LNK304PN Off-line Switcher IC
- Drain Voltage: -0.3 V to 700 V
- Peak Drain Current: 400 mA
- Feedback Voltage: -0.3 V to 9 V
- Feedback Current: 100 mA
- Operating Junction Temperature: -40 °C to 150 °
- Lowest Component Count, Energy-Efficient Off-Line Switcher IC
- Lowest cost and component count buck converter solution
- Fully integrated auto-restart for short-circuit and open loop fault protection – saves external component costs
- 66 kHz operation with accurate current limit – allows low cost off-the-shelf 1 mH inductor for up to 120 mA output current
CA3140 Operational Amplifier IC
D8251 Programmable Communications Interface IC
DMO565R Power Switch IC
LM1267 RGB Video Amplifier IC
- 150 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
- Programmable 110 MHz to 150 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0˚C to 70˚C
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150˚C ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265˚C
- Thermal Resistance to Ambient (θJA) 51˚C/W
TNY264PN Off-line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 400mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 32Ω
- Package: DIP-8B
- Fully integrated auto-restart for short circuit and open loop fault protection – saves external component costs
- Frequency jittering dramatically reduces EMI (~10 dB) – minimizes EMI filter component costs
- Lowest component count switcher solution
74LS93 4-Bit Binary Counter IC
- 4-Bit Binary Counter
- Supply Voltage Range: 4.75V to 5.25V
- Supply Current Max.: 15mA
- Clock Frequency Max.: 32MHz
- HIGH Level Input Voltage Min.: 2V
- LOW Level Input Voltage Max.: 0.8V
- HIGH Level Output Voltage Min.: 2.7V
- LOW Level Output Voltage Max.: 0.5V
- High level Output Current Max.: -0.4mA
- Low level Output Current Max.: 8mA
- Input Clamp Voltage Max.: -1.5V
- Propagation Delay Time Max.: 16ns
- Package: DIP-14
CD4033BE CMOS Decade Counter Divider IC
HT12E RF Encoder IC for wireless communication
MIP2C4 Power Device IC
PIC12F508 Microcontroller IC
- Maximum CPU Frequency: 4 MHz
- Architecture: 8 bit
- Program Memory (Flash): 0.75kb
- RAM: 25 byte
- Internal Oscillator: 4 MHz
- of Pins: 8
- Voltage: 2V - 5.5V
- 4 MHz Precision Internal Oscillator: - Factory calibrated to ±1%
- In-Circuit Serial Programming™ (ICSP™) •
- In-Circuit Debugging (ICD) Support
- Power-On Reset (POR)
- Device Reset Timer (DRT) •
- Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation
- Programmable Code Protection
- Multiplexed MCLR Input Pin
- Internal Weak Pull-Ups on I/O Pins
- Power-Saving Sleep mode
- Wake-Wp from Sleep on Pin Change
- Selectable Oscillator Options:
- Operating Current: - < 175 μA @ 2V, 4 MHz, typical
- Standby Current: - 100 nA @ 2V, typical
- Low-Power, High-Speed Flash Technology: - 100,000 Flash endurance - > 40 year retention
- Fully Static Design
- Wide Operating Voltage Range: 2.0V to 5.5V
- Wide Temperature Range: