DYS Motor D2826 1400KV
- Item name: D2826 1400KV
- Voltage: 4V~14.8V
- Battery: 2~4s LiPoly
- Max watt:205W
- Max Current: 19A
- Suggested prop: 9045
- Pull: 660g
- Shaft: 3.17mm in Diameter
- Thrust: 1050g (9045 prop/4s)
- Efficiency: <4g/W
- Suggested Propeller: 7x4(3S) ~ 9x4.7 (2S)
- ESC: 40A
- Ri(M ): 0.078
- Pull: 780g
- Shaft: M5
- Motor Mount Holes: 16mm or 19mm
- Dimensions: 26.2 × 27.7mm
- Weight: 51g
DYS Motor D2826 1800KV
- Item name: D2826 1800KV
- Voltage: 4V~14.8V
- Battery: 2~4s LiPoly
- Max watt:300W
- Max Current: 19A
- Suggested prop: 9045
- Pull: 800g
- Shaft: 3.17mm in Diameter
- Thrust: 1050g (9045 prop/4s)
- Efficiency: <4g/W
- Suggested Propeller: 7x4(3S) ~ 9x4.7 (2S)
- ESC: 40A
- Ri(M ): 0.078
- Pull: 780g
- Shaft: M5
- Motor Mount Holes: 16mm or 19mm
- Dimensions: 26.2 × 27.7mm
- Weight: 51g
RS-50-555 Gear Motor High Torque 30 rpm 12v DC
- Operating Voltage Range: 6V to 15V DC
- Recommended Voltage: 12V DC
- Rated RPM: 10 (at 12V)
- Rated Torque: 26 Kg-cm
- No- Load Current: 0.2 A
- Full Load Current: 4.8 A
- Full (Stall) Load Torque: 80Kg-cm
- Motor Dimensions: 38.2 x 65.8 mm
- Gearbox Dimensions: 51.2 x 34mm
- Motor Shaft Length: 21.18 mm
- Shaft Diameter: 7.15mm
- Motor Shaft Type: D
- Weight: 300 gm
Worm Gear Box Reduction Motor 12V 10rpm 10 kg-cm Torque – WGM370128500-828K
Worm Gear Box Reduction Motor 12V 85rpm 6 kg-cm Torque – WGM370128500-100K
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio:100: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.220A
- Rated Base Motor RPM: 8500.
- Rated Speed: 85RPM
- Rated Torque: 6kg-cm
- Operating Temperature: (°C) - -40 °C ～ +100°C.
- Relative Humidity(RH): 20% ～ 85% .
- Housing Material: Metal.
- Shaft Type: D-type.
- Motor Height: 25mm
- Motor Width: 32mm.
- Motor Length: 81mm
- Shaft Diameter: 6mm
- Shaft Length: 13mm
- Shaft Type: D-type. Motor
- Weight(gm): 170.
Worm Gear Box Reduction Motor 12V 88rpm 30 kg-cm Torque – WGM555126000-68K
Worm Gear Box Reduction Motor 12V 175rpm 30 kg-cm Torque – WGM5551212000-68K
Worm Gear Box Reduction Motor 12V 110rpm 30 kg-cm Torque – WGM555127500-68K
- Operating Voltage: 12.V DC
- Rated Current: 1.1 A
- Rated Base Motor RPM: 7500.
- Rated Speed: 110RPM
- Rated Torque: 30kg-cm
- Operating Temperature: (°C) - -40 °C ～ +100°C.
- Relative Humidity(RH): 20% ～ 85% .
- Housing Material: Metal.
- Shaft Type: D-type.
- Motor Height: 27mm
- Motor Width: 40mm.
