KA3525 SMPS Controller IC
L293D Push-Pull Four Channel Driver IC
- Push-Pull Four Channel Driver with Diodes
- 600mA Output Current Capability Per Channel
- 1.2A Peak Output Current (Non Repetitive) Per Channel
- Over Temperature Protection
- Internal Clamp Diodes
- Supply Voltage:Â 36V
- Enable Voltage:Â 7V
- Peak Output Current:Â 1.2A
- Total Power Dissipation:Â 4W
- Output Current:Â 600mA
- Package:Â DIP-16
L297 Stepper Motor Controller IC
L298N Dual Full-Bridge Driver IC
- Dual full-bridge driver
- Operating Supply Voltage up to 46V
- Total DC Current up to 4A
- Low Saturation Voltage
- Over Temperature Protection
- Logical "0" Input Voltage up to 1.5V (High Noise Immunity)
- Power Supply:Â 50V
- Logic Supply Voltage:Â 7V
- Input and Enable Voltage:Â -0.3 to 7V
- Non Repetitive Peak Output Current:Â 3A
- Total Power Dissipation: 25w
L6565 Quasi-Resonant SMPS
LF353 JFET Input Dual Operational Amplifier IC
LF356 JFET Input Operational Amplifier IC
LM1207N RGB Video Amplifier IC
- Supply Voltage (VCC) 10.8V s VCC s 13.2V
- Supply Voltage (VCC) 15V
- Peak Video Output Source Current 28 mA
- Â Power Dissipation (PD) Â 2.5W
- Temperature Range b20 degree C to 80 degree C
- RGB Video Amplifier System with Blanking
- Matched (±0.1 dB or 1.2%) attenuators for contrast control
- Three externally gated single ended input comparators for cutoff and brightness control
- 0V to 4V, high input impedance DC contrast control (>40 dB range)
- 0V to 4V, high input impedance DC drive control for each video amplifier (-6 dB to 0 dB range)
- Spot killer, blanks output when VCC <10.6V
- Capable of 7 VPPÂ output swing (slight reduction in bandwidth)
- Output stage blanking
- Output stage directly drives most hybrid or discrete CRT drivers
LM124J Quad Operational Amplifier IC
- Internally Frequency Compensated for Unity Gain
- Large DC Voltage Gain 100 dB
- Â Wide Bandwidth (Unity Gain) 1 MHz (Temperature Compensated)
- Wide Power Supply Range: – Single Supply 3 V to 32 V – or Dual Supplies ±1.5 V to ±16 V
- Very Low Supply Current Drain (700 μA) —Essentially Independent of Supply Voltage
- Low Input Biasing Current 45 nA (Temperature Compensated)
- Low Input Offset Voltage 2 mV and Offset Current: 5 nA
- Input Common-Mode Voltage Range Includes Ground
- Differential Input Voltage Range Equal to the Power Supply Voltage
- Large Output Voltage Swing 0 V to V + − 1.5 V
- Low Power Quad Operational Amplifier
- Input Offset Voltage (max):Â 5mV
- Input Offset Current (max):Â 30nA
- Input Bias Current (max):Â 150nA
- Operating temperature (max): 1250C
- Output Current (max):Â 2mA
- CMRR (min):Â 70dB
LM1267 RGB Video Amplifier IC
- 150 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
- Programmable 110 MHz to 150 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0ËšC to 70ËšC
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150ËšC ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265ËšC
- Thermal Resistance to Ambient (θJA) 51˚C/W
LM1269 RGB Video Amplifier IC
- 110 MHz I2C Compatible RGB Video Amplifier System with OSD & DACs
- 110 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0ËšC to 70ËšC
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150ËšC
- ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265ËšC
LM1458 Dual Operational Amplifier IC
- High Performance Dual Operational Amplifier
- Differential Input Voltage: ±30V
- Input Offset Voltage Max:Â 6mV
- Input Offset Current Max:Â 200nA
- Input Bias Current Max:Â 500nA
- Common-Mode Rejection Ratio:Â 90dB
- Max. Power Dissipation:Â 500mW
- Output Resistance: 75Ω
- Rise Time: 0.3µs
- No Frequency Compensation Required
- Low-Power Consumption
- Short-Circuit Protection
- Wide Common-Mode and Differential Voltage
- No Latch Up When Input Common Mode Ranges Range is Exceeded
- Package:Â DIP-8