DLO165 Power Switch IC
- Power Switch
- Supply Voltage Max.: 20V
- Total Power Dissipation: 1.25W
- Drain-Source Voltage: 650V
- On-State Resistance Max.: 10Ω
- Rise Time : 4ns
- Rise Time: 10ns
- Output Frequency Max.: 55KHz
- Duty Cycle Max.: 83%
- Operating Current Max.: 5mA
- Over Voltage Protection Min.: 18V
- Precision fixed operating frequency (100/67/50kHz)
- Low start-up current (typ. 100µA)
- Pulse by pulse current limiting
- Over-current protection
- Overvoltage protection (Min. 25V)
- Internal thermal shutdown function
- Under voltage lockout
- Internal high voltage sense FET
- Auto-restart mode
DM556 Digital Stepper Motor Driver with Micro Stepping 20 to 50V 5.6A
- Good high-speed performance
- Supply voltage: +50VDC
- Output current from 0.5A to 5.6A
- Pulse input frequency up to 200 kHz
- Extremely cost-effective
- Automatic idle-current reduction
- Self-test and Auto-configuration technology TTL compatible and optically isolated input
- Micro step resolutions programmable, from full-step to 102,400 steps/rev
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Anti-Resonance provides optimum torque and nulls mid-range instability
- Extra-low motor noise offers excellent quietness
- Over-voltage, over-current protection and phase error protection
DMO465R Power Switch IC
DMO565R Power Switch IC
DMV1500SD Dual Diode
- High breakdown voltage capability
- Â Very fast recovery diode
- Low static and peak forward voltage drop for low dissipation
- Insulated version:
- Â Insulated voltage = 2000 VRMS
- Â Capacitance = 7 pF
- Planar technology allowing high quality and best electrical characteristics
- Outstanding performance of well proven DTV as damper and new faster Turbo 2 600V technology as modulation
- Junction to case thermal resistance Rth(j-c): 4°C/W
- Storage temperature range Tstg: -40 to +150°C
- Maximum operating junction temperature Tj: 150°C
DMV32 Dual Diode
DPM7109 12-Bit µP Compatible ADC IC
- 12-Bit µp - Compatible Analog-To-Digital Converter
- Supply Current Max.: 1500µA
- High Level Output Voltage Min.: 3.5V
- Low level Output Voltage Max.: 0.4V
- High Level Input Voltage Min.: 2.5V
- Low level Input Voltage Max.: 1V
- Analog Input Voltage: +6.2 to -9V
- Power Dissipation: 1.23W
- Input Common-Mode Rejection Ratio: 50µV/V
- Low Noise: 15µVpp
- Package: DIP-40
DRV8825 Stepper Motor
- Operating voltage: 8.2V to 45V
- Continuous current per phase: 1.5 Amp
- Maximum current per phase: 2.2 Amp
- Minimum logic voltage: 2.5V
- Maximum logic voltage: 5.25V
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Compatible with 3V3 and 5V microcontrollers
- Our Board comes with 0.1 Ohm Sensor resistors
- The Correct current decay mode (fast decay or slow decay) selected by chopping control
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Short-to-ground and shorted-load protection
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
DS1302 Trickle Charge Timekeeping Chip IC
- Trickle Charge Timekeeping Chip
- Supply Voltage range: 2V to 5.5V
- Input Logic 1 Min Voltage: 2 V
- Input Logic 0 Min Voltage: -0.3V
- Output Logic 1 Min Voltage: 2.4V
- Output Logic 0 Max Voltage: 0.4V
- Crystal Capacitance: 6pF
- Clock Frequency: 2MHz
- Active Supply Current: 1.2mA
- Clock Rise and Fall Time:Â 500ns
- Package: DIP-8
