIGH Level Input Voltage Min.: 2V
- LOW Level Input Voltage Max.: 0.8V
- HIGH Level Output Voltage Min.: 2.7V
- LOW Level Output Voltage Max.: 0.5V
- High level Output Current Max.: -0.4mA
- Low level Output Current Max.: 8mA
- Input Clamp Voltage Max.: -1.5V
- Propagation Delay Time Max.: 16ns
- Package: DIP-14
TNY264PN Off-line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 400mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 32Ω
- Package: DIP-8B
- Fully integrated auto-restart for short circuit and open loop fault protection – saves external component costs
- Frequency jittering dramatically reduces EMI (~10 dB) – minimizes EMI filter component costs
- Lowest component count switcher solution
LM1267 RGB Video Amplifier IC
- 150 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
- Programmable 110 MHz to 150 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0˚C to 70˚C
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150˚C ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265˚C
- Thermal Resistance to Ambient (θJA) 51˚C/W
DMO565R Power Switch IC
TNY177PN Off-line Switcher IC
- Drain Voltage: -0.3 to 650V
- Drain Peak Current: 880mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 9Ω
- Package: DIP-8C
- Energy Efficient, Offline Switcher with Enhanced Flexibility and Extended Power Range
- 650 V rating optimized for non-active PFC applications
- Simple ON/OFF control, no loop compensation needed
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
Motor Driver IC – L293D
- Can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(vss): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
- Featuring Unit rode L293 and L293D
- Wide Supply-Voltage Range: 4.5 V to 36 V
- Separate Input-Logic Supply
- Internal ESD Protection
- Thermal Shutdown
- High-Noise-Immunity Inputs
- Output Current 1 A Per Channel (600 mA for L293D)
- Peak Output Current 2 A Per Channel (1.2 A for L293D)
- Output Clamp Diodes for Inductive Transient Suppression
IC PT2314 SMD
- 4 stereo inputs with gain selection, range from 0dB to +11.25dB in 3.75dB/step
- Master volume from 0 dB to -78.75dB in 1.25dB/step
- Speaker attenuator for balance, range from 0dB to -38.75dB in 1.25dB/step
- Each channel output can be muted individually.
- Low frequency loudness compensation
- Bass and Treble control, range from -14dB to +14dB in 2dB/step
- Wide operation range (VDD=4V to 10V)
- Low harmonic distortion, low noise
- Improved and replace PT2314 and PT2314A
TNY268PN Off-line Switcher IC
80C52 Microcontroller IC
- Internal Memory
- ROM:8K x 8-bits
- RAM:256 x 8-bits
- External Memory Addressing
- Up to 64K Program Memory Space
- Up to 64K Data Memory Space
- Timer
- Two 16-bit Timer/Counters
- Interrupt Source
- Six Interrupt Sources
- Two-Level Interrupt priority
- Boolean Processor(Single-bit Logic)
- Full Duplex UART
- I/O ports
- Four 8-bit Ports
- Two Types of Power Saving Mode
- Idle Mode
- Power Down Mode
- Operating Volage:5V
- Operating Frequency:12MHz
- Package Type
- 40-pin PDIP
- Programmable clock out
- Asynchronous port reset
- Low EMI (inhibit ALE and slew rate controlled outputs)
- Wake-up from Power Down by an external interrupt
- CMOS and TTL compatible
- 4 level priority interrupt
- Memory addressing capability – 64k ROM and 64k RAM