- Motor Length: 115mm
- Shaft Diameter: 8mm
- Shaft Length: 15mm
- Shaft Type: D-type. Motor
Worm Gear Box Reduction Motor 12V 350rpm 22 kg-cm Torque – WGM5551212000-34K
Worm Gear Box Reduction Motor 12V 11rpm 150 kg-cm Torque – WGM775126000-548K
- Product Name: Worm Gear Motor
- Rated Voltage: DC 12V
- No-load Speed: 15RPM
- Rated Speed: 11RPM
- Rated Current: 15A
- Rated Torque: 150KG.cm
- Output Power: 90W
- Reduce Ratio: 1:80
- Shaft Bore Diameter: 14mm
- Dimension:255*96*115 mm
- Commutation: Brush
- Reversible: Yes
- Lifespan: more than 2000 hours
- Net Weight: 3.98KG
Worm Gear Box Reduction Motor 12V 94rpm 90 kg-cm Torque – WGM775127500-80K
Worm Gear Box Reduction Motor 12V 190rpm 90 kg-cm Torque – WGM775127500-40K
- Product Name: Worm Gear Motor
- Rated Voltage: DC 12V
- No-load Speed: 15RPM
- Rated Speed: 190RPM
- Rated Current: 15A
- Rated Torque: 90KG.cm
- Output Power: 90W
- Reduce Ratio: 1:80
- Shaft Bore Diameter: 14mm
- Dimension:255*96*115 mm
- Commutation: Brush
- Reversible: Yes
- Lifespan: more than 2000 hours
- Net Weight: 3.98KG
MARSPOWER MX1806 2280KV BLDC Motor
- VK: 2280
- Max thrust: 460g
- No of cells: 2-3S
- Framework: 12N14P
- Suitable Propeller: 5-6”
- Shaft: 2mm
- Minimum ESC Specification: 12A Suggested
- Durable with high quality
- The 0.2mm core to lower load temperature and increase efficiency
- Range of use for DJI F330 ZMR250 H250
- Do every single motor balancing test
- Japan NMB bearings provide low noise and long life
- 2mm spindle selection of Kawasaki, Japan, more efficient, less heat
- NdFeB magnets temperature selection
- MX1806 (positive thread motor)
- FPV all configurations life 7-8 minutes!
- Easy to loosen the nut bombing risk!
- Low centre of gravity design
- Long-endurance design
- Dimension: 26.7*23mm
- Weight: 18gm
59TYD-375-2B AC Synchronous Motor 220VAC 50HZ – 5 RPM
- RPM: 30.
- Torque: 68 kgcm.
- Voltage: 12-240 VAC.
- Input Power: <13W.
- Frequency: 50/60Hz.
- Rated Current: 100mA.
- Noise (dB): 42.
- Insulation Class: B.
- Direction of Rotation: CW OR CCW Controlled by Capacitor. "
- Main Application - beverage machine, blenders, grill, oven, office equipment, household appliances.
- Weight:580g.
RS-50-555 Gear Motor – High Torque 12v DC 300 rpm
- Operating Voltage Range: 6V to 15V DC
- Recommended Voltage: 12V DC
- Rated RPM: 10 (at 12V)
- Rated Torque: 2 Kg-cm
- No- Load Current: 0.2 A
- Full Load Current: 4.8 A
- Full (Stall) Load Torque: 10Kg-cm
- Motor Dimensions: 38.2 x 65.8 mm
- Gearbox Dimensions: 51.2 x 34mm
- Motor Shaft Length: 21.18 mm
- Shaft Diameter: 7.15mm
- Motor Shaft Type: D
- Weight: 300 gm
RS-50 High Torque Side Shaft DC Geared Motor 60 RPM
- Operating Voltage Range: 6V to 15V DC
- Recommended Voltage: 12V DC
- Rated RPM: 10 (at 12V)
- Rated Torque: 13 Kg-cm
- No- Load Current: 0.2 A
- Full Load Current: 4.8 A
- Full (Stall) Load Torque: 40Kg-cm
- Motor Dimensions: 38.2 x 65.8 mm
- Gearbox Dimensions: 51.2 x 34mm
- Motor Shaft Length: 21.18 mm
- Shaft Diameter: 7.15mm
- Motor Shaft Type: D
- Weight: 300 gm
MACH3 interface board
- Compatible Stepper Motor Driver - Max 5 2-phase Microstep controllers
- Driver type - Pulse and Direction signal control
- Wide input voltage range: 12-24V, and with anti-reverse function.
