Mini Disc Vibrating Motor

₹75.00 inc. GST
  • Fully consealed, you does not have access to motor shaft
  • vibration motor
  • Dimension: 10mm diameter, 2.7mm thick
  • Voltage: 2V - 5V
  • 5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
  • 11000 RPM at 5V
  • Weight: 0.9 gram

Generator Motor Big

₹90.00 inc. GST
A motor-generator is a device that converts electrical energy into a different form. Frequency, voltage, and phase of electricity are

Generator Motor Small

₹90.00 inc. GST
A motor-generator is a device that converts electrical energy into a different form. Frequency, voltage, and phase of electricity are

DC Toy Motor

₹45.00 inc. GST
  • Operating Voltage: 3 to 6VDC
  • Shaft Diameter: 2 mm
  • Shaft Length: 10mm
  • Motor type: DC Toy Motor
  • Terminal: 2
  • The direction of working: Both clock and anticlockwise
  • Material: metal
  • Weight: 17 g
  • Dimension: 27.5 x 20 x 15mm

ESC 30A BLDC Electronic Speed Controller

₹650.00 inc. GST
  • Standard 30A BLDC ESC Electronic speed controller
  • Input voltage: DC 6V-16.8V(2-4S Lixx)
  • BEC: 5V 2amp
  • Easy handling and good compatibility
  • Suitable Batteries: 2-3S LiPo.
  • Application: BLDC Motors, Multirotor, RC Planes et
  • Running current: 30A (Output: Continuous 30A, Burst 40A up to 10 Secs.)
  • Size: 36* 26* 7mm
  • Weight: 32g

Bullet Connector 3.17mm

₹110.00 inc. GST
  • High-quality lightweight aluminum material
  • Suitable for RC brushless motors on planes, quadcopters, and multirotor
  • Ease of interfacing.
  • Rust-free and stain-free aluminum metal construction.

STEPPER MOTOR MINI

₹110.00 inc. GST
  • This is a high quality medium torque stepper motor.
  • Its compact size enables it to be mounted in tight spaces.
  • It has two holes for easy mounting.
  • It has a step angle of 7.5 degrees and comes with a compatible wire connector.

STEPPER MOTOR NEMA 23 7.2KG

₹1,500.00 inc. GST
  • Step Angle Step Angle: 1.8 °
  • Current: 1 A/Phase
  • Holding Torque: 72 N-cm
  • Detent torque: 3.6 N.cm (Maximum)
  • Lead Wires: 6
  • Shaft diameter: 6.35 mm (both sides)

DC 12V WATER PUMP BLACK

₹650.00 inc. GST
  • Operating Voltage : 12V
  • high-pressure output
  • used as 

SERVO MOTOR MG 995- 360 Degree

₹350.00 inc. GST
  • Servo type: Analog Servo
  • Operation Voltage : 4.8 – 7.2Volts
  • Gear Type: All Metal Gears
  • Operating temperature: -30 ~ + 60 °
  • Dead band setting: 4 microseconds
  • Rotation angle: 360°
  • Torque: 4.8V: 130.5 oz-in (9.40 kg-cm),
-6.0V: 152.8 oz-in (11.00 kg-cm)
  • Speed: 4.8V: 0.20 sec/60°, 6.0V: 0.16 sec/60°
  • Stable and shockproof double ball bearing design
  • Connection cable is thicker.
  • Equips high-quality motor.
  • High resolution
  • Accurate positioning
  • Fast control response
  • Constant torque throughout the servo travel range
  • Excellent holding power
  • Weight: 55g
  • Dimension : 40.7 × 19.7 × 42.9 mm

SERVO MOTOR SG9G

₹175.00 inc. GST
  • 3 pole ferrite, all nylon gear
  • Top ball bearing
  • Operating Voltage: 4.8V~6.0V
  • Operating speed: 0.12sec/60 degree
  • Output torque: 1.6kg/cm  4.8V
  • Dimension: 21.5 x 11.8 x 22.7mm
  • Weight: 9g

MOTOR MOUNT BRACKET for N20 MOTOR

₹50.00 inc. GST
  • Material: High ABS quality plastic
  • Height: 11mm
  • Width: 25mm