74279N Quadruple S-R Latch IC
TNY254PN Off-line Switcher IC
- Drain Voltage:Â -0.3 to 700V
- Drain Peak Current: 400mA
- ENABLE Voltage:Â -0.3 to 9V
- ENABLE Current:Â 100mA
- ON State Resistance (max): 36Ω
- Package: DIP-8
- Energy Efficient, Low Power Off-line Switcher
- Cost effective replacement for bulky linear adapters
- Simple ON/OFF control, no loop compensation needed
TNY266PN Off-line Switcher IC
CM8870 ISO2 CMOS Integrated DTMF Receiver IC
74LS25 Dual 4-Input NOR Gate IC
- Dual 4-Input NOR Gates With Strobe
- High-level input voltage:Â 2V
- Low-level input voltage:Â 0.8V
- High-level output current:Â -0.8mA
- Low-level output current:Â 16mA
- No. of gates:Â 2
- No. of inputs:Â 4
- No. of outputs:Â 1
- Propagation delay time:Â 22ns
- Package:Â DIP-14
- Output type: Push-Pull
- Max Speed: (tpd 10-50ns)
- Max Data rate: 70Mbps
- Rating: Catalog
- Operating temperature range: 0°C to 70°C
LM4250 Programmable Operational Amplifier IC
- Input Offset Voltage (max): 6mV
- Input Offset Current (max): 20nA
- Input Bias Current (max): 75nA
- Operating temperature (max): 700C
- Output Current (max): 0.1mA
- CMRR (min): 70dB
- Programmable Operational Amplifier
- ±1V to ±18V power supply operation
- 3 nA input offset current
- Standby power consumption as low as 500 nW
- No frequency compensation required
LM3915 Dot or Bar Display Driver IC
- Dot/Bar Display Driver
- 3 dB/step, 30 dB range
- Drives LEDs, LCDs, or vacuum fluorescents
- Bar or dot display mode externally selectable by user
- Expandable to displays of 90 dB
- Internal voltage reference from 1.2V to 12V
- Operates with single supply of 3V to 25V
- Inputs operate down to ground
- Output current programmable from 1 mA to 30 mA
- Input withstands ±35V without damage or false outputs
- Outputs are current regulated, open collectors
- Directly drives TTL or CMOS
- The internal 10-step divider is floating and can be referenced to a wide range of voltages
LM382N Dual Preamplifier IC
IL91214A Pulse Dialer with Flash Function
ILA1062A
- Line Voltage : 3.55 to 4.25V
- Internal Supply Current : 1.35mA
- Low d.c. line voltage; operates down to 1.6V (excluding polarity guard).
- Voltage regulator with adjustment static resistance.
- Provides supply with limited current for external circuitry.
- Symmetrical high-impedance inputs (64k Ω) for dynamic, magnetic or piezoelectric microphones.
- Asymmetrical high-impedance inputs (32k Ω) for electret microphones
