Showing 1–12 of 15 results

50~100 DC12V W1209 Digital Thermostat Thermometer Temperature Control

₹250.00
  • Supply Voltage: 12V
  • Measuring Inputs: NTC10K
  • Measurement Accuracy: 0.1 C
  • Control Accuracy: 0.1 C
  • Refresh Rate: 0.5 Seconds
  • Cable Length: 0.5 Meter
  • Output Type: 1 Channel Relay Output
  • Capacity: 10A
  • Temperature Control Range: -50 ~ 110 C
  • Resolution at -9.9 to 99.9: 0.1 C
  • Resolution at all other temperatures: 1 C
  • Temperature: -10 ~ 60 C
  • Humidity: 20-85%
  • Dimensions:48mm x 40mm x 14mm

Acrylic case for XH-W1209 temperature controller

₹99.00 inc. GST
• Case for : XH-W1209 Temperature Control • Good Quality Material • Crystal Clear • Color : Transparent • Material : Acrylic case • Length: 59mm • Width: 51mm • Height: 3mm • Weight: 25 gm

AM2302 WIRED MODULE

₹749.00 inc. GST
  • Low cost
  • 3V to 5V power and I/O
  • 5mA max current use during conversion (while requesting data)
  • Good for 0-100% humidity readings with 2-5% accuracy
  • Good for -40 to 80°C temperature readings ±0.5°C accuracy
  • No more than 0.5 Hz sampling rate (once every 2 seconds)
  • 3 wires 23cm long (9")
  • Dimensions: 27x 58.75 x 13.30mm

DHT11 MODULE

₹150.00 inc. GST
  • Operating Voltage: 3.5V to 5.5V
  • Operating current: 0.3mA (measuring) 60uA (standby)
  • Output: Serial data
  • Temperature Range: 0°C to 50°C
  • Humidity Range: 20% to 90%
  • Resolution: Temperature and Humidity both are 16-bit
  • Accuracy: ±1°C and ±1%
  • Low power consumption.
  • The module can detect the surrounding environment of the humidity and temperature
  • High reliability and excellent long-term stability
  • The output from the digital output
  • Has fixed bolt hole and easy installation

DHT11 Sensor

₹155.00 inc. GST
  • Operating Voltage: 3.5V to 5.5V
  • Operating current: 0.3mA (measuring) 60uA (standby)
  • Output: Serial data
  • Temperature Range: 0°C to 50°C
  • Humidity Range: 20% to 90%
  • Resolution: Temperature and Humidity both are 16-bit
  • Accuracy: ±1°C and ±1%

DHT21 AM2301 Digital Temperature Humidity Sensor module SHT11 SHT15 Arduino

₹750.00 inc. GST
  • Power: DC 3.3-5.2V
  • Humidity: 0~99.9% RH
  • Temperature: -20 ~ 60℃
  • Precision: ±3% RH, ±0.5 ℃
  • Output: Digital (1 wire)
  • Accurate, durable and high quality
  • 4 pin package
  • Ultra-low power
  • No additional components
  • Excellent long-term stability
  • All calibration, digital output
  • Completely interchangeable
  • Long distance signal transmission
  • Relative humidity and temperature measurement
  • Dimension: 60 x 27 x 14mm

DHT22 MODULE

₹500.00 inc. GST
  • Power supply: 3.3-5.5VDC
  • Operating range: humidity 0-100%R
  • Ultra-Low Power.
  • No Additional Components.
  • Long-Distance Signal Transmission.
  • All Calibration, Digital Output & Completely Interchangeable.
  • Relative Humidity & Temperature Measurement.
  • Humidity Measurement Precision: 2-5% RH.
  • Temperature Measurement Precision: 0.5 deg C.
  • Calibrated digital signal
  • Outstanding long-term stability

DHT22 Sensor

₹450.00 inc. GST
  • Type: AM2302.
  • Ultra-Low Power.
  • No Additional Components.
  • Long-Distance Signal Transmission.
  • All Calibration, Digital Output & Completely Interchangeable.
  • Relative Humidity & Temperature Measurement.
  • Humidity Measurement Precision: ±2-5% RH.
  • Temperature Measurement Precision: ±0.5 deg C.

DS18B20 PROBE

₹220.00 inc. GST
  • Usable temperature range: -55 to 125°C (-67°F to +257°F)
  • 9 to 12-bit selectable resolution
  • Uses 1-Wire interface- requires only one digital pin for communication
  • Unique 64 bit ID burned into a chip
  • Multiple sensors can share one pin
  • ±0.5°C Accuracy from -10°C to +85°C
  • Temperature-limit alarm system
  • Query time is less than 750ms
  • Usable with 3.0V to 5.5V power/data
  • Each pin uses a heat-shrinkable tube to prevent short circuit, internal sealing glue.
  • Stainless steel tube encapsulation waterproof moistureproof prevents rust.
  • Stainless steel tube 6mm diameter by 30mm long.
  • Contains DS18B20 temperature sensor.
  • Uses 1-Wire interface- requires only one digital pin for communication.
  • Unique 64 bit ID burned into the chip.
  • Multiple sensors can share one pin.
  • Temperature-limit alarm system.
  • Without the external components, the unique single bus.

Smart 3pin DHT11 Digital Temperature And Relative Humidity Sensor Module + PCB

₹199.00
  • Operating Voltage: 3.5V to 5.5V
  • Operating current: 0.3mA (measuring) 60uA (standby)
  • Output: Serial data
  • Temperature Range: 0°C to 50°C
  • Humidity Range: 20% to 90%
  • Resolution: 1%RH humidity, temperature 1
  • Accuracy: ±1°C and ±1%
  • Low power consumption.
  • The module can detect the surrounding environment of the humidity and temperature
  • High reliability and excellent long-term stability
  • The output from the digital output
  • Has fixed bolt hole and easy installation

STC-1000 220V AC All Purpose Digital Temperature Controller Module

₹999.00 inc. GST
  • Power supply: 220VAC±10%, 50/60Hz.
  • Sensor Type: NTC Sensor
  • Resolution: 0.1°C.
  • Accuracy: ±1°C (-50 – 70°C).
  • Sensor error delay: 1 minute.
  • Power consumption: ≤3W.
  • Front panel size : 75 x 34.5mm
  • Mounting size: 71x 29mm.
  • Sensor length: 1m (include the probe).
  • Temperature Measuring Range: -50 to 90°C
  • Storage temperature : -30 - 75°C;
  • Relative humidity : 20% - 85%
  • Output Relay Capacity : Heating: 10A/220VAC; Cooling: 10A/220VAC
  • Mini temperature controller.
  • With a clear LED display for better readability.
  • Dual heating and cooling control.
  • Automatic over-temperature alarm
  • Relay output.
  • Dimension: 75x 34.5x 85mm

XH-W1219 12V Digital Display Temperature Controller Module W/NTC Waterproof Temperature Sensor

₹199.00 inc. GST
  • Control Range: -50~110 °C
  • Control Precision: 0.1 °C
  • Measuring Input: NTC10K waterproof sensor L=0.5m.
  • High-Temperature Alarm: -49~110 °C
  • Input Voltage: DC 12V
  • Output Type: Relay output 10A (max)
  • Return Difference Setting: 0.1~30 °C
  • Delay Starting: 0-10min
  • Temperature Calibration: -10~10 °C