PT2258 6-Channel Electronic Volume Controller IC
TNY267PN Off-line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 720mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 9Ω
- Package: DIP-8B
- Fully integrated auto-restart for short circuit and open loop fault protection – saves external component costs
- Frequency jittering dramatically reduces EMI (~10 dB) – minimizes EMI filter component costs
- Lowest component count switcher solution
89S51 Atmel Microcontroller IC
- Core Processor: 8051
- Data Bus Width: 8 bit
- Maximum Clock Frequency: 33 MHz
- Program Memory Size: 4 KB
- Program Memory Type: Flash
- RAM Size: 128 B
- ADC: No
- Number of Programmable I/Os: 32
- Number of Timers: 2
- Supply Voltage Range: 4 V to 5.5 V
- Package: PDIP
- 4K Bytes of In-System Programmable (ISP) Flash Memory – Endurance: 1000 Write/Erase Cycles
- 0V to 5.5V Operating Range
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 128 x 8-bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-bit Timer/Counters
- Six Interrupt Sources
- Full Duplex UART Serial Channel
- Low-power Idle and Power-down Modes
- Interrupt Recovery from Power-down Mode
- Watchdog Timer
- Dual Data Pointer
- Power-off Flag
- Fast Programming Time
- Flexible ISP Programming (Byte and Page Mode
LM3900 Quadruple Norton Operational Amplifier IC
- Wide single supply voltage: 4 VDC to 32 VDC Range or dual supplies: ±2 VDC to ±16 VDC
- Supply current drain independent of supply voltage
- Low input biasing current: 30 nA
- High open-loop gain: 70 dB
- Wide bandwidth: 2.5 MHz (unity gain)
- Large output voltage swing: (V+ − 1) Vp-p n Internally frequency compensated for unity gain
- Output short-circuit protection
- Quadruple Norton Operational Amplifier
- Input Bias Current (max): 200nA
- Operating temperature (max): 700C
- Output Current (max): 10mA
- Package: PDIP
PIC12F508 Microcontroller IC
- Maximum CPU Frequency: 4 MHz
- Architecture: 8 bit
- Program Memory (Flash): 0.75kb
- RAM: 25 byte
- Internal Oscillator: 4 MHz
- of Pins: 8
- Voltage: 2V - 5.5V
- 4 MHz Precision Internal Oscillator: - Factory calibrated to ±1%
- In-Circuit Serial Programming™ (ICSP™) •
- In-Circuit Debugging (ICD) Support
- Power-On Reset (POR)
- Device Reset Timer (DRT) •
- Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation
- Programmable Code Protection
- Multiplexed MCLR Input Pin
- Internal Weak Pull-Ups on I/O Pins
- Power-Saving Sleep mode
- Wake-Wp from Sleep on Pin Change
- Selectable Oscillator Options:
- Operating Current: - < 175 μA @ 2V, 4 MHz, typical
- Standby Current: - 100 nA @ 2V, typical
- Low-Power, High-Speed Flash Technology: - 100,000 Flash endurance - > 40 year retention
- Fully Static Design
- Wide Operating Voltage Range: 2.0V to 5.5V
- Wide Temperature Range:
PCF8583 IC
- I2C-bus interface operating supply voltage: 2.5 V to 6 V
- Clock operating supply voltage 1.0 V to 6.0 V at 0 Cto+70C
- 240 8-bit low-voltage RAM
- Data retention voltage: 1.0 V to 6.0 V
- Operating current (at fSCL = 0 Hz): max 50 μA
- Clock function with four year calendar
- Universal timer with alarm and overflow indication
- 24 hour or 12 hour format
- 32.768 kHz or 50 Hz time base
- Serial input and output bus (I2C-bus)
- Automatic word address incrementing
- Programmable alarm, timer, and interrupt function
- Slave addresses: A1h or A3h for reading, A0h or A2h for writing
LM338T 5-Amp Adjustable Regulator IC
TNY176PN Off-line Switcher IC
- Drain Voltage: -0.3 to 650V
- Drain Peak Current: 720mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 16Ω
- Energy Efficient, Offline Switcher with Enhanced Flexibility and Extended Power Range
- 650 V rating optimized for non-active PFC applications
- Simple ON/OFF control, no loop compensation needed
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
- Package: DIP-8C
TNY279PN Off-line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 1200mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 4.5Ω
- Simple ON/OFF control, no loop compensation needed
- ON-time extension – extends low line regulation range/hold-up time to reduce input bulk capacitance
- Frequency jittering reduces EMI filter costs
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
- Package: DIP-8B
L293D Push-Pull Four Channel Driver IC
- Push-Pull Four Channel Driver with Diodes
- 600mA Output Current Capability Per Channel
- 1.2A Peak Output Current (Non Repetitive) Per Channel
- Over Temperature Protection
- Internal Clamp Diodes
- Supply Voltage: 36V
- Enable Voltage: 7V
- Peak Output Current: 1.2A
- Total Power Dissipation: 4W
- Output Current: 600mA
- Package: DIP-16