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Maximum support 5-axis stepper motor driver controllers
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Weight - Approx. 75g
- Dimensions - 90 * 70 * 20mm
59TYD-375-2A AC Synchronous Motor 220VAC 50HZ – 1.6, 5, 12, 20, 40. RPM
Stepper Motor Nema 23 kg 7.2 kg Dual shaft
- Rated Voltage: 6.6 V
- Current/ phase: 1A
- Resistance/ phase: 6.6ohms
- Inductance/ phase: 8.2 mH
- Holding Torque: 7.2 kg-cm
- of Leads - 6
- Rotor Inertia - 275
- Weight: 0.65kg
- Detent Torque: 0.36 kg-cm
- Step Angle - 1.8°
- Step Angle Accuracy - ±5% (full step, no load)
- Resistance Accuracy - ±10%
- Inductance Accuracy - ±20%
- Frame Size (mm) - 57x57
- Shaft Length (mm) - 20.6
- Shaft Diameter (mm) - 6.35
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
STEPPER MOTOR NEMA 23 7.2KG
JX PS-5521MG 20KG Large Torque Metal Gear Standrd Analog Servo
- Name: PS-5521MG Analog Servo
- Maximum Angle: 90°
- Gear: Metal
- Operating Voltage:4.8V-6V
- Dead band: 7µs 1520µs / 50hz
- Operating Speed (4.8V): 0.18 sec/60°
- Operating Speed (6V): 0.16 sec/60°
- Stall Torque (4.8V): 17.25 kg.cm (239.55oz/in)
- Stall Torque (6V): 20.32 kg-cm (281.89 oz/in)
- Connector Wire Length: JR 265 mm (10.43in)
- Bearing: 2BB
- Dimension: 40.5x40.3x20mm
- Weight: 85g
BF-555 Gear / Geared Motor 6 RPM – High Torque
BF-555 Gear / Geared Motor 18 RPM – High Torque
BF-555 Gear / Geared Motor 60 RPM – High Torque
Square Gear Motor 500 RPM – High Torque 12v DC
- Rated Voltage - 12v
- RPM - 500 (at 12v)
- Nominal Voltage - 12v
- No- Load Current - 350 mA
- Load Current - 1.3 A
- Stall Current - 6A
- Full (Stall) Load Torque - 15 kgcm
- Heavy Duty Metal Gears.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Weight - 500g Approx
Square Geared Motor 30 RPM – High Torque
- Operating Voltage: 12 V DC
- No Load Current: ≤220 mA
- No load Speed30 RPM (at 12V)
- Full Load Current: ≤1300mA
- Rated Current: ≤4800 mA
- Rated Torque: 80Kg-cm
- Shaft Length: 27mm
- Shaft Diameter: 8mm
- Length:92mm
- Dimension Overall: 70 X 70 (Sq.) X 90 (Length)
- Mounting Holes: M5 threading (60 X 60 Square)
- Weight: 490gm
Square Geared Motor 300 rpm- High Torque
- Power Supply: 12V DC
- RPM: 300
- Rated Torque: 7 kg-cm
- 8mm Dia shaft with M4 thread hole
- Gearbox diameter: 70 mm
- Motor Diameter: 42 mm
- Length without shaft: 106 mm
- Shaft length: 27mm
- Heavy Duty Metal Gears.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Weight: 630gm
Square Geared Motor 60 RPM – High Torque
- Operating Voltage: 12 V DC
- No Load Current: ≤220 mA
- No load Speed: 60 RPM (at 12V)
- Full Load Current: ≤1300mA
- Rated Current: ≤4800 mA
- Rated Torque: 40 Kg-cm
- Shaft Length: 27 mm
- Shaft Diameter: 8 mm
- Length: 92mm
- Dimension Overall: 70 X 70 (Sq.) X 90 (Length)
- Heavy Duty Metal Gears.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
Power HD 1501MG High-Torque Metal Gears Servo 60g/ 17kg-cm
- Motor Type: DC Motor
- Gear Type: Copper
- Stall Torque: 15.5 kg-cm (4.8V); 17.0 kg-cm (6V)
- Operating Speed: 0.16sec/60degree (4.8V); 0.14sec/60degree (6.0V)
- Temperature Range: -20℃ - +60℃
- Working Frequency：1520μs / 50Hz
- Servo Wire Length: 32cm
- Current Draw at idle: 10mA
- No Load Operating Current: 170mA
- Stall Current: 1.2A
- Dimension: 40.7mm X 20.5mm X 39.5mm
- Weight: 63g
5V-12V DC Brushless Motor Driver Board Controller
- Type: Voltage Regulator
- Drive voltage: DC 5-l2V
- Work current: ≤ 1.2A
- Speed range: from 0% to 100%
- Phase inversion Control
- Offers Voltage polarity protection and Overcurrent Protection
- Suitable for hard brushless motor, brushless motor drive and other miniature 3 / 4 wire brushless motor without hall
NEMA 23 10.1 kg-cm
- Operating Voltage : 2.3 Volts
- Step Angle : 1.8°
- Holding Torque : 10.1 kg-cm
- Supply Current (A) : 2.8 Ampere/Phase
- Number of Leads : 4
- Inductance : 2.2 mH/Phase
- Resistance : 0.83 Ohm
- Rotor Inertia : 275 gm-cm2
- Weight (gm) : 650
- Detent Torque (kg-cm) : 0.36
- Frame Size (mm) : 57 x 57
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm) : 6.35
- Shaft Length (mm) : 20.6
- Step Angle Accuracy : ±5%
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
NEMA 23 18.9 kg-cm
- Step Angle : 1.8 °
- Holding Torque : 18.9 kg-cm
- Operating Voltage : 3.2 Volts
- Supply Current (A) : 2.8 A/Phase
- No. of Leads : 4
- Inductance: 3.6 mH/Phase
- Resistance : 1.13 O/Phase
- Rotor Inertia : 480 gm-cm2
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm) : 6.35
- Shaft Length (mm) : 20.6
- Cable Length: 30 CM
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
VNH2SP30 – Monster Moto Shield 30A Mini Stepper Motor Driver
- Driver Model: Monster Moto Shield VNH2SP30
- Operating Voltage: 12V to 16V DC
- Maximum current rating: 30 A
- Continuous Current: 14 A
- Number of Channels: 1
- MOSFET on-resistance: 19 m (per leg)
- Maximum PWM frequency: 20 kHz
- Current sensing available to Arduino analog pin
- Thermal Shutdown
- Under voltage and Overvoltage shutdown.
- Dimensions: 55 x 28 x 12mm
- Weight: 15gm
Stepper Motor NEMA 23 23 kg-cm Hybrid Bipolar
- Phase - 2 phase Bipolar
- Rated Voltage:2.55V
- Current/ phase: 3.5A
- Inductance/ phase: 2.8 mH (20% variance)
- Resistance/ phase: 0.73 Ohms (10% variance)
- Holding Torque: 23 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm
- Shaft Length: 32mm
- Shaft Diameter: 12mm
- They are high torque stepper motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing
- Supreme finish, Smooth surface, Long lasting life
- Can operate in an open loop control system
- High reliability
48v 500W BM1418ZXF Motor Controller
- Rated Voltage: 48 Volt DC.
- Rated Power: 500W.
- Maximum Current: 30 Amps.
- Level Brake: low.
- Current limited: 30A±0.5A.
- Efficiency: ≥83%.
- Consumption: <1.5W.
- Turn The Voltage: 1-4.2V.
- Phase Angle: 120 degrees.
- Includes attachments for motor, accelerator, brake, battery, battery charging, brake light, power lock
“FEETECH FS6535M 33KG High Torque Analog Servo FOR Large Scale Big RC Robot – FS6535M “
- Operating Voltage:4.8-6Volts
- Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
- Stalling current: 3.8 A.
- No-load speed: 0.27±0.03(sec/60°).
- Direction: CCW.
- Operating Angle: 180degree.
- Required Pulse: 500us-2500us.
- Bearing Type: 2BB.
- Gear Type: Metal.
- Motor Type: Carbon.
- Wire length: 25cm.
- Rotation angle (standard) : CW 90±5°.
- Dimension: 65.8x30.4x57.6mm.
- Weight: 199g